使用共平面波導饋入的多頻帶槽孔偶極天線設計

NCUIR > College of Electrical Engineering & Computer Science > Graduate Institute of Electrical Engineering > Electronic Thesis & Dissertation > Item 987654321/65804

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/65804

Title:	使用共平面波導饋入的多頻帶槽孔偶極天線設計
Authors:	陳宥竹;Chen,You-Jhu
Contributors:	電機工程學系
Keywords:	槽孔偶極天線;多頻帶天線;共平面波導;三頻天線;五頻天線;slot dipole antenna;multi-band antenna;coplanar waveguide;tri-band antenna;penta-band antenna
Date:	2014-08-15
Issue Date:	2014-10-15 17:10:43 (UTC+8)
Publisher:	國立中央大學
Abstract:	本篇論文設計了兩個多頻帶天線的架構。第一個天線是第三章所介紹的三頻天線，第二個天線是第四章所介紹的五頻的天線。兩個天線皆為印刷式共平面波導饋入的多頻帶槽孔偶極天線，同樣都是利用磁流共振的路徑增加來達到多頻帶的效果。三頻天線是在左右兩邊的槽孔內，各加入兩個大小不同的 C 形金屬環之後，達到三個頻帶的效果。五頻天線是在左右兩邊的槽孔內，各加入一片金屬片，但是兩片金屬片上面有長度不同的四條槽孔線，可以達到五個頻帶的設計。兩支天線的模擬和量測大致上都相符合。兩支天線量測到的輻射場形，在每個通帶下，都類似偶極天線的輻射場形，並且量測到的天線增益皆有 5 dBi到 6 dBi。;In this thesis, tri-band and penta-band antenna designs are proposed. The tri-band antenna design is described in chapter 3. The penta-band antenna design is described in chapter 4. Two antenna designs are printed multi-band slot dipole antenna. They are fed by coplanar waveguide. The same principle of two antenna designs is to increase more magnetic current resonant paths that can achieve multi-frequency operation. The tri-band antenna design is achieved by adding two different size C-shape metal strips into each slot. The penta-band antenna design is achieved by adding a metal sheet which embedded four different length slot lines into each slot. Simulation and measurement of two antennas show good agreement. The measured radiation power patterns of two antennas in each band are similar to the dipole antenna. The measured antenna gains are about 5 dBi to 6 dBi.
Appears in Collections:	[Graduate Institute of Electrical Engineering] Electronic Thesis & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	787	View/Open

社群 sharing

Loading...