English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 94201/94201 (100%)
造訪人次 : 80418394      線上人數 : 109
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    NCU Institutional Repository > 行政單位 > 秘書室 > 期刊論文 >  Item 987654321/104762


    請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/104762


    題名: Impact of flow-corrective insert on flow patterns in two-dimensional moving bed
    作者: 蕭述三;Hsiau, Shu-San;Smid, Jiri;Chyou, Yau-Pin;Liu, Ti-Chen;Huang, Ta-Ching;Hsu, Chia-Jen
    貢獻者: 秘書室
    關鍵詞: Flow-corrective insert;Granular moving bed;Internal flow pattern;Two-dimensional apparatus
    日期: 2013-11-01
    上傳時間: 2026-04-23 11:57:32 (UTC+8)
    出版者: Elsevier;Elsevier B.V
    摘要: 摘要: •We show how to demonstrate a mass flow of granular media in a 2D apparatus.•A flow corrective insert could change powder from funnel flow to mass flow.•Velocity vectors of tracer particles are evaluated in four horizontal levels.•Vertical shift of insert may make a function of insert inefficient. This paper presents the study of the flow patterns inside a granular moving bed in a quasi-two-dimensional (2D) model of a granular moving bed filter (GMBF) vessel with vertical walls and a mass flow hopper. Fine quartz sand was chosen as the granular filter media in experiments. The related flow properties were measured by a Jenike Shear Tester. According to the flow properties of fine silica sand and Johanson's theory, a 2D moving-bed apparatus was built, with transparent walls and the flow-corrective insert to diminish the quasi-stagnant zones along the side walls. The flow patterns and velocity profiles of silica sand in the system with flow-corrective insert were studied experimentally, and the effect of the location of the flow-corrective insert on the internal flow patterns was investigated. The optimal placement of flow-corrective insert according to Johansson's theory was demonstrated to efficiently diminish the quasi-stagnant zones near the side walls. Little vertical shift of the flow-corrective insert from optimal position changed the stable and uniform mass flow pattern of moving bed into the funnel flow.
    出版者: Elsevier B.V
    出版日期: 2013-11-01
    出處: Chemical Engineering and Processing: Process Intensification, 2013-11, Vol.73, p.7-15
    版權: 2013 Elsevier B.V.
    識別號: ISSN: 0255-2701
    識別號: EISSN: 1873-3204
    識別號: DOI: 10.1016/j.cep.2013.07.001
    顯示於類別:[秘書室] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML42檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明