整合多樣配置組態下的藍芽射頻驗證系統

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：116

、訪客IP：18.221.11.166

姓名

倪向進(Hsiang-chin Ni) 查詢紙本館藏

畢業系所

資訊工程學系在職專班

論文名稱

整合多樣配置組態下的藍芽射頻驗證系統
(An Integrated Multi-configurations System for Bluetooth RF Validation)

相關論文

★ 具檔案敘述相關語查詢之智慧型檔案搜尋系統	★ 具遲到者支援功能之網際網路簡報系統
★ 以快速廣播法建構熱門視訊隨選服務伺服器	★ 具事件同步再現特性之遠程電傳展示伺服器
★ 無線網路環境下之廣播資訊快速下載	★ 中文網站繁簡互訪協助系統
★ 支援時光平移播放之調適性現場直播演算法	★ 用於互動式廣播之段落對齊法
★ 熱門影片廣播法之影片區段復原機制	★ 配合熱門影片廣播的本地伺服器高效快取法
★ 一個增進SIP在防火牆環境中應用的協同模組	★ 考量網頁熱門度之一致性雜湊法解決網頁代理伺服器之負載平衡
★ 以網域名稱伺服器為基礎之色情網站過濾系統	★ 使用熱門廣播法及支援點對點傳輸之影音內容傳遞網路
★ 變動頻寬平滑化之熱門廣播演算法	★ 支援變動播放速率及低暫存空間需求之熱門廣播法研究

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

隨著藍芽無線通訊技術的不斷演進，內建藍芽通訊模組的產品日益增多，加上近年來WLAN無線區域網路盛行，使得ISM 2.4G免授權的頻帶日益壅擠，因此藍芽收發機模組射頻的品質效能顯得特別重要。藍芽射頻標準定義了一些測試環境以及參數規範，如接收/發送訊號輸出、同頻干擾、鄰頻干擾、誤碼率(BER)性能等，來確保藍芽設計測試與品質認證。本論文中，我們提出一個整合的測試應用架構，其中包含核心藍芽測試儀、頻譜分析儀、訊號產生器以及多重路徑線路控制器，透過後端軟體的控制，能夠使得原本多樣性的儀器設定組態，可以在不用更換相關測試環境的連接設定下，達成自動化量測並分析測試結果，並透過藍芽晶片模組來驗證實驗系統，測試並取得在多樣測試組態下的測試結果，分析整個系統的準確度與穩定度。

摘要(英)

With the advance of Bluetooth wireless technology, built-in Bluetooth module products are increasing and Wireless Local Area Network are prevalent in recent years, it occurs the channels increasingly crowded in ISM 2.4G unlicensed band, so the quality or performance of Bluetooth RF transceiver is particularly important to reduce the effect. Bluetooth specifications defined a set of test conditions and parameter for Bluetooth radio standard, such as transmitter/ receiver’s signal output, co-channel interference, adjacent channel interference, Bit Error Rate performance, etc., to ensure the validity of Bluetooth design and quality certification. In this thesis, we propose an integrated test architecture and method which contains the main Bluetooth testers, spectrum analyzers, signal generators, multipath switch controller and software. By this proposed method, we can through the back-end software to control diverse configurations in original test case without replacing any connection settings of equipment in test environment and achieve automatic measurement and analysis of test result. Finally, we utilize one sample module to verify the experimental system and obtained the test results under multi-configurations, then analyze the accuracy and stability of integrated system.

關鍵字(中)

★ 發射器/接收機
★ 多樣設定組態

關鍵字(英)

★ Transmitter/Receiver
★ Multi-configurations

論文目次

摘要.........................................i
Abstract........... .........................ii
目錄........................................iii
圖目錄.......................................v
表目錄......................................vii
第一章緒論...................................1
1-1 研究背景.................................1
1-2 研究動機.................................2
1-3 論文架構.................................3
第二章相關研究...............................4
2-1 藍芽版本演進..............................4
2-2 藍芽基本架構.............................6
2-3 藍芽RF 測試項目..........................11
2-3-1 發射器量測..............................11
2-3-2 接收器量測..............................13
2-4 藍芽與無線區域網路的互相干擾..............15
第三章系統設計...............................17
3-1 系統架構..................................17
3-2 不同架構的連接設定.......................18
3-3 軟體架構流程圖............................23
第四章實驗評估...............................27
4-1 實驗環境.................................27
4-2 實驗初始化...............................28
4-3 實驗項目.................................30
4-3-1 實驗結果...............................30
4-3-2 穩定度分析實驗.........................35
4-3-3 實驗系統相關效益分析...................37
4-3-4 藍芽與無線區域網路干擾分析實驗結果.....38
4-4 實驗結論.................................40
第五章結論與未來工作.........................42
參考文獻......................................43
附錄口試教授建議改進事項.....................45

參考文獻

[1] Bluetooth SIG, “http://www.bluetooth.com”.
[2] Bluetooth SIG, Specification of the Bluetooth System v2.0+ EDR/v2.1 + EDR/3.0 + HS, Core System Package, Volume 2, Part A, 21 April 2009
[3] Kwok Y., Lau V. ,“Bluetooth WPAN”, Wireless Internet and Mobile Computing Interoperability and Performance, Pages: 285 -307, 2007
[4] ROHDE & SCHWARZ, Bluetooth Basics at a Glance Application Note 1MA108
[5] Anritsu MT8852B Bluetooth Test Set Operation Manual and Remote Programming Manual, April 2010.
[6] Agilent Technologies, “Performing Bluetooth RF Measurements Today Application Note 1333”.
[7] R&S FSL Spectrum Analyzer Operating Manual, V12 1300.2519.12-12.
[8] Anritsu CW69167B Synthesized Signal Generator Operation Manual
[9] K. Shuaib, M. Boulmalf, F. Sallabi, A. Lakas, “Performance analysis co-existence of IEEE 802.11g with Bluetooth”, Wireless and Optical Communications Networks, 2005. WOCN 2005. Second IFIP International Conference on, Pages: 40 – 44, 2005
[10] J.I.N. Hipolito, N.C. Arballo, J.A. Michel-Macarty, E.J. Garcia,"Bluetooth Performance Analysi s in Wireless Personal Area Networks", Electronics Robotics and Automotive Mechanics , 2009. CERMA ’’09, Pages: 38 – 43, 2009
[11] G. Betta, D. Capriglione, L. Ferrigno, and G. Miele., “Influence of Wi-Fi computer interfaces on RF measurement systems”, Virtual Environments, Human-Computer Interfaces and Measurement Systems, 2007. VECIMS 2007. IEEE Symposium, Pages: 99 – 104, 2007
[12] N. Golmie, R. E. VanDyck , A. Soltanian, A. Tonnerre, O. Rebala, “Interference Evaluation of Bluetooth and IEEE 802.11b Systems” National Institute of Standards and Technology , Page(s): 931 – 934, 2004.
[13] Wolfgang A., Orlenius C., Kildal P.-S., “Measuring Output Power of Bluetooth Devices in a Reverberation Chamber”, 2003 Antennas and Propagation Society International Symposium, Pages: 735 - 738 vol.4, 2003.

指導教授

曾黎明(Li-ming Tseng)

審核日期

2012-1-16

推文