Effects of highly stressed volume on fatigue strength of austempered ductile irons

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26961

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26961

题名:	Effects of highly stressed volume on fatigue strength of austempered ductile irons
作者:	Lin,CK;Lee,WJ
贡献者:	機械工程研究所
关键词:	HIGH-CYCLE FATIGUE;CAST-IRON;MICROSTRUCTURE
日期:	1998
上传时间:	2010-06-29 18:04:15 (UTC+8)
出版者:	中央大學
摘要:	The relationship between fatigue strength and highly stressed volume was investigated with various combinations of specimen configurations and loading modes for austempered ductile irons (ADIs) in different heat treatments. Fatigue specimens were prepared in different notch geometries with stress concentration factors ranging from 1 to 2.64. High-cycle fatigue experiments were conducted in both rotating-bending and axial loading to determine the relevant stress-life curves. Experimental results indicate that the fatigue strength of ADI is higher when austempered at 360 degrees C in comparison to that austempered at 300 degrees 0C due to the greater toughness present. The fatigue limit in rotating-bending is higher than that in axial loading because of a smaller volume of high stress. ADI austempered at 300 degrees C is more susceptible to notch effects on fatigue strength due to its harder, more brittle matrix structure. The fatigue limit of ADI is generally decreased with an increase in the volume of material subjected to high stress. A prediction equation for the fatigue limits of ADIs at different heat-treated conditions is established in terms of highly stressed volume and toughness. (C) 1998 Elsevier Science Ltd.
關聯:	INTERNATIONAL JOURNAL OF FATIGUE
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	488	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....