Three-dimensional positioning using SPOT stereostrips with sparse control

NCU Institutional Repository > 研究中心 > 太空及遙測研究中心 > 期刊論文 > Item 987654321/27676

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/27676

题名:	Three-dimensional positioning using SPOT stereostrips with sparse control
作者:	Chen,LC;Chang,LY
贡献者:	太空及遙測研究中心
关键词:	GENERATION;TERRAIN;IMAGERY
日期:	1998
上传时间:	2010-06-29 18:51:59 (UTC+8)
出版者:	中央大學
摘要:	This paper describes an experiment for a proposed scheme using onboard satellite data to perform three-dimensional positioning for a pair of SPOT stereostrips. Based on the sampling geometry of French SPOT satellite images, we first adjusted the on-board parameters by incorporating a small number of ground control points (GCPs). Then a procedure for three-dimensional modeling was performed as follows. The central features of the proposed scheme are: (1) use of onboard data to initialize orbit parameters and attitude data for the satellite; (2) correction of on-board parameters with low order polynomials; (3) use of reverse transformation to check the collinear relationship between object space and image space for the GCPs; (4) adjustment of attitude data for the satellite to minimize the error in terms of the GCP collinearity; and (5) space intersection. Experimental results indicate that, for a SPOT panchromatic stereostrip with a 0.6 base-to-height ratio and a 45 km by 280 lan stereo model area, the root-mean-square-error for 3-D positioning is less than 8 m in each direction when only 4 GCPs are used.
關聯:	JOURNAL OF SURVEYING ENGINEERING-ASCE
显示于类别:	[太空及遙測研究中心] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	545	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing