以自由曲面之優化方法設計二次光學元件;Optimization Method of Free-form Surface used design Secondary lens

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/68314

Title:	以自由曲面之優化方法設計二次光學元件;Optimization Method of Free-form Surface used design Secondary lens
Authors:	林子堯;Yao,Lin-Tzu
Contributors:	光電科學與工程學系
Keywords:	自由曲面
Date:	2015-07-24
Issue Date:	2015-09-23 11:19:38 (UTC+8)
Publisher:	國立中央大學
Abstract:	在本論文中，基於基本幾何光學原理之下，建構透鏡式與反射杯兩種自由曲面二次光學系統的初始系統模型，搭配使用 TracePro 軟體的 2D/3D 互動式優化器繪製模型，使用Downhill simplex method進行自由曲面的自動優化，將直徑 300mm 表面光源的二次光學系統收光角度設計在 9 度以內。由此方法可以避免不斷重複的調整模型和重新設置參數，大幅縮短所花費的時間，在短時間之內就能優化出精準配光的自由曲面光學元件，而設計出的自由曲面二次元件與相同尺寸之非自由曲面元件，其收光角度優化了15度~17度。;In this thesis, we built two types of initial model of free-form surface secondary optical system, lens and reflector based on principles of geometry optics. Then use 2D/3D interactive optimizer of TracePro to create initial model, and automatic optimization of free-form surfaces. The beam angle (50% lv) of the secondary optical system on 300mm diameter surface light source is 9 degrees or less. Apply this method, we avoiding repeated re-set parameters and adjust model, significantly reducing the time it takes. Finally we got the best model of high precision free-form surface secondary optical element in a shorter time.
Appears in Collections:	[Graduate Institute of Optics and Photonics] Electronic Thesis & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	451	View/Open

社群 sharing

Loading...