The impact of flow distributors on the performance of planar solid oxide fuel cell

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/50177

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50177

题名:	The impact of flow distributors on the performance of planar solid oxide fuel cell
作者:	Huang,CM;Shy,SS;Li,HH;Lee,CH
贡献者:	機械工程學系
关键词:	RE-OXIDATION;SOFC;MECHANISMS;SIMULATION
日期:	2010
上传时间:	2012-03-27 17:05:34 (UTC+8)
出版者:	國立中央大學
摘要:	This paper presents a newly established testing rig for planar solid oxide fuel cell. Two sets of nearly identical single-cell stacks except using different designs of flow distributors are measured to show how exactly the cell performance of such single-cell stacks would vary with a change in the degree of flow uniformity. It is found that by using small guide vanes around the feed header of commonly used rib-channel flow distributors to improve effectively the degree of flow uniformity, the power density of the single-cell stack can be increased by 10% as compared to that without using guide vanes under exactly the same experimental conditions. Also discussed are the start-up procedure and effects of hydrogen and air flow rates varying from 0.4 slpm to 1 slpm on cell performance of these two single-cell stacks which are measured over a range of the operating temperature varying from 650 degrees C to 850 degrees C. After 100h of continuous cell operation, the examination of the reduction and oxidation stability of the anodic surface reveals that the improvement of flow uniformity in flow distributors is useful to achieve a more balanced use of the anodic catalyst. (C) 2010 Elsevier B.V. All rights reserved.
關聯:	JOURNAL OF POWER SOURCES
显示于类别:	[機械工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	407	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....