新式ZI型雙包絡蝸桿與螺旋齒輪組設計及接觸分析;Design and Tooth Contact Analysis of a Novel ZI-Type Double-Enveloping Worm and Helical Gear Set

NCU Institutional Repository > 工學院 > 機械工程研究所 > 博碩士論文 > Item 987654321/93879

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/93879

題名:	新式ZI型雙包絡蝸桿與螺旋齒輪組設計及接觸分析;Design and Tooth Contact Analysis of a Novel ZI-Type Double-Enveloping Worm and Helical Gear Set
作者:	劉俊廷;Liu, Chun-Ting
貢獻者:	機械工程學系
關鍵詞:	ZI型雙包絡蝸桿;螺旋齒輪齒面修整;齒面接觸分析;接觸軌跡;接觸齒印;組裝誤差;傳動誤差;ZI-Type Double-Enveloping Worm;Helical Gear Modification;Tooth Contact Analysis;Contact Path;Contact Pattern;Transmission Error
日期:	2023-11-29
上傳時間:	2024-09-19 17:44:11 (UTC+8)
出版者:	國立中央大學
摘要:	蝸桿蝸輪組為兩軸交錯之齒輪機構，依設計方法不同可分為圓柱型與雙包絡蝸桿蝸輪組，其中雙包絡蝸桿蝸輪組相較圓柱型蝸桿蝸輪組擁有高接觸率、傳動效率高以及承載能力大等優點。本論文旨在分析新式ZI型雙包絡蝸桿與螺旋齒輪之特性，根據齒輪原理，採用齒條刀建立螺旋齒輪齒面數學模式，並以其齒形作為產形輪，推導與產形輪共軛之新式ZI型雙包絡蝸桿，再利用蝸桿與磨輪之相對運動關係得到磨輪齒形，同時配合B-spline函數擬合出磨輪之輪廓曲線。接著透過產形輪與蝸桿齒面之關係，探討共軛齒輪組瞬時接觸線與接觸區域。為了將齒輪對之接觸型式改為點接觸，提出五種齒輪修整方法，對螺旋齒輪齒面分別進行齒形修整、導程隆齒修整、螺旋角修整，以及增加蝸桿之產形輪齒數，再將螺旋齒輪三種修整方式整合，進行齒面雙隆齒修整。後續利用拓樸誤差方式，分析螺旋齒輪齒面修整趨勢。最後，進行接觸軌跡、接觸齒印與傳動誤差等無負載齒面接觸分析，並探討在組裝誤差下對齒輪組的嚙合影響。;The worm gear set is a gear mechanism with two crossed axes. It can be divided into cylindrical and double-enveloping worm gear sets according to different design methods. The double-enveloping worm drive has the advantage of higher contact ratio, higher transmission efficiency and larger load capacity than the cylindrical worm drive. The purpose of this study is to analyze the characteristics of a novel ZI-type double-enveloping worm and helical gear set. According to the theory of gearing, the rack cutter is used to establish a mathematical model of the helical gear tooth surface, and its tooth shape is used as the media gear to derive a novel ZI-type double-enveloping worm that is conjugated with the media gear. Based on the relative motion relationship between the worm and the grinding wheel to obtain the grinding wheel profile, and the profile curve of the grinding wheel is fitted with the B-spline function. Subsequently, through the relationship between the media gear and the worm tooth surface, the instantaneous contact line and contact area of the conjugate gear set were discussed. In order to change the tooth contact type from line contact to point contact, five methods were proposed on the gear tooth modified including tooth profile modification, lead crowning modification, helix angle modification, increasing the number of teeth of the media gear, and double crowning modification that integrates the three methods of the helical gear. Then, the topological error method was used to analyze the trend of the helical gear tooth surface modified. Finally, the contact paths, contact patterns and transmission errors were calculated by unloaded tooth contact analysis. The effects of assembly errors on the gear set were also investigated.
顯示於類別:	[機械工程研究所] 博碩士論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	21	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....