博碩士論文 975201113 詳細資訊




以作者查詢圖書館館藏 以作者查詢臺灣博碩士 以作者查詢全國書目 勘誤回報 、線上人數:30 、訪客IP:18.222.166.127
姓名 曾信傑(Sin-jie Zeng)  查詢紙本館藏   畢業系所 電機工程學系
論文名稱 使用長饋入線架構研製小型且具有高隔絕度的多工器
(Compact and high-isolation multiplexers using long feeding lines)
相關論文
★ 應用於微波之多頻帶通濾波器之設計★ 使用可開關式帶通濾波器之低相位雜訊雙頻振盪器研製
★ 共平面波導饋入槽孔偶極天線之寬頻與多頻應用★ 可具任意通帶之可調式多工器
★ 利用非對稱步階式阻抗設計寬通帶寬止帶雙工器★ 基於散佈式耦合饋入架構之可開關式帶通濾波器
★ 共平面波導饋入之寬頻雙圓極化天線★ 基於多共振路徑所設計之印刷式多頻帶天線
★ 四通道可切換式帶通濾波器之研究★ 雙模態寬阻帶之基板合成波導濾波器
★ 微小化倍頻壓抑直交分合波器之研製★ 可繞式小型偶極天線之研製
★ 使用多重模態共振器實現多功能帶通濾波器★ 應用於Radio-over-Fiber系統之超高速微波光子發射器
★ 具有寬截止頻帶的帶通濾波器之研製★ 可調式雙模態帶通濾波器之研究
檔案 [Endnote RIS 格式]    [Bibtex 格式]    [相關文章]   [文章引用]   [完整記錄]   [館藏目錄]   [檢視]  [下載]
  1. 本電子論文使用權限為同意立即開放。
  2. 已達開放權限電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。
  3. 請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。

摘要(中) 本論文研究目標為研製小型且具有高隔絕度的多工器。一般的均勻阻抗共振器除了中頻以外也會在其倍頻時共振,而為了研製高隔絕度的多工器,必須要將其倍頻壓抑已減少輸出埠之間的干擾。本論文主要以一長饋入線當作電路的主要架構,並觀察其電流密度分佈,了解在不同擺放位置的耦合型態。而為了將此物理概念量化,本論文萃取了耦合係數和外部品質因素,並藉由將共振器擺放在與其倍頻耦合型態相反的位置以達到倍頻壓抑的效果。接著用此濾波器架構當作基本單一的電路,並提升濾波器設計數目來設計多工器。而此架構所設計的三工器和四工器其量測的隔絕度皆大於40dB。此外,相較於其它有關的論文著作,此論文所提出的架構也有較少電路面積的特性。為了再進一步減少電路設計的面積,本論文將進一步使用步階阻抗共振器來取代均勻阻抗共振器。相較於使用均勻阻抗共振器,使用此架構將會有更小的電路面積跟更高的隔絕度。而上述所研製多工器的設計頻帶皆較為分散,此論文最後將設計一鄰近通帶的三工器,而其同時也具備高隔絕度的特性。
摘要(英) Compact microstrip multiplexers with high isolation are proposed in this thesis. The uniform impedance resonator would resonate at its center and harmonic frequency. To achieve high isolation between channels, the filter is design to suppress its harmonics. To qualify the coupling between the feeding line and resonator, the external quality factor and coupling coefficient are extracted. And this basic block filter is used to design multiplexer. The measured isolations amongst channels are over 40 dB. In comparison with the previous work, the proposed multiplexers perform the feature of high-isolation and compact size. Besides, stepped impedance resonator is used to reduce circuit size. In comparison with the one using uniform resonator, the design using stepped impedance resonator shows smaller circuit size and high isolation. The passbands of the above-mentioned multiplexer are designed at arbitrary frequencies. In this thesis, the triplexer whose passbands design at near frequencies is presented. And this proposed triplexer still has a feature of high isolation.
關鍵字(中) ★ 三工器
★ 多工器
關鍵字(英) ★ multiplexer
★ triplexer
論文目次 摘要 I
Abstract II
致謝 III
目錄 IV
圖目錄 V
表目錄 VII
第一章 簡介 1
1.1 研究動機 1
1.2 相關文獻 2
1.3 章節內容 4
第二章 帶通濾波器基本設計原理 5
2.1 集總式濾波器 5
2.2 分散式帶通濾波器 12
2.3 耦合係數與外部品質因素 17
2.3.1 電耦合 17
2.3.2 磁耦合 19
2.3.3 混合式耦合 21
2.3.4 外部品質因素 22
第三章 倍頻壓抑原理 25
3.1 簡介 25
3.2 寬止帶濾波器設計 25
第四章 使用均勻阻抗共振器架構設計多工器 32
4.1 三工器的設計和量測結果 32
4.2 四工器的設計和量測結果 36
第五章 使用步階阻抗共振器架構設計多工器 40
5.1 步階阻抗共振器的基本原理 40
5.3 四工器的設計和量測結果 47
第六章 鄰近通帶多工器的設計 51
6.1 鄰近通帶對隔絕度的影響 51
6.2 鄰近通帶三工器的設計 52
6.3 負載效應的探討 53
第七章 更高階的多工器設計 55
第八章 結論 57
未來研究 58
參考文獻 59
參考文獻 [1]M. Zewani, and I. C. Hunter, “Design of ring-manifold microwave multiplexers,” in IEEE MTT-S Int. Microwave Symp., Dig., San Francisco, CA, pp. 689 – 692, June 2006.
[2]P.-H. Deng, N.-I. Lai, S.-K. Jeng, and C. H. Chen, “Design of matching circuits for microstrip triplexers based on stepped-impedance resonators,” IEEE Trans. Microw. Theory Tech., vol. 54, pp. 4185-4192, Dec. 2006.
[3]S. Srissathit, S. Patisang, R. Phromloungsri, S. Bunnjaweht, S. Kosulvit, and M. Chongcheawchamnan. “High isolation and compact size microstrip hairpin diplexer,” IEEE Microw. Wireless Compon. Lett., vol. 15, no. 2, pp. 101-103, Feb 2005.
[4]J. Konpang “A compact diplexer using square open loop with stepped impeance resonators,” IEEE Radio and Wireless Symposium., pp. 91-94, 2009.
[5]T. Ohno, K. Wada, and O. Hashimoto “A class of a planar triplexer by manipulating multiple attenuation poles,” European Microwave Conference., pp. 625-628, 2004.
[6]H.-W. Wu, K. Shu, M.-H. Weng, J.-R. Chen, and Y.-K. Su, “Design of a compact microstrip triplexer for multiband applications,” in Proc. Eur. Microwave Conf., 2007, pp. 834 – 837.
[7]C.-F. Chen, T.-Y. Huang, T.-M. Shen, and R.-B. Wu, “A miniaturized microstrip common resonator triplexer without extra matching network,” in Proc. Asia-Pacific Microwave Conference., pp. 1439-1442, 2006.
[8]C.-F. Chen, T.-Y Huang, C.-P. Chou, and R.-B. Wu, “Microstrip diplexer design with common resonator section for compact size but high isolation,” IEEE Trans. Microw. Theory Tech., vol. 54, no. 5, pp. 1945 – 1952, May 2006.
[9]C.-W. Tang, S.-F You, “Design methodologies of LTCC bandpass filters, diplexer, and triplexer with transmission zeros,” IEEE Trans. Microw. Theory Tech., vol. 54, no. 2, pp. 717 – 723, Feb 2006.
[10]D. Orlenko, G.. Sevskiy, T. Kerssenbrock, and P. Heide, “LTCC triplexer for WiMax applications,” in Proc. Eur. Microwave Conf., 2005.
[11]D. M. Pozar, Microwave Engineering. John Wiley & Sons, Inc.,1998.
[12]J.-S. Hong and M. J Lancaster, “Coupling of microstrip square open-loop resonators for cross-coupled planar microstrip filters,” IEEE Trans. Microw. Theory Tech., vol. 44, no. 12, pp. 2099 – 2109, Dec 1996.
[13]R. Levy, “Design synthesis of cascaded quardruplet(CQ) filters,” IEEE Trans. Microw. Theory Tech., vol. 43, pp. 2940 – 2944, Dec 1995.
[14]R. M. Kurzok, “General four-resonator filters at microwave frequencies,” IEEE Trans. Microw. Theory Tech., vol. 14, pp. 295-296, 1996.
[15]R. Levy, “Filters with single transmission zeros at real and imaginary frequencies,” IEEE Trans. Microw. Theory Tech., vol. 24, pp. 172-181, 1976.
[16]J.-S. Hong and M. J Lancaster, “Design of highly selective microstrip bandpass filters with a single pair of attenuation poles at finite frequencies,” IEEE Trans. Microw. Theory Tech., vol. 48, pp. 1098-1107, July 1976.
[17]J.-S. Hong and M. J Lancaster, R. B. Greed, and D. Jedamzik, “Highly selective microstrip bandpass filters for HTS and other applications,” Proceedings of The 28th European Microwave Conference, October 1998, Amsterdam, The Netherlands.
[18]K. Chang, Microwave Ring Circuit and Antenna. New York:Wiley, pp. 311-316, 1996.
[19]J.-S. Hong and M. J Lancaster, Microstrip Filters for RF/Microwave Applications, New York: Wiley, 2001.
[20]C. G. Montgomery, R. H. Dicke, and E. M. Purcell, Principle of Microwave Circuits, McGraw-Hill, New York, 1984, ch4.
[21]L. G. Maloratsky, “Improved BPF performance woth wiggly coupled lines,” Microwave & RF, pp.53-62, April 2002.
[22]K. F. Chang and K. W. Tam, “Miniaturized cross-coupled filter with second and third spurious responses suppression,” IEEE Trans. Microw. Theory Tech., vol. 15, pp. 122-124, Fed 2005.
[23]M. H. Weng, H. W. Wu, and R. Y. Yang, “High spurious suppression of the dual-mode patch bandpass filter using defected ground structure,” IEICE Electric Lett, vol. E87-C, no. 10, pp. 1738-1740, 2004.
[24]R. Y. Yang, M. H. Weng, H. W. Wu, “Dual-mode ring bandpass filter using defected ground structure with wider stopband,” IEICE Electric Lett, vol. E87-C, no. 12, pp. 2150-2156, 2004.
[25]IE3D version 11.1, Zeland Software Inc., Dec. 2005.
[26]G. L. Dai, X. Y. Zhang, C. H. Chan, Q. Xue, and M. Y. Xia, “An investigation of open- and short-ended resonators and their applications to bandpass filters,” IEEE Trans. Microw. Theory Tech., vol. 57, no. 9, pp. 2203 – 2210, Sept. 2009.
[27]X. Y. Zhang, and Q. Xue, “Harmonic-suppressed bandpass filter based on discriminating coupling,” IEEE Microw. Wireless Compon. Lett., vol. 19, no. 11, pp. 695-697, Nov. 2009.
[28]M. Makimoto, and S. Yamashita, “Bandpass filters using parallel coupled stripline stepped impedance resonators,” IEEE Trans. Microwave Theory Tech, vol. 28, no. 12, pp. 1413-1417, Dec 1980.
指導教授 凃文化(Wen-hua Tu) 審核日期 2010-8-27
推文 facebook   plurk   twitter   funp   google   live   udn   HD   myshare   reddit   netvibes   friend   youpush   delicious   baidu   
網路書籤 Google bookmarks   del.icio.us   hemidemi   myshare   

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明