摘要(英) |
This paper presents a non-invasive, non-contact system for the measurement of the human body vibration waveforms of the pulse in the left wrist. This measurement system includes a red light laser, a complementary metal-oxide semiconductor (CMOS) image sensor, a step motor and a personal computer. The light source use red light laser and designed on the step motor, the red light laser projected onto the vibration of the wrist. The laser is moved by a driving stepping motor to shift the projected laser line so that it can scan the surface of tested wrist and use CMOS image sensor to record the process and save as film. Finally, Measurement results show the three-dimensional pulse vibration film and the frequency and amplitude at the position of three acupuncture points on the wrist: Chun, Guan, Chy.
Laser triangulation measurement and the optical centroid method are applied and the Fast Fourier Transform (FFT) method used to get the measurement results. The resolution of CMOS image sensor is 640*480 pixel sizes and per second 30 frame. The results are then processed by the fast Fourier transform (FFT) method to determine changes in the vibration frequency by appropriately changing the frequency domain. The device can automatically define the positions of the three vibrating pulses positions (Chun, Guan, Chy).
|
參考文獻 |
〔1〕 林增耀,「尺寸量測儀器的校正與其修正要點」,量測資訊,第八期。
〔2〕 孫文信,羅美俐,「一項基於三角測距原理的距離量測系統設計」,光電資訊,第12期,民國80年12月。
〔3〕 吳季樺,「光學質心法應用於光電量測系統之研究」,國立中央大學,博士論文,民國94年。
〔4〕 Jih-Huah Wu, Rong-Seng Chang, and Joe-Air Jiang, "A Novel Pulse Measurement System by Using Laser Triangulation and a CMOS Image Sensor," Sensors, Vol. 7, pp. 3366-3385, Dec., 2007.
〔5〕 陳俊吉,「利用三角測量法量測人體脈搏」,國立中央大學,碩士論文,民國94年。
〔6〕 高典佑,「三角量測法應用在人體脈搏量測」,國立中央大學,碩士論文,民國95年。
〔7〕 Kai-Sheng Chen, Jih-Huah Wu, Hsin-Yang Chen, Tien-Yu Kao, Rong-Sheng Chang, "Application of Pulse Measurement System based on Laser Triangulation method in Traditional Chinese Medicine Diagnosis," International Conference on Optics and Photonics in Taiwan 2005 (OPT’05), Taiwan , 2005.
〔8〕 陳楷升,「3-D Moiré表面監測系統於中醫把脈的應用」,國立中央大學,碩士論文,民國95年。
〔9〕 郭又榮,「新光學三角量測系統與應用」,國立中央大學,碩士論文,民國97年。
〔10〕 鄧亦書,「線型光學式三角測量系統與應用」,國立中央大學,碩士論文,民國98年。
〔11〕 王唯工,「氣的樂章」,第二章,大塊文化出版,民國2002。
〔12〕 林建忠,「雷射測距與研究實況」,OPTOLINK,民國88年1月。
〔13〕 T. C. Strand, "Optical three-dimensional sensing for machine vision," Opt. Eng., Vol. 24(1), pp. 33-40, 1985.
〔14〕 F. Bien, et. al., "Absolute distance measurement by variable wavelength interferometry," Appl. Opt., Vol. 20(3), pp. 400-403, 1981.
〔15〕 C. C. Williams and H. K. Wickramasinghe, "Optical ranging by wavelength multiplexed interferometry," J. Appl. Phy., Vol. 60(6), pp. 1900-1903, 1986.
〔16〕 T. Bosch and M. Lescure, Eds., "Selected Papers on Laser Distance Measurement," SPIE Milestone Series, Vol. MS 115, SPIE Optical Engineering Press, Bellingham, WA~1995!.
〔17〕 Markus-Christian Amann, Thierry Bosch, Marc Lescure and Risto Myllyla and Marc Rioux, "Laser ranging: a critical review of usual techniques for distance measurement," Opt. Eng., Vol. 40, pp. 10-19, 2001.
〔18〕 B. Joumet, G. Bazin, "A low-cost laser range tinder based on and FMCW-like method," IEEE Trans. IM, Vol. 49, No.4, August 2000.
〔19〕 P. U. Unschuld, Huang Di Nei Jing Su Wen:UNIVERSITY OF CALIFORNIA PRESS, 2003.
〔20〕 陳連春,「步進馬達原理與活用要訣」,建興出版社,台北市,89年。
〔21〕 蔡明財,「步進馬達活用技術」,全華出版社,台北市,86年。
〔22〕 陳銘昌,「複合型步進馬達參數分析之研究」,元智大學電機工程研究所,碩士論文,91年。
〔23〕 曹國昌,「FPGA為基礎之微步進馬達模糊電流控制器設計」,長庚大學電機工程研究所,碩士論文,91年。
〔24〕 李仲文譯,「微步進技術的新面貌」,機械月刊,第十九卷,第十一期,1989。
〔25〕 Walter Koechner and Michael Bass, Solid-State Lasers, Springer, 2002.
〔26〕 郁道銀,淡恆英,工程光學,2002。
〔27〕 張守進,劉醇星,姬梁文,半導體雷射,2002。
〔28〕 HEALTH CARE NEWS, 2003.
〔29〕 J. C. e. al, "The impact of comorbid disease and injuries on resource use and expenditures in parkinsonism," NEUROLOGY, Vol. 60, pp. 87-93, 2003.
|