全通網路相位偏移器之設計與製作

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：36

、訪客IP：18.119.127.13

姓名

陳偉志(Wei-Chih Chen) 查詢紙本館藏

畢業系所

電機工程學系

論文名稱

全通網路相位偏移器之設計與製作
(Design and Fabrication of Phase Shifters Based on All-Pass Networks)

相關論文

★ 分佈式類比相位偏移器之設計與製作	★ 以可變電容與開關為基礎之可調式匹配網路應用於功率放大器效率之提升
★ 使用可調式負載及面積縮放技巧提升功率放大器之效率	★ 應用於無線個人區域網路系統之低雜訊放大器設計與實現
★ 應用於極座標發射機之高效率波包放大器與功率放大器	★ 數位家庭無線資料傳輸系統之壓控振盪器設計與實現
★ 鐵電可變電容之設計與製作	★ 用於功率放大器效率提升之鐵電基可調式匹配網路
★ 基於全通網路之類比式及數位式相位偏移器	★ 使用鐵電可變電容及PIN二極體之頻率可調天線
★ 具鐵電可變電容之積體被動元件製程及其應用於微波相位偏移器之製作	★ 使用磁耦合全通網路之寬頻四位元 CMOS相位偏移器
★ 具矽基板貫孔之鐵電可變電容的製作與量測	★ 矽基板貫孔的製作和量測
★ 使用鐵電可變電容之頻率可調微帶貼片天線	★ 具矽基板貫孔之鐵電可變電容及矽化鉻薄膜電阻的製作與量測

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

本論文使用全通網路架構作為基礎來實現數位式與類比式相位偏移器。在第二章中，我們推導出數位式全通網路相位偏移器的設計公式，並成功地使用穩懋0.15-μm砷化鎵假性高速電子移動場效電晶體製程實現一5.8 GHz 90°相位偏移器晶片。其在設計頻率5.8 GHz 下的量測結果顯示，當電晶體在開與關的狀態下（電晶體閘極偏壓分別為0 V 與−2 V），其插入損耗分別小於1.9 dB 與0.8 dB，而輸入與輸出返回損耗則大於15 dB，相位偏移量可達88°，與設計目標90°相當接近。
第三章中我們分析了類比式全通網路相位偏移器，並推導出其設計公式。而為了實現類比式的相位偏移器，我們發展了鐵電可變電容製程。鐵電可變電容中的鐵電薄膜是使用脈衝雷射沉積技術來製作。製作出的可變電容在4 V 偏壓下可達到2:1 的可調度，其於1.8 GHz 時的品質因子大於40。

摘要(英)

In this thesis, digital and analog phase shifters are designed based on all-pass networks.
In Chapter 2, the design equations for digital all-pass phase shifters are derived. Based on the equations, we successfully implement a 5.8-GHz 90°digital phase shifter chip using WIN 0.15-μm GaAs pHEMT process. The measurement results at 5.8 GHz show that, when the switch is switched to ON and OFF-states (gate terminals of the transistors are biased at 0 V and −2 V, respectively), the insertion loss of the circuit is less than 1.9 dB and 0.8 dB, respectively, and both the input and output return losses are greater 15 dB. The measured phase shift is 88°, which is close to the target phase shift of 90°.
In Chapter 3, we analyze analog phase shifters based on all-pass networks, and derive the design equations. In order to implement the analog phase shifter, we develop
ferroelectric variable capacitor (varactor) process. The ferroelectric thin films used in the varactors are fabricated using pulsed laser deposition (PLD) technique. The fabricated ferroelectric varactors can achieve a 2:1 tunability under a bias voltage of 4 V, and possess a
quality factor greater 40 at 1.8 GHz.

關鍵字(中)

★ 可變電容
★ 鐵電材料
★ 相位偏移器
★ 全通網路

關鍵字(英)

★ Varactor
★ Ferroelectric
★ Phase Shifter
★ All-Pass Network

論文目次

目錄
摘要 ........................................................................................................................................... i
Abstract ...................................................................................................................................... ii
誌謝 .......................................................................................................................................... iv
目錄 ......................................................................................................................................... vii
圖目錄 ....................................................................................................................................... x
表目錄 .................................................................................................................................... xiii
第一章緒論 .............................................................................................................................. 1
1-1 研究動機 ................................................................................................................... 1
1-2 文獻回顧 ................................................................................................................... 3
1-2-1 向量調節式 ................................................................................................... 4
1-2-2 負載反射式相位偏移器 ............................................................................... 5
1-2-3 分佈式相位偏移器 ....................................................................................... 5
1-2-4 切換式相位偏移器 ....................................................................................... 6
1–3 全通網路 .................................................................................................................. 8
1-4 章節介紹 ................................................................................................................. 11
第二章全通網路之數位式相位偏移器設計 ........................................................................ 12
2–1 全通網路數位式相位偏移器設計 ........................................................................ 12
viii
2–2 5.8 GHz 數位式全通網路90°相位偏移器晶片設計 ........................................... 15
2–3 模擬與量測結果比較及偵錯 ................................................................................ 18
2–4 結果與討論 .............................................................................................................. 24
第三章全通網路之類比式相位偏移器設計與鐵電可變電容製作 .................................... 25
3–1 全通網路之類比式相位偏移器 ............................................................................ 25
3–2 1.8 GHz 全通網路類比式相位偏移器設計與模擬 .............................................. 28
3–3 可變電容技術 ........................................................................................................ 31
3–4 鐵電材料與溫度關係 .............................................................................................. 33
3–5 鐵電可變電容 .......................................................................................................... 35
3–5–1 鐵電可變電容製作 ...................................................................................... 35
3–5–2 鐵電薄膜成長條件 .................................................................................... 38
3–6 鐵電可變電容特性 .................................................................................................. 41
3–7 結論與討論 .............................................................................................................. 47
第四章結論 ............................................................................................................................ 48
參考文獻 ................................................................................................................................. 49
附錄A ..................................................................................................................................... 52
雙埠對稱網路奇偶模對稱分析 ...................................................................................... 52
附錄B ..................................................................................................................................... 53
B.1 Bottom electrode evaporation and liftoff. .................................................................. 53
ix
B.2 Ferroelectric thin film deposition by PLD. ................................................................ 53
B.3 Top electrode evaporation and liftoff. ........................................................................ 54
B.4 Ferroelectric thin film wet etch. ................................................................................. 54

參考文獻

[1] F. Ellinger, U. Mayer, M. Wickert, N. Joram, J. Wagner, R. Eickhoff, I. Santamaria, C.
Scheytt and R. Kraemer, “Integrated adjustable phase shifters,” IEEE Micrwave Magazine, vol. 11, no. 97, pp. 97–108, Oct. 2010.
[2] F. Ellinger, U. Jörges, U. Mayer, and R. Eickhoff, “Analysis and compensation of phase variations versus gain in amplifiers verified by SiGe HBT cascode RFIC,” IEEE Trans. Microwave Theory Tech., vol. 57, no. 8, pp. 1885–1894, Aug. 2009.
[3] U. Mayer, F. Ellinger, and R. Eickhoff, “Analysis and reduction of phase variations of variable gain amplifiers verified by CMOS implementation at C-Band,” IET J. Circuits, Devices Syst., vol. 4, pp. 433–439, Sep. 2010.
[4] F. Ellinger, Radio Frequency Integrated Circuits and Technologies, 2nd ed. Heidelberg, Germany: Springer-Verlag, 2008.
[5] F. Ellinger, R. Vogt, and W. Bachtold, “Compact reflective type phase shifter MMIC for C-band using a lumped element coupler,” IEEE Trans. Microwave Theory Tech., vol. 49, no. 5, pp. 913–917, May 2001.
[6] D. Kim, Y. Choi, M. G. Allen, J. S. Kenney, and David Kiesling, “A Wide-Band reflection-type phase shifter at S-Band using BST coated substrate,” IEEE Trans. Microwave Theory Tech., vol. 50, no. 12, pp. 2903–2909, Dec. 2002.
[7] J. S. Hayden and G. M. Rebeiz, “Very low-loss distributed X-Band and Ka-Band MEMS phase shifters using Metal–Air–Metal capacitors,” IEEE Trans. Microwave
Theory Tech., vol. 51, no. 1, pp. 309–314, Jan. 2003.
[8] A. S. Nagra and R. A. York, “Distributed analog phase shifters with low insertion loss, ” IEEE Trans. Microwave Theory Tech., vol. 47, no. 9, pp. 1705–1711, Sep. 1999.
[9] J. S. Hayden and G. M. Rebeiz, “2-bit MEMS distributed X-band phase shifters,” IEEE Micro. Wireless Compon. Lett., vol. 10, no. 12, pp. 540–542, Nov. 2000.
[10] D. Adler and R.Popovich, “Broadband switch-bit phase shifter using all-pass networks,” IEEE MTT-S Int. Microwave Symposium, vol. 1, pp. 265–268, Apr. 1991.
[11] C. F Campbell and S. A. Brown, “A compact 5-bit phase shifter MMIC For K- band satellite communication systems,” IEEE Trans. Microwave Theory Tech., vol. 48, no.
12, pp. 2652–2656, Dec. 2000.
[12] M. Hangai, M. Hieda, N. Yunoue, Y. Sasaki, and M. Miyazaki, “S- and C-Band ultra-compact phase shifters based on all-pass network,” IEEE Trans. Microwave Theory Tech., vol. 58, no. 1, pp. 41–47, Jan. 2010.
[13] D. W. Kang1, H. Lee, K. H. Lee, S. I. Jeon, and S. Hong1, “Design of a phase shifter with improved bandwidth using embedded series-shunt switches,” Microwave Conference, 2005 European, vol. 2, Oct. 2005.
[14] L.-Y. V. Chen, R. Forsel, A. H. Cardona, T. C. Watson, and R. York, “Compact analog phase shifters using thin-film (Ba,Sr)TiO3 varactors,” IEEE MTT-S Int. Microwave Symposium, pp. 667–670, Jun. 2007.
[15] J. -S. Kenney, Y. K. Yoon, M. Ahn, and M. G. Allen, “Low-voltage ferroelectric phase shifters from L- to C-Band and their applications,” IEEE Aerospace Conference, Jun. 2006.
[16] D. M. Pozar, Microwave Engineering, 3rd ed. New York: John Willy & Sons, 2003.
[17] R. Tayrani, M. A. Teshiba, G. M. Sakamoto, Q. Chaudhry, R. Alidio, Y. Kang, I. S. AHmad, T. C. Cisco, and M. Hanuhe, “Broad-band SiGe MMICs for phased-array
radar application,” IEEE Journal of Solid-State Circuits., vol. 38, no. 9, pp. 1462–1470, Sep. 2003.
[18] J.-S. Fu, “Adaptive impedance matching circuits based on ferroelectric and semiconductor varactors,” Ph.D. dissertation, The University of Michigan, 2009.
[19] D. Kim, Y. Choi, M. Ahn, M. G. Allen, J. S. Kenney, and P. Marry, ”2.4 GHz continuously variable ferroelectric phase shifter,” IEEE Micro. Wireless Compon. Lett., vol. 13, no. 10, pp. 434–436, Oct. 2003.
[20] J.-S. Fu, X. A. Zhu, J. D. Phillips, and A. Mortazawi, ” A ferroelectric-based impedance tuner for adaptive matching applications,” IEEE MTT-S Int. Microwave
Symposium, pp. 955–958, Jun. 2008
[21] Z. Zhao, X. Wang, K. Choi, C. Lugo, and A. T. Hunt, ”Ferroelectric phase shifters at 20 and 30 GHz,” IEEE Trans. Microwave Theory Tech., vol. 55, no 2, pp.430–437, Feb. 2007.
[22] S. Gevorgian, Ferroelectrics in Microwave Devices, Circuits and Systems, 1st ed. London: Springer-Verlag, 2009.
[23] S. Yamamichi, A. Yamamichi, D. Park, T.-J. King, and C. Hu, “Impact of time dependent dielectric breakdown and stress-induced leakage current on the Reliability of high dielectric constant (Ba,Sr)TiO3 thin-film capacitors for Gbit-scale DRAM’s,” IEEE Trans. Electron Device, vol. 46, no. 2, pp. 342–347, Feb. 1999.
[24] K. Abe and S. Komatsu, “Ferroelectric properties in epitaxially grown BaxSr1-xTiO3 thin films,” J. Appl. Phys., vol. 77, pp. 6461–6465, 1995.
[25] X. Zhu, “Switchable and tunable ferroelectric thin film radio frequency components,” Ph.D. dissertation, The University of Michigan, 2009.
[26] M. Steer, W. D. Palmer, Multifunctional Adaptive Microwave Circuits System.: SciTech Publishing, 2008.
[27] N. K. Pervez, “Investigation of loss mechanisms in thin film barium strontium titanate capacitors,” Ph.D. dissertation, The University of California Santa Barbara, 2006.

指導教授

傅家相(Jia-Shiang Fu)

審核日期

2011-10-5

推文