Calibration Study of Low-Noise Detection Chain for Axion Haloscope Search

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/95065

Title:	Calibration Study of Low-Noise Detection Chain for Axion Haloscope Search
Authors:	劉瀚文;Liu, Han-Wen
Contributors:	物理學系
Keywords:	Y因子方法;軸子探測;共振腔輻射熱校正;開關校正;放大鍊校正;約瑟夫森參數放大器;Y-factor method;Axion haloscope detection;Cavity-emitted radiation calibration;On-off calibration;Amplification chain calibration;Josephson parametric amplifier
Date:	2024-07-04
Issue Date:	2024-10-09 15:46:34 (UTC+8)
Publisher:	國立中央大學
Abstract:	軸子作為一種假想粒子，預計在與電磁場交互作用下會轉換為光子。在軸子探測的實驗中，轉換的光子會在共振腔累積。縱使已累積光子作為訊號，訊號強度仍然很弱，因此準確地校正探測鍊的噪聲至關重要。以往的實驗中，利用Y因子方法校正時，必須假設兩條導線的行為彼此類似，再將一條校正鍊的結果類比至探測鍊。現在，利用共振腔輻射熱校正探測鍊可以免去”相似假設”，而且他的可行性也被證實。此外，使用開關校正方法可以決定參量放大器的增益。整合兩種校正方法，共振腔輻射熱校正與開關校正，便能精確的決定軸子探測的系統雜訊。 ;A hypothetical particle, the axion, is predicted to transform into photons when it interacts with an electromagnetic field. In the haloscope detection, the transformed photons accumulate in a cavity. However, the signal produced by the accumulated axions is still weak, so accurately determining the system noise through calibration is crucial. Tradi tionally, the Y-factor calibration method was necessary to assume that cable losses were similar. However, a new method of cavity-emitted radiation calibration has eliminated the need for this assumption and its feasibility is proven. Additionally, the on-off method has been introduced to characterize the gain of the Josephson parametric amplifier. By integrating the results of radiation calibration and on-off calibration, the system noise can be determined accurately.
Appears in Collections:	[Graduate Institute of Physics] Electronic Thesis & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	57	View/Open

社群 sharing

Loading...