| 摘要(英) |
Facing end customer rapidly demand change and globalization influence, the key factor to corporate success is to deliver new product which meets market needs, effective design and high quality standard in shortest development cycle. Therefore, it is quite important to consolidate corporate resources and gather all function teams to study and finalize design concept during early development stage.
The research is taking Q company’s server as example, apply FMEA on server products’ key components, two major characteristics which are product performance and reliability enhancement as measure standard, through product development team to systematically analyze failures and root cause it. Evaluate its severity, occurrence and detection, then calculate RPN, sort out priority list and solutions according to RPN value, re-calculate RPN and solution applied to it. A successful FMEA can help engineer discover potential risk and its impact in early design stage and look for solution to avoid impact once failure occurs.
The research could enable engineers gain knowledge of product and process control ability, improve quality of product design, in the meantime, it will reduce the recurrence of design changes thereby to reduce design cycle and cost. Corporate could also build database to internal tracking analysis result for future product development team as reference thus to improve product design quality and reliability.
|
| 參考文獻 |
ㄧ.中文文獻
1.中國生產力中心(2006)，《新產品開發設計與可靠度FMEA》，台中:中國生產力中心，1-3。
2.中方科技(2009)，《中方科技教材-FMEA之核心價值及流程管理》，台中:中方科技，22-28。
3.小野寺勝重(2001)，《實踐FMEA手法—提升產品或系統的可靠性、維護性與安全性》，台北:財團法人中衛發展中心。
4.王宗華（2002），《FMEA》，台北：財團法人中衛發展中心出版。
5.白光華(1993)，《創新協同產品研發》。台北:中國生產力中心。
6.司徒達賢(1995)，《策略管理》，台北:遠流出版社。
7.品士公司譯(2001)，《潛在失效模式及效應分析(FMEA)參考手冊》，台北：品士公司。
8.品管學會-可靠度推行委員會(1994)，《可靠度工程實務》，台北: 財團法人中衛發展中心，4-43。
9.陳文魁、劉漢容(2005)，《品質管理-六標準差式(初版) 》，台中：滄海書局。
10.陳金昇(2005) ，《新產品開發於同步工程之應用-以 TFT-LCD PANEL 個案為例》，碩士論文，逢甲大學。
11.陳紹興(1988)，《失效模式及效應分析作業手冊》，台北:經濟部工業局中衛小組，1-66。
12.楊文達(2006)，《應用失效模式效應分析(FMEA)方法於產品設計之品質改善》，碩士論文，明新科技大學，16-32。
13.陳相如、吳貴彬(2002)，”失效模式與效應分析(FMEA)－QS9000之預防分析工具”，品質月刊，38(6)，87-90。
14.華強、李朝金(2009)，”應用 FMEA 於氣動工具產品設計-以衝擊扳手為例”，中華民國設計學會第14屆學術研究成果研討會，朝陽科技大學。
15.彭鴻霖(2007)，”可靠度管理技術”，品質學會可靠度工程講義。
16.趙立隆，2003，“失效模式與效應分析在全面生產管理之初期管理的應用-以台灣愛普生工業公司為例”，碩士論文，朝陽科技大學工業，39-76。
17.賴士葆(1985)，”研究發展/行銷/製造三部門互動與新產品發展績效相關之研究”，中華經濟企業研究所研究叢論，台北:中華經濟研究院。
18.彼得杜拉克(1988)，《創新與創業精神：管理大師談創新實務與策略》，蕭富峰、李田樹譯，台北:麥田出版。
二. 英文文獻
1.Booz, Allen & Hamilton (1982), New product management for 1980’s. New York：Booz, Allen & Hamilton, Inc.
2.Cooper, R. G. & Kleinschrnidt E. J. (1986). “An Investigation into the New Product Process: Steps, Deficiencies and Impact”. Journal of Product Innovation Management, 3(2), 71-85
3.Cooper, R. G. (1984) “The Strategy- Performance Link in Product Innovation”, R&D Management, 247-259.
4.Crawford (1997), “Factors Influencing Success in Integrated Product Development (IPD) Projects”, IEEE Transactions on Engineering Management, 48, 323-347.
5.Daimler Chrysler Corporation，Ford Motor Company，General Motors Corporation (2001)，QS9000 Potential FMEA Reference Manual
6.Ford Motor Company (1988), Potential Failure Mode and Effects Analysis , Instruction Manual.
7.Hauck, W. C., B. P. E. Anil, and A. J. Hauck(1997), “Simultaneous engineering –correlates of success,” International Journal of Production Economics, 83-90 .
8.Hsiao(2002), “Concurrent design method for developing a new product,” International Journal of Industrial Ergonomics , 29, 41-45.
9.McDermott R.E. , Mikulak R.J. & Beauregard M.R. (1996) , The Basics of FMEA , Productivity , USA , 27-44.
10.MIL-STD-1629A (1980) , Military Standard Procedure for Performing a Failure Mode Effects and Criticality Analysis , Department of Defense USA.
11.Shirley Coleman (2004), Failure Mode Identification through Clustering Analysis Quality and Reliability Engineering International , John Wiley & Sons, Ltd.
12.Sampson (1970), Can Consumer Create New Product? Journal of Market Research Society, 12(1), 40-52.
13.Souder(1988), “Measuring New Product Success: The Difference that Time perspective Makes”, Journal of Product Innovation Management, (12), 392-405.
14.Trott, P. (1998), Innovation Management & New Product Development,
London: Pitman Publishing, 111-138.
15.Todinov M. (2005), Reliability and Risk Models, John Wiley & Sons, UK, 145-157.
16.Ulrich K.T. , Eppinger S.D. (2004) , Product Design and Development , McGraw Hill , New York , 22-24 , 337-372.
三. 網站部份
1.Q電腦公司公開資訊(2011)，，(Retrieved May.2011)
2.Q公司首頁(2011)，，(Retrieved May.2011)
3.維基百科(2011)，，(Retrieved May.2)
|
[Endnote RIS 格式]
[相關文章]
[文章引用]
[完整記錄]
[館藏目錄]
facebook
plurk
twitter
funp
google
live
udn
HD
myshare
reddit
netvibes
friend
youpush
delicious
baidu
Google bookmarks
del.icio.us
hemidemi