無電鍍鎳多壁奈米碳管對Mg-23.5wt.%Ni共晶合金儲放氫特性之影響

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：10

、訪客IP：3.129.39.54

姓名

江睿彬(Ruei-Bing Chiang) 查詢紙本館藏

畢業系所

機械工程學系

論文名稱

無電鍍鎳多壁奈米碳管對Mg-23.5wt.%Ni共晶合金儲放氫特性之影響
(Effect of the Electroless Ni Multi-wall CNT on the hydrogen storage properties of Mg-23.5wt.%Ni eutectic alloy)

相關論文

★ 非破壞性探討安定化熱處理對Al-7Mg鍛造合金微結構、機械與腐蝕性質之影響	★ 非破壞性探討安定化熱處理對Al-10Mg鍛造合金微結構、機械與腐蝕性質之影響
★ 冷加工與熱處理對AA7055鍛造型鋁合金微結構與機械性質的影響	★ 冷抽量對AA7055(Al-Zn-Mg-Cu)-T6態合金腐蝕性質和微結構之影響
★ 熱力微照射製作絕緣層矽晶材料之研究	★ 分流擠型和微量Sc對Al-5.6Mg-0.7Mn合金微結構及熱加工性之影響
★ 銀對於鎂鎳儲氫合金吸放氫及電化學性質之研究	★ 氧化物催化劑對亞共晶Mg-Ni合金之儲放氫特性研究
★ 熱處理對7050鋁合金應力腐蝕與含鈧鋁薄膜特性之影響研究	★ Ti-V-Cr與Mg-Co基BCC儲氫合金性質研究
★ 鋰-鋁基及鋰-氮基複合儲氫材料之製程開發及研究	★ 銅、鎂含量與熱處理對Al-14.5Si-Cu-Mg合金拉伸、熱穩定與磨耗性質之影響
★ 恆溫蒸發熔煉鑄造製程合成鎂基介金屬化合物及其氫化特性之研究	★ 微量Sc對A356鑄造鋁合金機械性質之影響
★ 熱處理對車用鋁合金材料熱穩定性與表面性質之影響	★ 鍶改良劑、旋壓成型及熱處理對A356鋁合金磨耗腐蝕性質之影響

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

本研究利用熔煉法製備Mg-23.5wt.%Ni共晶合金，再利用球磨法合成含有經無電鍍鎳處理之5wt.%多壁奈米碳管(Electorless Nickel Multi Wall Carbon Nanotubes，EN-MWCNT )之複合儲氫材料，並藉由PCI及DSC測試，研究無電鍍鎳多壁奈米碳管對Mg-23.5wt.%Ni共晶合金儲放氫特性之影響。
研究中發現，無電鍍處理可將鎳析鍍於多壁奈米碳管上，其析鍍金屬顆粒大小為奈米等級，由於經無電鍍鎳處理之多壁奈米碳管具有移轉效應(spillover effect)，其吸氫效果比未經無電鍍鎳處理之多壁奈米碳管佳，移轉效應可降低氫分子分解成氫原子所需的動能，並提供氫原子有利接觸合金之通道，加速氫化反應。球磨法亦可於多壁奈米碳管上生成缺陷提高其表面能，加強物理吸附能力。藉由添加無電鍍鎳多壁奈米碳管可改善Mg-23.5wt.%Ni共晶合金於低溫下之吸氫反應，於160℃與100℃下分別有4.39wt.%及4.22 wt.%的儲氫量。由DSC測試曲線得知，鑄態Mg-23.5wt.%Ni共晶合金添加無電鍍鎳多壁奈米碳管之MgH2放氫起始溫度(onset temperature)為363℃，相較於純鎂之放氫起始溫度408℃降低約45℃，但對於降低Mg2NiH4放氫起始溫度沒有明顯效果。

摘要(英)

Mg-23.5wt.%Ni eutectic alloy were prepared by traditional melting and mixed with 5wt.% electorless nickel multi-wall carbon nanotubes by high energy ball milling for 5h，and we studied the effect of electroless nickel multi-wall carbon nanotubes on the hydrogen storage properties of Mg-23.5wt.%Ni eutectic alloy by PCI and DSC.
The experimental results show that electroless platting can get uniformly distributed nanoparticles on the surface of multi-wall carbon nanotubes which provied a spillover effect，thease reaction acceleration the dissociation of hydrogen molecules and improved the hydrogen storage properties at lower temperatures，the activated Mg-23.5wt.%Ni+5wt.%EN-MWCNT absorbed 4.22wt.% H2 and 4.39wt.% H2 at 100℃and160℃ for 60 min under 40 atm H2，the amount of dehydriding of the sample are nearly zero at 250℃. The DSC curves reveal endothermic peaks associated with hydride decomposition，the onset temperature of MgH2 is 363 ℃for the sample containing 5wt.% EN-MWCNT，which is lower than for the Mg sample(408 ℃) .

關鍵字(中)

★ PCI
★ Mg-23.5wt.%Ni
★ XRD
★ 儲氫合金

關鍵字(英)

★ Mg-23.5wt.%Ni、XRD、PCI

論文目次

中文摘要 ii
Abstract iii
誌謝 iv
目錄 v
圖目錄 vi
表目錄 viii
一、文獻回顧 1
1-1前言 1
1-2儲氫合金儲放氫基本原理 3
1-3 Mg-Ni儲氫合金簡介 6
1-4催化劑-過渡元素、奈米碳管 8
1-5批覆技術-無電鍍法 9
1-6催化劑-無電鍍鎳多壁奈米碳管 10
二、研究背景與目的 13
三、實驗步驟與方法 14
3-1 Mg-23.5wt.%Ni共晶合金製備流程 15
3- 2球磨法製備合金 16
3-3 微結構分析 17
3-3-1 X光粉末繞射分析 17
3-3-2光學顯微鏡金相觀察與能量散佈光譜儀分析 17
3-3-3高解析掃描穿透式電子顯微鏡 17
3-4合金儲放氫性質測試 18
3-5熱式差掃描卡量計分析 18
四、結果與討論 18
4-1合金微結構分析 18
4-2無電鍍鎳多壁奈米碳管之結構分析 20
4-3 MN23.5合金添加無電鍍鎳多壁奈米碳管之結構分析 22
4-4吸放氫動態曲線 22
4-5 PCI曲線測試 26
4-6 DSC曲線分析 29
五、結論 31
六、參考文獻 32

參考文獻

[1] Carl-Jochen Winter ,“Hydrogen energy Abundant, efficient, clean: A debate over the energy-system-of-change”, international journal of hydrogen energy ,Vol.34,S1-S52. (2009)
[2] S. Shivkumar, C. Keller and D. Apelian , “The Influence of Molten
Metal Processing on Mechanical Properties of Cast Al-Si-Mg Alloys”, AFS Transactions, Vol.98, pp. 905-911.( 1990)
[3] U. Eberle ,”Hydrogen storage in metal-hydrogen systems and their derivatives”, Journal of Power Sources, Vol.154 , pp.456-460. (2006)
[4] C. Sealy,” The problem with platinum”, Materials Today, Vol.11,pp. 65-68. (2009)
[5] J. A. Ritter, A. D. Ebner , J. Wang, R. Zidan ,” Implementing a hydrogen economy”, Materials Today, Vol.6, p. 18. (2003)
[6] K. L. Lim, H. Kazemian, Z. Yaakob , W. Daud , “Solid-state materials and methods for hydrogen storage: a vritical review”, Chem. Eng. Technol., vol.33, p. 213. (2010)
[7] “Basic research needs for the hydrogen economy- report of the basic 　　energy sciences workshop on hydrogen production, storage, and use”, Argonne National Laboratory, U.S. Department of Energy, Second edition, February 2004, available at : http://www.sc.doe.gov/bes/hydrogen.pdf.
[8] J. Huot, Chapter 16 - kinetics and thermodynamics, “Hydrogen Technology”, Springer-Verlag Berlin Heidelberg,pp.472-499. (2008)
[9] G. E. Froudakis ,” Hydrogen interaction with carbon nanotubes : a review of ab initio studies”, J. Phys., Condens. Matter. , Vol.14, R453. (2002)
[10] G. Sandrock, “A panoramic overview of hydrogen storage alloys from a gas reaction point of view”, Journal of Alloys and Compounds ,Vol.293-295,pp.877-888. (1999)
[11] Schlapbach L, Zuttel A. , ”Hydrogen-storage materials for mobile applications.”, Nature ,Vol.414, pp. 353-358. (2001)
[12]A. Zuttel, “Materials for Hydrogen Storage”, Materials Today, Vol. 6,pp. 24-33.(2003)
[13] A. Zaluska , L. Zaluski, J.O. Strom–Olsen, “Nanocrystalline magnesium for hydrogen storage”, Journal of Alloys and Compounds, Vol.288, pp.217-225. (1999)
[14] Hoffman KC, Reilly JJ, Salzano FJ, Waide CH, Wiswall RH, Winsche WE. “Metal hydride storage for mobile and stationary applications. “, Int. , J. , Hydrogen Energ. , Vol. 1, pp.133-151. (1976)
[15] Shang CX, Bououdina M, Song Y, Guo ZX. “Mechanical alloying
and electronic simulations of (MgH2+M) systems (M = Al、Ti、
Fe、Ni、Cu and Nb) for hydrogen storage.”, Int. J. Hydrogen Energ
,Vol.29, pp.73-80. (2004)
[16] Xiaofeng Liu1,Yunfeng Zhu, Liquan Li,”Hydriding characteristics of Mg2Ni prepared by mechanical milling of theproduct of hydriding combustion synthesis”, International Journal of Hydrogen Energy, Vol. 32, pp.2450-2454. (2007)
[17] A.A. Nayeb-Hashemi , “Alloy Phase Diagrams”,Vol.6, p.238.(1985)
[18] J.J. Reilly,“The Reaction of Hydrogen with Alloys ofMagnesium and Nickel and the Formation of Mg2NiH4”, Inorganic Chemistry,Vol. 7, pp.2254-2256. (1968)
[19]Chang Dong Yim , ”Hydriding properties of Mg–xNi alloys with different microstructures”, Catalysis Today,Vol.120, pp.276-280. (2007)
[20] G. Liang, S. Boily, J. Huot, A. Van Neste, R. Schulz, J. Alloys Comp.,Vol.268,p. 302. (1998)
[21] E. Ma, J. Pagán, G. Cranford, M. Atzmon,” Evidence for self-sustained MoSi2 formation during room-temperature high-energy ball milling of elemental powders”, Journal of Materials Research，Vol.8, pp.1836-1844.(1993)
[22]C.Suryanarayana, ”Mechanical Alloying and Milling”, Prog. Master Sci.,Vol.46 ,p.1 .(2001)
[23] SungNam Kwona, SungHwan Baeka, Daniel R. Mummb, Seong-Hyeon Hongc, MyoungYoup Songd,” Enhancement of the hydrogen storage characteristics of Mg by reactive mechanical grinding with Ni, Fe and Ti”, International Journal of Hydrogen Energy , Vol.33,pp.4586-4529. (2008)
[24] S. Iijima, “Helical microtubules of graphitic carbon”, Nature, Vol. 354, No. 6348, pp. 56-58.(1991)
[25] Sima Aminorroaya, Hua Kun Liu, Younghee Cho, Arne Dahle, “Microstructure and activation characteristics of Mg-Ni alloy modified by multi-walled carbon nanotubes”, International Journal of Hydrogen Energy,Vol. 35,pp.4144-4153. (2010)
[26] X. Yao, C. Wu, A. Du, J. Zou, Z. Zhu, P. Wang, H. Cheng, S. Smith, G. Lu, J. Am.,” Metallic and Carbon Nanotube-Catalyzed Coupling of Hydrogenation in Magnesium”, Chem. Soc., Vol.129, pp.15650-15654.(2007)
[27] G. Liang, R.J. Schulz, Mater. Sci., Vol. 38, p.1179.(2003)
[28] J.J. Reilly, R.H. Wiswall, “Higher hydrides of vanadium and niobium”, Inorg. Chem. , Vol.9 p.1678.(1970)
[29] I. Takagi, T. Sugihara, T. Sasaki, K. Moritani, H. Moriyama. “Potential energy diagram for hydrogen near vanadium surface”, J. Alloys Compd.,Vol.329-333, p. 434.(2004)
[30] X. Yao, C.Z. Wu, H. Wang, H.M. Cheng, G.Q. Lu. J.” Effects of carbon nanotubes and metal catalysts on hydrogen storage in Mg-based nanocomposites” , J. Nanoscience and nanotechnology ,Vol.6,pp. 494-498.(2006)
[31] Z.G. Huang, Z.P. Guo, A. Calka, D. Wexler, H.K. Liu, “Improvement in hydrogen cycling properties of magnesium through added graphite “, Materials Letters,Vol.61, p.3163. (2007)
[32]R. Zacharia、K. Y. Kim、A. K. M. F. Kibria、K. S. Nahm，“Enhancement of hydrogen storage capacity of carbon nanotubes via spill-over from vanadium and palladium nanoparticles”，Chem. Phys. Lett.，Vol.412，p. 369. (2005)
[33] H. W. Zhu、A. Chen、Z. Q. Mao、C. L. Xu、X. Xiao、B. Q. Wei、J. Liang, D. H. Wu，”The effect of surface treatments on hydrogen storage of carbon nanotubes”，Mater. Sci.Lett.，Vol.19，p.1237. (2000)
[34]F. Liu、X. Zhang、J. Cheng、 J. Tu、F. Kong、 W. Huang 、C. Chen，“Preparation of short carbon nanotubes by mechanical ball milling and their hydrogen adsorption behavior”,Carbon ，Vol.41，p.2527. (2003)
[35] C. Bittencourt, A. Felten, J. Ghijsen, J. J. Pireaux, W. Drube, R. Erni, “Decorating carbon nanotubes with nickel nanoparticles”, Chem. Phys. Lett.,Vol.436,p. 368.(2007)
[36] S. Arai, M. Endo, N. Kaneko, “Ni-deposited multi-walled carbon nanotubes by electrodeposition”, Carbon, Vol.42, p. 641. (2004)
[37] A. D. Lueking, R. T. Yang, “Hydrogen spillover to enhance hydrogen storage -study of the effect of carbon physicochemical properties”, Appl. Cat. A, Vol.265, p. 259.(2004)
[38] G. E. Froudakis, “Hydrogen interaction with carbon nanotubes : a review of ab initiostudies”, J. Phys., Condens. Matter., Vol.14, R453.(2002)
[39] J. Li, T. Furuta, H. Goto, T. Ohashi, Y. Fujiwara, S. Yip, “Theoretical evaluation of hydrogen storage capacity in pure carbon nanostructures”, J. Chem. Phys., Vol.119, p.2376.(2003)
[40]G. O.Mallory, J. B. Hajdu, “Electroless plating: Fundamentals and
Applications.”, American Electroplaters and Surface Finishers Society. (1990)
[41] G. O. Mallory and J. B. Hajdu, “Electroless Plating : Fundamentals and Applications”, AESF, Orlando, Florida, Chap.1, USA,. (1990)
[42] H. H. Hsu、K. H. Lin、S. J. Lin and J. –W. Yeh ，” Electroless Copper Deposition for Ultralarge-Scale Integration” ，J. Electrochem. Soc.， Vol.148，C47-C53. (2001)
[43] V. M. Dubin，“Electroless Ni-P Deposition on Silicon with Pd Activation”， J. Electrochem. Soc. ，Vol. 139，pp. 1289-1294. (1992)
[44] R. L. Jackson，“Pd+2/Poly(acrylic acid) Thin Films as Catalysts for Electroless Copper Deposition: Mechanism of Catalyst Formation”，Vol.137，pp.95-101. (1990)
[45] C. M. Liu、W. L. Liu、S. H. Hsieh、T. K. Tsai and W. J. Chen， “Interfacial Reactions of Electroless Nickel Thin Films on Silicon”， Appl. Surf. Sci.，Vol.243，pp. 259-264. (2005)
[46] H. J. Zhang、X. W. Wu, and Q. L. Jia，“Preparation and Microwave Properties of Ni-SiC Ultrafine Powder by Electroless Plating”，Mater. Des.，Vol.28，pp.1369-1373. (2007)
[47] Kuan-Yu Lin、Wen-Ta Tsai、Tsong-Jen Yang，” Effect of Ni nanoparticle distribution on hydrogen uptake in carbon nanotubes ” Journal of Power Sources (2010) in press.
[48] Qingrong Zheng、Anzhong Gu、Xuesheng Lu、 Wensheng Lin，” Temperature-dependent state of hydrogen molecules within the
nanopore of multi-walled carbon nanotubes”， International Journal of Hydrogen Energy，Vol.29，pp. 481-489.(2004)
[49] A. Zolfaghari、P. Pourhossein、H.Z. Jooya，” The effect of temperature and topological defects on H2 adsorption on carbon nanotubes”，International Journal of Hydrogen Energy (2010)in press
[50] Bhatia SK、Myers AL. ，”Optimum conditions for adsorptive
Storage”， Langmuir，Vol.22，pp.1688-700. (2006)
[51] G. Liang，” Mechanical alloying and hydrogen absorption properties of the Mg–Ni system”，Journal of Alloys and Compounds，Vol. 267，pp. 302- 306. (1998)
[52] Nam Hoon Goo、Jung Hoon Woo、Kyung Sub Lee，”Mechanism of rapid degradation of nanostructured Mg2Ni hydrogen storage alloy electrode synthesized by mechanical alloying and the effect of mechanically coating with nickel”，Journal of Alloys and Compounds ，Vol.288，pp.286–293. (1999)
[53] Liquan Li、Tomohiro Akiyama、Jun-ichiro Yagi，” Reaction mechanism of hydriding combustion synthesis of Mg2NiH4”， Intermetallics ，Vol.7，pp. 671-677. (1999)
[54] Liquan Li、Tomohiro Akiyama、Jun-ichiro Yagi，”Activation behaviors of Mg2NiH4 at different hydrogen pressures in hydriding combustion synthesis”，International Journal of Hydrogen Energy ，Vol.26，pp.1035–1040. (2001)

指導教授

李勝隆(Sheng-Long Lee)

審核日期

2011-7-27

推文