應用於數位視頻廣播系統中之自動增益放大器及接受端濾波器設計; Automatic Gain Control and Continuous-Time Receive Filter in DVB-T/H Receiver Design

NCUIR > College of Electrical Engineering & Computer Science > Graduate Institute of Electrical Engineering > Electronic Thesis & Dissertation > Item 987654321/9971

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/9971

Title:	應用於數位視頻廣播系統中之自動增益放大器及接受端濾波器設計;Automatic Gain Control and Continuous-Time Receive Filter in DVB-T/H Receiver Design
Authors:	黃佳淳;Jia-Chun Huang
Contributors:	電機工程研究所
Keywords:	濾波器;自動增益放大器;數位視頻廣播系統;DVB-T/H;AGC;Filter
Date:	2006-07-06
Issue Date:	2009-09-22 12:02:09 (UTC+8)
Publisher:	國立中央大學圖書館
Abstract:	在本論文中，描述一個類比前端電路，主要是以基頻接收端通訊系統應用為目標，應用在數位視頻廣播系統中。內包含一個經由數位控制的自動增益放大器和一個抗混淆濾波器。在接收端的信號路徑上包含一個可程式化增益放大器，這個類比的放大器擁有51dB 的動態增益範圍，並且由一階的數位控制迴路來自動調整其增益量。使其輸出可到達160mVpp。在輸入震幅也是160mVpp 的情況下，經由雙端輸入模擬出的全諧波失真(THD)小於 -60dB。此設計已使用台灣積體電路公司所提供 0.18 微米 CMOS 製程製作。操作在1.8V 電壓下，消耗功率為13 毫瓦。緊接著這個自動增益放大器是一個頻寬為4MHz 的五階Chebyshev 低通濾波器，此外一個運算跨導放大器(OTA)將被運用在這個濾波器中。輸入震幅為160mVpp模擬出的全諧波失真(THD)小於 -60dB。操作電壓在1.8V，此電路將被驗證在佈局後(post-layout)的模擬上。 This paper describes a digitally controlled automatic gain control (AGC) and anti-aliasing filter subsystems for the analog front-end (AFE), in which it can be used to support the digital video broadcasting in DZIF (double conversion with zero second IF) architecture. The receiving path contains a programmable-gain amplifier (PGA) with the self-tuning gain circuit. The dynamic range of the PGA, which is controlled by a digital loop to form a first order system, is 51dB. The third-harmonic distortion is less than -60dB for differential input signal up to 160mVpp. This chip has already been fabricated in a TSMC 0.18μm standard CMOS technology while the supply voltage is 1.8V and its power consumption is 13mW. Following the proposed AGC, a 4-MHz fifth-order Chebyshev low-pass Gm-C filter is also described in detail. In addition, an operational transconductance amplifier (OTA) with an additional enhanced amplifier structure is utilized to perform the voltageto-current conversion. The THD is less than -60dB over the input range of 160mVpp and the supply voltage is 1.8V. This proposed filter has also been completely verified by the post-layout simulation.
Appears in Collections:	[Graduate Institute of Electrical Engineering] Electronic Thesis & Dissertation

Files in This Item:

File	Size	Format

社群 sharing

Loading...