太陽能模組透光結構改變性能研究;Research on the Change of Light Transmission Structure of Solar Module

NCU Institutional Repository > 理學院 > 光電科學研究所 > 博碩士論文 > Item 987654321/75270

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/75270

题名:	太陽能模組透光結構改變性能研究;Research on the Change of Light Transmission Structure of Solar Module
作者:	徐義盛;Hsu, Yi-Sheng
贡献者:	光電科學與工程學系
关键词:	太陽能模組;表面結構;低反射;Photovoltaic Module;Structure of the surface;Low-reflection
日期:	2017-12-28
上传时间:	2018-01-16 10:42:15 (UTC+8)
出版者:	國立中央大學
摘要:	本論文是針對太陽能模組表面材料進行表面結構處理，提出一款低反射高穿透的太陽能前板取代傳統玻璃；以光學模擬軟體計算不同結構之光穿透效益，再取其較低成本及製作簡易之結構於此前板進行轉印成型後進行太陽能模組封裝，藉由調變角度，探討不同入射光角度對光增益之影響，並驗證與光學模擬之差異；實驗結果得知：此低反射高穿透的前板可降低強光造成的眩光，反射光之光強度由光譜儀，在波長400~700nm進行量測，玻璃之反射光強度與低反射高穿透的太陽能前板比較，其差別由32,566 counts降低至17,101 counts，下降47.5%；表面有微結構之太陽能電池模組相較無結構之太陽能電池模組在直射光的最大功率增益是2.46%，漫射光的最大功率增益是4.73%。;This paper proposes the solar front sheet with low reflection and high transmittance to replace the traditional glass. The light transmission efficiency of different structures is calculated by optical simulation software ,and pick up the structure of the easy to produce with low price to laminate the solar module after the pattern transfer. To discuss the influence of different incident angles on the optical performance and the difference between the experiment product simulation and the software simulation. The experimental results show that the front sheet with low reflection and height transmission efficiency reduce the glare it emerges by strong light. The front sheet compared the intensity of light reflected with the traditional glass by the spectrometer, measured at the wavelength of 400~700nm,and the values from 32,566 counts to 17,101 counts, down 47.5%. The maximum power of the solar module with the structure is better than the solar module without structure about 2.46% in the director ray, and about 4.73% in the diffuse ray.
显示于类别:	[光電科學研究所] 博碩士論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	330	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....