Q-頻帶接收機前端被動電路設計

NCU Institutional Repository > 資訊電機學院 > 電機工程研究所 > 博碩士論文 > Item 987654321/69065

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/69065

题名:	Q-頻帶接收機前端被動電路設計
作者:	楊智名;Yang,Chih-Ming
贡献者:	電機工程學系
关键词:	Q頻帶;帶通濾波器;吸收式帶阻濾波器;具吸收式止帶之帶通濾波器;正交模態轉換器;砷化鎵;Q-band;BPF;ABSF;OMT;GaAs
日期:	2015-08-31
上传时间:	2015-09-23 15:12:54 (UTC+8)
出版者:	國立中央大學
摘要:	本論文著重在ALMA(Atacama Large Millimeter/Submillimeter Array) 第一頻帶(Band-1) 無線電波望遠鏡接收機前端之被動電路設計。接收機前端架構為由圓形號角天線(Horn Antenna) 再接至正交模態轉換器(OMT, Orthomode Transducer)，經由OMT將接收到的電磁波訊號拆解成兩正交之訊號，交由後級低雜訊放大器先經過濾掉鏡像訊號之帶通濾波器，在接至解決LO-to-RF訊號之吸收式帶止濾波器，最後傳遞到混頻器將訊號降至中頻。首先，延續過去的研究，帶通濾波器部分選用Trisection為主體架構，此架構能在低頻側提供一傳輸零點提高選擇度，且有電路面積較小的優點，實作在砷化鎵製程以提高系統整合度。再者，選用耦合線架構之帶止濾波器，並引入適當電阻值，能夠有效吸收止帶內之反射訊號，以達到吸收式止帶效果，並實作在砷化鎵製程上。最後，隨著台灣加工廠技術的進步，能夠提供更精細而準確的加工精度，在OMT的Double-Ridge Junction、90-degree Bend-plane、Power Combiner能夠使用更平滑曲線進行設計，在本論文中，提出一適當設計流程，設計出適用於Q-band之OMT，並在最終實作中選用鋁金屬為製作材料。 ;In this study, we focus on ALMA (Atacama Large Millimeter/Submillimeter Array) Band-1 receiver front-end passive circuit design. First block of receiver is circular horn antenna, the second block is the orthomode transducer which could split the radio signal into two orthogonal signal, third block is bandpass filter which could block the lower side mirror signal, the fourth block is absorptive bandstop filter which could solve LO-to-RF leakage signal problem, and the final block is mixer which could down convert RF signal to intermediate frequency. First, carrying on the past studies, we select trisection as our bandpass filter main structure. This structure could provide a transmission zero to enhance selectivity in lower side and has advantage of small cell size. We could fabricate on GaAs process to improve system integration. Second, we select couple line as main structure of bandstop filter and introduce proper resistance which could absorb the reflection signal in stopband effectively to achieve absorptive stopband. We fabricate this circuit in GaAs process. Eventually, we could provide more refined and more accurate process than before with improvement of fabrication technique so that we could use smooth curve line to design our Double-Ridge Junction, 90-degree Bend-plane and Power Combiner of OMT. In this study, we provide a proper design process to design OMT application for Q-band and select metal Al as our fabrication material finally.
显示于类别:	[電機工程研究所] 博碩士論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	562	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....