利用光展量概念之微型投影機光學設計方法與實作

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：17

、訪客IP：18.117.10.195

姓名

吳欣潔(Hsin-chieh Wu) 查詢紙本館藏

畢業系所

光電科學與工程學系

論文名稱

利用光展量概念之微型投影機光學設計方法與實作
(Optical System Design and Development of Pico-Projector Using Etendue Concept)

相關論文

★ 具平坦化側帶之超窄帶波導模態共振濾波器研究	★ 以矽光學平台為基礎之4通道×10-Gbps 光學連結模組之接收端研究
★ 白光LED於住宅照明之設計與應用	★ 透明導電層上之高分子聚合物微奈米光學結構於氮化鎵發光二極體光學特性研究
★ 超廣角車用鏡頭設計	★ 具45度反射面之非共平面轉折波導光路
★ 以矽光學平台為基礎之4通道 x 10 Gbps光學連結模組之發射端	★ 具三維光路之光連接發射端模組
★ 矽基光學平台技術為核心之雙向4通道 x 10-Gbps光學連接收發模組	★ 建立於矽基光學平台之高分子聚合物波導光路
★ 適用於色序式微型投影機之微透鏡陣列積分器光學系統研製	★ 發光二極體色溫控制技術及其於色序式微型投影機之應用
★ 光學變焦之軌跡優化控制	★ LED光源暨LED與太陽光混和照明於室內照明之模擬與分析
★ 具45˚矽基反射面高分子聚合物波導之10-Gbps晶片內部光學連接收發模	★ 在陶瓷基板實現高速穿孔架構之5-Gbps光學連接模組

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

本論文提出一組微型投影機，其架構利用L型光路結合成像以及非成像系統，而光源及光閥使用色序式的操作，光源使用一組RGBG陣列之發光二極體模組，光閥系統為反射式矽基液晶面板，使用上須搭配偏振分光器；非成像系統由準直鏡，微透鏡陣列積分器以及聚光鏡組成；準直鏡為兩片球面鏡片，為減少受光源的熱影響材料使用玻璃，微透鏡陣列積分器使用兩片相同的雙面同曲率塑膠鏡片，由於使用的偏振分光鏡有聚光鏡功能，便不須在非成像系統中製作聚光鏡，成像系統則使用市面上現有的鏡組。
由於越高收光數值孔徑的準直鏡的光學效率越高，因此設計出數值孔徑值為0.985(sin80°)的準直鏡；而做混光以及調製光型用的透鏡陣列積分器則要搭配偏振分光器上的聚光鏡做設計，最後透鏡陣列出光的數值孔徑便訂在0.574(sin35°)，而製程限制下單片透鏡陣列出光的數值孔徑無法滿足目標值，最後將其設計為一組雙片，而調製光型的部分每塊微透鏡大小設計為SVGA的4 : 3比例(1.225 mm× 0.919 mm)。
設計完成之非成像系統含外殼尺寸為13.1 mm× 11 mm× 11 mm，體積1.6 cc，加上成像系統總尺寸為34 mm× 31 mm× 11 mm，體積11.6 cc，而此系統在LED功耗為1 W時可得約4.0 lm/W的效率。

摘要(英)

In this thesis, an architect of pico-projector using L-shape light path that combines an image system and a non-image system is proposed, and the system is operated in Field-Color-Sequential (FCS) way. A RGBG-array LED is applied as a light source in this system. The liquid crystal on silicon (LCoS) is chosen to be the image display, and it would be accompanied with a polarization beam splitter (PBS) in the pico-projector. There are a collimator, an integrator, and a condenser forming the non-image system. The collimator systems are realized using two sphere-shape lenses, and its material is chosen to be glass to avoid the heat damage induced from LED light sources. The integrator is consisted of two pieces of micro-lens arrays (MLAs), and the PBS is also possessed the function of condenser.
The collimator with a numerical aperture (NA) of as high as 0.985(sin80°) due to the higher optical efficiency of the system is necessary. The NA of MLA of 0.574(sin35°) is set to be larger than the half field of view (HFOV) of the condenser. The MLA of two-element configuration is adopted as considering the molding process constrain. The micro-lens pitch of MLA of 1.225 mm× 0.919 mm is compatible with the panel-size ratio of SVGA.
The size of non-image system is 13.1 mm× 11 mm× 11 mm, and its volume is 1.6 cc. The size of the pico-projector is 34 mm× 31 mm× 11 mm, and the whole volume of projector is 11.6 cc. The efficiency of proposed projector of 4.0 lm/W is demonstrated experimentally under the power consumption of LED light source of 1 W.

關鍵字(中)

★ 矽基液晶
★ 微透鏡陣列
★ 非成像系統
★ 微型投影機

關鍵字(英)

★ liquid crystal on silicon
★ micro-lens array
★ non-image system
★ pico-projector

論文目次

摘要...................................i
Abstract..............................ii
目錄..................................iii
圖目錄..................................v
表目錄.................................ix
第1章緒論............................1
1-1 前言............................1
1-2 研究動機.........................7
1-3 文獻回顧.........................8
第2章微投影機系統架構..................11
2-1 系統架構與工作原理................11
2-2 系統元件........................12
2-2.1 LED光源.........................12
2-2.2 顯示面板........................18
2-2.3 偏振分光器.......................19
第3章非成像系統光學設計................26
3-1 光展量與朗博光源..................26
3-2 聚光鏡分析.......................29
3-3 準直鏡設計與分析..................31
3-4 微透鏡陣列設計與分析...............34
第4章實作量測.........................45
4-1 效率量測.........................50
4-2 均勻度量測.......................51
4-2.1 顯示面板處之均勻度................51
4-2.2 屏幕處之均勻度...................53
第5章結論與展望.......................56
參考資料.................................57

參考文獻

[1] M. G. Robinson, J. Chen, and G. D. Sharp, Polarization Engineering for LCD Projection: John Wiley & Sons, 2005.
[2] van den Brandt et al., "Optical illumination system and projection apparatus comprising such a system " U.S. patent 5098184, 1992.
[3] P. Schreiber, S. Kudaev, P. Dannberg, and U. D. Zeitner, "Homogeneous LED-illumination using microlens arrays," SPIE, 2005.
[4] Y. Meuret, B. Vangiel, F. Christiaens, and H. Thienpont, "Efficient illumination in LED-based projection system using lenslet integrators," Opt. Eng. 6196, pp. 619605-619620, 2006.
[5] B. Van Giel, Y. Meuret, and H. Thienpont, "Using a fly’s eye integrator in efficient illumination engines with multiple light-emitting diode light sources," Optical Engineering, vol. 46, p. 043001, 2007.
[6] G. Harbers, M. Keuper, and S. Paolini, "Performance of High Power LED Illuminators in Color Sequential Projection Displays," presented at the Proceeding of Internal Display Workshop (Proc. IDW ’’03), 2003.
[7] M. H. Keuper, G. Harbers, and S. Paolini, "RGB LED Illuminator for Pocket-Sized Projectors," presented at the Society for Information Display (SID ’’04), Santa Ana, Calif., 2004.
[8] H. Murat, H. D. Smet, and D. Cuypers, "Compact LED projector with tapered light pipes for moderate light output applications," Displays, vol. 27, pp. 117-123, 2006.
[9] J. W. Pan, C. M. Wang, H. C. Lan, W. S. Sun, and J. Y. Chang, "Homogenized LED-illumination using microlens arrays for a pocket-sized projector," OpticsExpress, 2007.
[10] J. W. Pan, S. H. Tu, C. M. Wang, and C. J. Yang, "High efficiency pocket-size projector with a compact projection lens and a light emitting diode-based light source system," AppliedOptics, 2008.
[11] S. C. Shin, Y. Jung, T. J. Ahn, S. S. Jeong, S. G. Lee, and K. Y. Choi, "The Compact Systems Design Based on DMD and the Straight Line 2-Channel LED for a Mobile Embedded Pico Projector," Journal of Display Technology, vol. 8, pp. 219-224, Apr 2012.
[12] A. Wilm, "Requirements on LEDs in etendue limited light engines," vol. 7001, pp. 70010F-70010F-10, 2008.
[13] S. Morgott, S. Groetsch, W. Schnabel, and D. Wiener, "LED light sources for mobile embedded projection," pp. 77230W-77230W-9, 2010.
[14] E. Hecht, Optics 4th. ed: Addison Wesley, 2002.
[15] E. H. Stupp and B. M. S., Projection Display: John Wiley & Sons Ltd, 1999.
[16] X. J. Yu, Y. L. Ho, L. Tan, H. C. Huang, and H. S. Kwok, "LED-based projection systems," Journal of Display Technology, vol. 3, pp. 295-303, Sep 2007.
[17] F. Fournier and J. Rolland, "Design methodology for high brightness projectors," Journal of Display Technology, vol. 4, pp. 86-91, Mar 2008.
[18] Duncan et al., "Polarizing beam splitter " U.S. patent 7362507, 2005.
[19] B. Phillips et al., "A High Efficiency Mobile Projection Engine Utilizing Color Sequential Illumination," SID 08 Digest of Technical Papers, pp. 178-180, 2009.

指導教授

伍茂仁、孫文信、紀國鐘
(Mao-jen Wu、Wen-shing Sun、Gou-chung Chi)

審核日期

2012-8-18

推文