English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 41634501      線上人數 : 2698
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/93029


    題名: 混合波束成形的波束分配演算法 用於下行鏈路 MIMO LEO 衛星通訊;Beam Allocation Algorithms with Hybrid Beamforming for Downlink MIMO LEO Satellite Communications
    作者: 陳茗薇;Chen, Ming-Wei
    貢獻者: 通訊工程學系
    關鍵詞: 編碼簿;波束配置;衛星通訊系統;大規模多輸入多輸出;混合波束成形;多使用者;Codebook;Beam allocation;Satellite Communication;Massive MIMO;Hybrid Beamforming;Multi-user
    日期: 2024-01-09
    上傳時間: 2024-09-19 16:39:01 (UTC+8)
    出版者: 國立中央大學
    摘要: 在第六代行動通訊( 6G ),行動通訊與各種近端傳輸技術、低軌道衛星通訊系統以及包括毫米波在內等創新通信技術等將融合為一體,逐步實現不管是何時何地皆可以無縫式接收及覆蓋。然而,低軌道衛星通訊系統在第六代(6G)行動通訊中是一項新興的候選技術。
    本文中,我們提出大規模多輸入多輸出(MIMO)低地球軌道(LEO)衛星通訊(SATCOM)基於全連接架構的混合波束成形。假設已知通道狀態資訊(CSI),我們可以透過已知的通道狀態資訊,設計混合發射器及混合接收器。先前有學者針對類比端進行波束設計,建立編碼簿,以波束形成增益 (Beamforming Gain) 達到最大為出發點,配置波束,指向訊號方向。前面學者所提的配置波束方法,複雜度較高。本文主要提出低複雜波束配置演算法,以達到最高傳送資料速率為出發點,配置波束。最後,選擇接下來要服務的使用者,是以SINR的大小做挑選,以確保本文提出的演算法選出的使用者與前面學者所提出之結果不會相差甚遠。這代表接下來須服務的使用者是有良好的通道,可以帶來較佳的通訊環境。總結,在本文所提出的演算法,與先前學者所提出的方法挑選接下來要服務的使用者的結果並沒有相差甚遠,且降低複雜度。
    ;The sixth generation of mobile communications (6G) will integrate mobile communications with Near Field Communication (NFC), the Low Earth Orbit (LEO) satellite communications systems (SATCOM), and innovative communications technologies including millimeter waves, and gradually achieve seamless reception and coverage no matter when and where. LEO satellite communication systems are increasingly considered as a potential technology for the sixth generation (6G) of mobile communications.
    In the paper, we introduced a hybrid beamforming approach based on a fully connected architecture for massive Multiple-Input Multiple-Output (MIMO) Low Earth Orbit (LEO) satellite communications. Assuming that the channel state information (CSI) is known, we can design hybrid precoders and combiners based on the known channel status information. Previously, some scholars conducted analog beamformer design, making a beamforming codebook, based on the maximum beamforming gain to allocate analog beamformer and point the signal direction. The beam allocation algorithm proposed by previous scholars, but the complexity is high. This article mainly proposed a low-complexity beam allocation algorithm, based on achieving the highest transmission data rate, proposing an algorithm to allocate beamformer, and finally selecting the users to be served next based on the Signal to Interference plus Noise Ratio (SINR), to ensure that there will not a big gap between our algorithm and previous algorithm of results. This means that the users to be served next have a better channel, which can bring about a better communication environment. The proposed algorithm is not far different from the algorithm proposed by scholars in selecting the users to be served next, it reduces the complexity.
    顯示於類別:[通訊工程研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML9檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明