參考文獻 |
[1] D. Knight, “Davy, Sir Humphry, baronet (1778–1829),” in Oxford Dictionary of
National Biography (Oxford University Press, 2004).
[2] M. Josephson, Edison: a biography (McGraw-Hill, New York, 1959).
[3] J. Kaufman, IES Lighting Handbook 1981 Reference Volume (Illuminating Engineering
Society of North America, New York, 1981).
[4] R. Kane and H. Sell, Revolution in lamps: a chronicle of 50 years of progress, 2nd ed.
(The Fairmont Press, 2001).
[5] Wikipedia website, http://en.wikipedia.org/wiki/T5_fluorescent_lamp.
[6] Panasonic Corporation, http://panasonic.jp/light/.
[7] Wikipedia website, http://en.wikipedia.org/wiki/High-intensity_discharge_lamp.
[8] OSRAM, http://www.osram.com/.
[9] 孫慶成,2009 LED 固態照明研討會,國立中央大學,中華民國九十八年。
[10] M. G. Craford, “LEDs for Solid State Lighting and Other Emerging Applications: Status,
Trends, and Challenges,” Proc. SPIE 5941, 1-10 (2005).
[11] H. J. Round, “A note on carborundum,” Electrical World 19, 309-310 (1907).
[12] G. Destriau, “Scintillations of zinc sulfides with alpha-rays,” J. Chimie Physique 33, 587
(1936).
[13] N. Holonyak, Jr. and S. F. Bevaqua, “Coherent(visible) Light Emission From
Ga(As1–xPx) Junctions,” Appl. Phys. Lett. 1, 82-83 (1962).
[14] N. Holonyak, Jr., “Active region in visible-light diode laser,” Electronics 36, 35 (1963).
[15] C. J. Nuese, J. J. Tietjen, J. J. Gannon, and H. F. Gossenberger, “Optimization of
electroluminescent efficiencies for vapor-grown GaAsP diodes,” J. Electrochem. Soc. :
Solid State Sci. 116, 248 (1969).
[16] H. Amano, M. Kito, K. Hiramatsu and I. Akasaki, “P-Type Conduction in Mg-Doped
GaN Treated with Low-Energy Electron Beam Irradiation (LEEBI),” Jpn. J. Appl. Phys.
28, 2112-2114 (1989).
[17] S. Nakamura, M. Senoh, and T. Mukai, “P-GaN/n-InGaN/n-GaN double-heterostructure
blue-light-emitting diodes,” Jpn. J. Appl. Phys. 32, 8 (1993).
[18] S. Nakamura, M. Senoh, N. Iwasa, and S. Nagahama, “High-brightness InGaN blue,
green, and yellow light-emitting diodes with quantum well structures,” Jpn. J. Appl.
Phys. 34, 797 (1995).
[19] E. F. Schubert, Light-Emitting Diodes (Cambridge University Press, 2006).
[20] Commission Internationale de l’Éclairage, “CIE 1988 2° spectral luminous efficiency
functions of photopic vision,” CIE Publication No. 86 (1988).
[21] 大田登,色彩工程學 理論與應用,第二版,全華圖書出版社,中華民國九十六年。
[22] V. N. Mahajan, Optical Imaging and Aberrations: Part I Ray Geometrical Optics (SPIE
64
PRESS, Washington, 1998).
[23] C. C. Sun, T. X. Lee, S. H. Ma, Y. L. Lee, and S. M. Huang, “Precise optical modeling
for LED lighting verified by cross correlation in the midfield region,” Opt. Lett. 31,
2193-2195 (2006).
[24] J. W. Goodman, Introduction to Fourier Optics, 3rd ed. (Roberts & Company, 2005)
[25] American National Standards Institute and IES, American National Standard Practice
for Roadway Lighting ANSI/IES RP-8-1983 (Illuminating Engineering Society of North
America, New York, 1983).
[26] J. Block, The IESNA Lighting Handbook Ninth Edition (Illuminating Engineering
Society of North America, New York, 1999).
[27] 交通技術標準規範公路類公路工程部,交通工程手冊,第七章,中華民國九十八年。
[28] 內政部,市區道路及附屬工程設計規範,第十九章,中華民國九十八年。
[29] 中華人民共和國建設部,城市道路設計標準,CJJ 45-2006 (2006)。
[30] W. T. Chien, C. C. Sun, and I. Moreno, “Precise optical model of multi-chip white
LEDs,” Opt. Express 15, 7572-7577 (2007).
[31] Breault Research Organization, http://www.breault.com/.
[32] 黃志銘,大面積發光二極體二維發光分佈之模擬與量測,中央大學光電所碩士論
文,中華民國九十二年。
[33] Rhinoceros, http://tw.rhino3d.com/.
[34] 黃冠騰,以LED 發光二極體為光源之路燈光學設計,元智大學光電工程學系碩士
論文,中華民國九十九年。
[35] J. Bortz, N. Shatz, and D. Pitou, “Optimal design of a nonimaging projection lens for use
with an LED source and a rectangular target,” Proc. SPIE 4092, 130-138 (2000).
[36] Y. Ding, X. Liu, Z. R. Zheng, and P. F. Gu, “Freeform LED lens for uniform
illumination,” Opt. Express 16, 12958–12966 (2008).
[37] Y. Luo, Z. Feng, Y. Han, and H. Li, “Design of compact and smooth free-form optical
system with uniform illuminance for LED source,” Opt. Express 18, 9055–9063 (2010).
[38] Y. C. Lo, K. T. Huang, X. H. Lee, and C. C. Sun, “Optical design of a Butterfly lens for a
street light based on a double-cluster LED,” Microelectronics Reliability (2011).
|