博碩士論文 974201047 詳細資訊




以作者查詢圖書館館藏 以作者查詢臺灣博碩士 以作者查詢全國書目 勘誤回報 、線上人數:91 、訪客IP:3.142.171.180
姓名 張有銍(Yu-Chih Cheng)  查詢紙本館藏   畢業系所 企業管理學系
論文名稱 多品項關聯存貨控制之研究─以SAP ERP系統為例
(Inventory control with multi-product associations implemented on SAP ERP Systems)
相關論文
★ 在社群網站上作互動推薦及研究使用者行為對其效果之影響★ 以AHP法探討伺服器品牌大廠的供應商遴選指標的權重決定分析
★ 以AHP法探討智慧型手機產業營運中心區位選擇考量關鍵因素之研究★ 太陽能光電產業經營績效評估-應用資料包絡分析法
★ 建構國家太陽能電池產業競爭力比較模式之研究★ 以序列採礦方法探討景氣指標與進出口值的關聯
★ ERP專案成員組合對績效影響之研究★ 推薦期刊文章至適合學科類別之研究
★ 品牌故事分析與比較-以古早味美食產業為例★ 以方法目的鏈比較Starbucks與Cama吸引消費者購買因素
★ 探討創意店家創業價值之研究- 以赤峰街、民生社區為例★ 以領先指標預測企業長短期借款變化之研究
★ 應用層級分析法遴選電競筆記型電腦鍵盤供應商之關鍵因子探討★ 以互惠及利他行為探討信任關係對知識分享之影響
★ 結合人格特質與海報主色以類神經網路推薦電影之研究★ 資料視覺化圖表與議題之關聯
檔案 [Endnote RIS 格式]    [Bibtex 格式]    [相關文章]   [文章引用]   [完整記錄]   [館藏目錄]   至系統瀏覽論文 ( 永不開放)
摘要(中) 存貨數量的制訂對企業一直以來都是重要的課題,貨品庫存量不足,可能會導致客戶抱怨,進而流失訂單;貨品庫存量太多,則會增加資金壓力,讓公司有較高的風險虧損,因此,該如何規劃調適公司各項資源進而制定一個適當的服務水準(Service Level,SL)與安全庫存量(Safety Stock,SS)是許多公司正面臨的問題。在過去學術研究中,主要針對以單一品項的數學存貨模型推導為主,而同時考慮多品項安全庫存的存貨模型所能處理的品項有限,且未能針對完成品進行存貨改善,加上根據我們所知,目前全球ERP系統中,並無輔助制訂安全存貨的功能涵蓋在標準的ERP模組中,因此本研究試著在ERP既有的產品資訊與銷貨記錄中,藉由資料探勘(Data Mining)技術中關聯規則(Association Rule)的運用,找出哪幾種產品是具有銷售上的關聯性,並進一步設計演算法來同時調整這些產品的服務水準,最後計算出安全存貨的建議值。
在系統實作應用上,本研究以SAP公司的ECC6.0 ERP系統為基礎,使用ABAP程式語言撰寫所設計的演算法,為了驗證本研究所提出方法的可行性,會以系統銷售的歷史資料進行來進行系統模擬,從模擬結果中可發現,如採用本研究所提的方法,不但能找出銷售關聯性高的產品,且能同時計算出合適的安全存貨量,作為規劃人員的參考依據。
摘要(英) For businesses, the stock has been the formulation of the number of important issues. If the portfolio stock, this could lead to customer complaints, then the loss of orders; if too much inventory of goods, will increase the financial pressure, so the company will have a higher risk of loss. Therefore, how to adapt the company planning the resources, then develop an appropriate service levels and safety stock, many companies are facing problems. In the past academic research, the main items for a single mathematical model is derived mainly inventory, while many items to consider safety stock inventory model can handle limited and items and not for finished goods for inventory improvement. According to our knowledge, the current global ERP system, no auxiliary functions to formulate the safety stock included in the standard ERP modules. Therefore, this study tried to existing product information in the ERP and sales records, data mining technology by the use of association rules to find out what kinds of products with sales of relevance, and further design algorithm to simultaneously adjust the service level of these products, and finally calculate the value of safety stock recommendations. Applications in the system implementation, this study SAP ECC6.0 system based on ABAP programming language used to write the design algorithms. To prove the feasibility of the proposed method, the system will be the historical sales data for system simulation. From the simulation results can be found, such as the use of this research proposed scheme not only able to identify the products with high sales associate, and can also calculate the appropriate safety stock level, as the planners of reference.
關鍵字(中) ★ 關聯規則
★ 安全庫存量
★ 服務水準
關鍵字(英) ★ Safety Stock
★ Service Level
★ Association Rule
論文目次 摘 要 i
Abstract ii
目 錄 iv
圖 目 錄 vi
表 目 錄 viii
第一章 緒論 1
1-1 研究背景與動機1
1-2 研究目的2
1-3 研究架構3
第二章 文獻探討 4
2-1 安全存貨 4
2-2 資料探勘 6
第三章 研究方法 8
3-1 決策方法與流程 8
3-2 演算法步驟 12
3-2-1 多品項購買利用關聯規則 12
3-2-2 修剪關聯規則(Rule Pruning) 13
3-2-3 找出適當的服務水準(SL Tuning) 16
3-2-4 決定出安全庫存量(SS Determinant) 19
3-2-5 計算存貨水準(IL Calculation) 21
第四章 系統實作與驗證 22
4-1 系統資料描述 22
4-2 系統實作 25
4-2-1 產生關聯規則27
4-2-2 規則修剪 28
4-2-3 調整服務水準 29
4-2-4 決定安全存量31
4-2-5 得出存貨水準34
4-3模擬與分析 35
第五章 結論與未來研究 43
參考文獻 44
參考文獻 中文部份
[1] 國立中央大學管理學院ERP中心,ERP企業資源規劃導論,第三版,旗標出版股份有限公司,台北,2008。
[2] 陳景雯,「接單生產環境中BOM內各品項之生產規劃決策問題:模型與應用」,國立中央大學,碩士論文,民國92年。
[3] 侯靜媛,「客製化生產環境下物料清單內各品項之生產策略的決策問題」,國立中央大學,碩士論文,民國95年。
[4] 孫惠明,資料挖掘理論與實務規劃利用,松崗圖書出版股份有限公司,2007。
英文部份
[5] Zhao,X. , Lai,F. and LEE,T.S. ,“Evaluation of safety stock methods in multilevel material requirements planning (MRP) systems”,Production Planning & Control, Vol. 12, NO. 8, pp.794–803, 2001
[6] Sandvig,J.C. ,“Simple solutions aren’t the best ones”,IIE Solutions, Vol. 30, NO.12, pp.28-29, December 1998
[7] Charnes,J.M. ,Marmorstein,H. and Zinn,W. , “Safety stock determination with serially correlated demand in a periodic-review inventory system”, Journal of the Operational Research Society, Vol. 46, NO.8, pp.1006-1013, 1995
[8] Campbell,G.M. ,“Establishing safety stocks for master production schedules”, Production Planning & Control, Vol. 6, NO.5, pp.404-412, 1995
[9] Nechval,N.A. and Nechval,K.N. ,“Applications of invariance to estimation of safety stock levels in inventory model”,Computers & Industrial Engineering Vol.37, NO.1-2 , pp.247-250, 1999
[10] Dar-Ei,E.M. and Malmborg,C.J. ,“Improved strategy for service level-base safety stock determination”, Production Planning & Control, Vol.2, NO.2, pp.116-121, 1991
[11] Glasserman,P. ,“Bounds and asymptotics for planning critical safety stocks”, Operations Research, Vol.45, NO.2, pp.244-257, 1997
[12] Inderfurth,K. and Minner,S. ,“Safety Stocks in multi-stage inventory system”,
European Journal of Operational Research, Vol.106, NO.01, 1998
[13] Bertsimas,D. and Paschalidis,I.CH. ,“Probabilistic service level guarantees in make-to-stock manufacturing systems”, Operations Research,
Vol.49, NO.01, 2001
[14] Grupe,F.H. and Owrang,M.M., “Data base mining discovering new knowledge and coperative advantage” , Information Systems Management, Vol.12, NO.4, pp. 26-31, 1995
[15] Frawley,W.J. , Paitetsky-Shapiro G. and Matheus, C. J. , “Knowledge Discovery in Database:An Overview.,” AI Magazine,Vol.13,NO.3, pp.57-70, 1992
[16] Tsai,CY. ,Tsai,CY. And Huang,PW.,“An association clustering algorithm for can-order policies in the joint replenishment problem”, Int. J. Production Economics, Vol.117, NO.01, pp.30-41, 2009
指導教授 許秉瑜(Ping-Yu Hsu) 審核日期 2010-6-28
推文 facebook   plurk   twitter   funp   google   live   udn   HD   myshare   reddit   netvibes   friend   youpush   delicious   baidu   
網路書籤 Google bookmarks   del.icio.us   hemidemi   myshare   

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明