參考文獻 |
[1] C.A. Balanis, Modern antenna handbook, Wiley, 2008, ch. 23, sec. 23.2.
[2] K. Fijimoto, Mobile antenna system handbook, 3rd ed. Boston, Artech, 2008, ch. 5, sec. 5.1.
[3] Digital cellular telecommunications system (Phase 2+); Radio transmission and reception (GSM 05.05), European Telecommunications Standards Institute, Sophia Antipolis Cedex, France, Apr. 1998.
[4] IEEE Std. 802.11, “Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications,” June 1997.
[5] IEEE Standard for Local and Metropolitan Area Networks, Part 16: Air Interface for Fixed and Mobile Broadband Wireless Access Systems, Draft 802.16e/D9, 2005.
[6] R. Li, B. Pan, J. Laskar, and M.M. Tentzeris, “A compact broadband planar antenna for GPS, DCS-1800, IMT-2000, and WLAN applications,” IEEE Antennas Wireless Propag. Lett., vol. 6, pp. 25–27, 2007.
[7] Y.S. Shin, and S.O. Park, “.A compact loop type antenna for Bluetooth, S-DMB, Wibro, WiMax, and WLAN applications,” IEEE Antennas Wireless Propag. Lett., vol. 6, pp. 320–323, 2007.
[8] C. R. Rowell, and R. D. Murch, “A capacitively loaded PIFA for compact mobile telephone handsets,” IEEE Trans. Antennas Propag., vol. 45, no. 5, pp. 837–842, May 1997.
[9] P. Nepa, G. Manara, A. A. Serra, and G. Nenna, “Multiband PIFA for WLAN mobile terminals,” IEEE Antennas Wireless Propag. Lett., vol. 4, pp. 349–350, 2005.
[10] C. R. Rowell, and R. D. Murch, “A compact PIFA suitable for dual-frequency 900/1800-MHz 0peration,” IEEE Trans. Antennas Propag., vol. 46, no. 4, pp. 596–598, Apr. 1998.
[11] T. Taga, and K. Tsunekawa, “Performance analysis of a built-in planar inverted F antenna for 800 MHz band portable radio units,” in Proc. IEEE Joural on Selected Areas in Commumications., vol. SAC-5, no. 5, pp.921–929, Jun. 1987.
[12] K. Tsunoda, and T. Taga, “Analysis of planar inverted F antenna using spatial network method,” in Proc. IEEE Antennas and Propagation Society Int. Symp., vol. 2, pp.44–47, May 1990.
[13] M.K.Karkkainen, “Meandered multiband PIFA with coplanar parasitic patches,” IEEE Microwave Wireless Comp. Lett., vol. 15, no. 10, pp. 630–632, Oct. 2005.
[14] P. Ciais, R. Staraj, G. Kossiavas, and C, Luxey, “Design of an internal quad-band antenna for mobile phones,” IEEE Microwave Wireless Comp. Lett., vol. 14, no. 4, pp. 148–150, Apr. 2004.
[15] Y.X. Guo, and H.S. Tan, “New compact six-band internal antenna,” IEEE Antennas Wireless Propag. Lett., vol. 3, pp. 295–297, 2004.
[16] S. K. Sharma and L. Shafai, “Investigation of wide-band microstrip slot antenna,” IEEE Trans. Antennas Propag., vol. 52, no. 3, pp. 865–872, Mar. 2004.
[17] N. Behdad and K. Sarabandi, “A wide-band slot antenna design employing a fictitious short circuit concept,” IEEE Trans. Antennas Propag., vol. 53, no. 1, pp. 475–482, Jan. 2005.
[18] N. Behdad and K. Sarabandi, “A multiresonant single-element wideband slot antenna,” IEEE Antennas Wireless Propag. Lett., vol. 3, pp. 5–8, 2004.
[19] N. Behdad and K. Sarabandi, “A varactor-tuned dual-band slot antenna,” IEEE Trans. Antennas Propag., vol. 54, no. 2, pp. 401–408, Feb. 2006.
[20] S. L. Latif, L. Shafai, and S. K. Sharma, “Bandwidth enhancement and size reduction of microstrip slot antennas,” IEEE Trans. Antennas Propag., vol. 53, no. 3, pp. 994–1002, Mar. 2005.
[21] W. Ren, Z. Shi, Y. Li, and K. Chen, “Compact dual-band T-slot antenna for 2.4/5 GHz wireless applications,” in Proc. Communications, Circuits and System Proceedings, 2006 Inernational Conference., vol. 4, pp.2493–2497, Jun. 2006.
[22] K. L. Wong and L. C. Lee, “Multiband printed monopole slot antenna for WWAN operation in the laptop computer,” IEEE Trans. Antennas Propag., vol. 57, no. 2, pp. 324–330, Feb. 2009
[23] R. Janaswamy, “Effect of element mutual coupling on the capacity of fixed length linear arrays,” IEEE Antennas Wireless Propag. Lett., vol.1, pp. 157–160, 2002.
[24] B.N. Getu, and R. Janaswamy, “The effect of mutual coupling on the capacity of the MIMO cube,” IEEE Antennas and Wireless Propag Lett., vol. 4, pp. 240–244, 2005.
[25] M.F. Abedin, and M. Ali, “Effects of a smaller unit cellplanar EBG structure on the mutual coupling of a printed dipole array,” IEEE Antennas and Wireless Propag Lett., vol.4, pp. 274-276, 2005.
[26] B.Mohajer-Iravani, S. Shahparnia, and O.M. Ramahi, “ Coupling reduction in enclosures and cavities using electromagnetic band gap structures,” IEEE Trans. Electromagn. Compat.,vol. 48, no. 2, pp. 292–303, May 2006.
[27] T. Heidari, A. Motevasselian, M. Salehi, and A. Tavakoli, “ Mutual coupling reduction of microstrip antennas using defected ground structure, ” IEEE int. Communication Systems Conf., pp. 1–5, Oct. 2006
[28] J. H. Hwang, S. Jung, S. Kang and Y. Kim, “Compact wound-type slot antenna with wide bandwidth,” IEEE Microwave Wireless Comp. Lett., vol. 14, no. 11, pp. 569-571, Nov. 2004.
[29] C.I. Lin and K.L. Wong, “Printed monopole slot antenna for internal multiband mobile phone antenna,” IEEE Trans. Antennas Propag., vol. 55, no. 12, pp. 3690–3697, Dec. 2007.
[30] L. Zhu, R. Fu, and K.L. Wu, “A novel broadband microstrip-fed wide slot antenna with double rejection zeros,” IEEE Antennas Wireless Propag. Lett., vol. 2, pp. 194–196, 2003.
[31] A. P. Zhao and J. Rahola, “Quarter-wavelength wideband slot antenna for 3–5 GHz mobile applications,” IEEE Antennas Wireless Propag. Lett., vol. 4, pp. 421–424, 2005.
[32] W. S. Chen, and K. Y. Ku, “Surface-mountable EMC monopole chip antenna for WLAN operation,” IEEE Trans. Antennas Propag., vol.56, no. 4, pp. 1163–1169, Apr. 2008.
[33] C.M. Su, K.L. Wong, C.L. Tang, and S.H. Yeh, “EMC internal patch antenna for UMTS operation in a mobile device,” IEEE Trans. Antennas Propag., vol.53, no. 11, pp. 3836–3839, Nov. 2005.
[34] K.L Wong, Y.C. Lin, and B. Chen, “Internal patch antenna with a thin air-layer substrate for GSM/DCS operation in a PDA phone,” IEEE Trans. Antennas Propag., vol.55, no. 4, pp. 1165–1172, Apr. 2007.
[35] K.L Wong, C.H. Chang, and Y.C. Lin, “Printed PIFA EM compatible with nearby conducting elements,” IEEE Trans. Antennas Propag., vol.55, no. 10, pp. 2919–2922, Oct. 2007.
[36] K.L Wong, and C.H. Chang, “Band-rejected design of the printed open slot antenna for WLAN-WiMAX operation” IEEE Trans. Antennas Propag., vol.54, no. 4, pp. 1100–1104, Apr. 2006.
[37] High Frequency Structure Simulator (HFSS), version 11.0, Ansoft Corporation.
[38] D.M. Pozar, “A reciprocity method of analysis for printed slot,” IEEE Trans. Antennas Propag., vol. ap-34, no.12, pp. 1439–1446, Dec. 1986.
[39] W. Hong, N. Behdad, and K. Sarabandi, “Size reduction of cavity-backed slot antennas,” IEEE Trans. Antennas Propag., vol. 54, no.5, pp. 1461–1466, May 2006.
[40] K. C. Gupta, Microstrip Lines and Slotlines, 2nd ed. Norwood, MA: Artech, 1996, p. 273.
[41] L. Zhu and K. Wu, “Complete circuit model of microstrip-fed slot radiator: Theory and experiments,” IEEE Microwave Guided Wave Lett., vol. 9, no. 8, pp. 305–307, Aug. 1999.
[42] P.L. Sun, H.L. Dai, and C.H. Huang, “Dual band slot antenna with single feed line,” U.S. Patent 6 677 909 B2, Jan. 13, 2004.
[43] R. Bancroft, “Dual slot radiator single feedpoint printed circuit antenna,” U.S. Patent 7 129 902 B2, Oct. 31, 2006.
[44] W. S. Chen, K. Y. Ku, C. H. Lin and K.-L. Wong, “Study of small open slot antenna for broadband operation” In Proc. Proceeding of iWAT2008, pp. 490–493, Mar. 2008.
[45] Agilent PNA Series Network Analyzer User’s and Programming Guide, Agilent Technologies, 2008
[46] P. Y. Lai and K. L. Wong, “Capacitively fed hybrid monopole/slot chip antenna for 2.5/3.5/5.5 GHz Wimax operation in the mobile phone,” Microw. Opt. Technol. Lett., vol. 50, pp.2689–2694, Oct. 2008.
[47] C. J. Wang and S. W. Chang, “A technique of bandwidth enhancement for slot antenna,” IEEE Trans. Antennas Propag.,vol. 56, no. 10, pp. 3321–3324, Oct. 2008.
[48] Advance Design System (ADS), version 2009, Aglient Technologies.
[49] B. Clerckx, D. V. Janvier, C. Oestges and L. Vandendorpe, “Mutual coupling effects on the channel capacity and the space-time processing of MIMO communication systems,” IEEE Communications Conf., vol. 4, pp. 2638-2642, May 2003.
[50] R. G. Vaughan and J. B. Andersen, “Antenna diversity in mobile communications,” IEEE Transactions on Vehicular Technology, vol. 36, no. 4, pp. 149-172, Nov. 1987.
[51] A.A. Abouda, H.M. El-Sallabi, and S.G. Haggman, “Effect of mutual coupling on BER performance of alamouti scheme,” in Proc. IEEE Antennas and Propagation Society Int. Symp., pp. 4797–4800, 2006.
[52] C. Waldschmidt, J.v. Hagen, W Wiesbeck, “Influence and modelling of mutual coupling in MIMO and diversity systems,” in Proc. IEEE Int. Symp. Antenna and propagation, vol 3, pp.190–193, Jun. 2002.
[53] M.I. Montrose, Print circuit board design techniques for EMC compliance, IEEE press, 1996.
[54] R. Abhari and G. V. Eleftheriades, “Metallo-dielectric electromagnetic bandgap structures for suppression and isolation of the parallel-plate noise in high-speed circuits,” IEEE Trans. Microw. Theory Tech., vol. 51, no. 6, pp. 1629–1639, Jun. 2003.
[55] T. Kamgaing and O. M. Ramahi, “A novel power plane with integrated simultaneous switching noise mitigation capability using high-impedance surfaces,” IEEE Microw.Wireless Compon. Lett., vol. 13, no. 1, pp. 21–23, Jan. 2003.
[56] F. Yang and Y. Rahmat-Samii, “Microstrip antennas integrated with electromagnetic band-gap (EBG) structures: A low mutual coupling design for array applications,”IEEE Trans. Ant. Propagat., vol. 51, pp. 2936–2946, Oct. 2003.
[57] D. Ahn, J. S. Park, C. S. Kim, J. Kim, Y. Qian, and T. Itoh, “A design of the low-pass filter using the novel microstrip defected ground structure,” IEEE Microw. Theory Tech., vol. 49, no. 1, pp. 86–93, Jan. 2001.
[58] C.Y Chiu, C.H, Cheng, R.D. Murch, and C. R. Rowell, “Reduction of mutual coupling between closely-packed antenna elements” IEEE Trans. Ant. Propagat., vol. 55, pp. 1732 – 1738, Jun. 2007.
[59] K.J. Kin, W.G. Lim, and J.W. Yu, “ High isolation internal dual-band planar inverted-F antenna diversity system with band-notched slots for MIMO terminals” Microwave Conf., European, pp. 1147-1417, Sep. 2006.
[60] RFANT5220110A2T Data Manual, WLSIN Technology Inc., ROC, 2005.
[61] S.H. Chae, S.K. Oh, and S.O. Park, “Analysis of mutual coupling, correlations, and TARC in WiBro MIMO array antenna,” IEEE Antennas and Wireless Propag Lett., vol. 4, pp. 240-244, 2005.
[62] J. H. Lu and K. L. Wong, “Single-feed dual-frequency equilateral-triangular microstrip antenna with pair of spur lines,” Eletronics. Lett., vol. 34, no. 12, pp 1171-1173, Jun. 1998.
[63] J. H. Lu, H.C. Yu, and K. L. Wong, “Compact circular polarisation design for equilateral-triangular microstrip antenna with spur lines,” Eletronics. Lett., vol. 34, no. 21, pp. 1989-1990, Oct. 1998.
[64] W.H. Tu, and K. Chang, “Compact microstrip bandstop filter using open stub and spurline,” IEEE Antennas and Wireless Propag Lett., vol.5, pp. 268-270, Apr. 2005.
[65] T.C. Edwards and M.B. Steer, Foundations of interconnect and microstrip design, Wiley, 2000.
[66] Z.N. Chen, “ Experiments on input impedance of tilted planar nonople antenna” Microwave Opt Technol Lett., vol. 26, no. 3, pp. 202-204, Aug. 2000.
[67] R.N. Simons, N.I. Dib and L.P.B. Katehi, “Modeling of coplanar stripline discontinuities,” IEEE Trans. Microwave Theory Tech, vol. 44, no. 5, pp. 711 – 716, May 1996.
[68] K. Goverdhanam, R.N. Simons, and L.P.B. Katehi, “Coplanar stripline components for high-frequency applications,” IEEE Trans. Microwave Theory Tech, vol. 45, no. 10, pp. 1725 – 1729, Oct. 1997
[69] Y.H. Suh and K. Chang, “Coplanar stripline resonators modeling and applications to filters,” IEEE Trans. Microwave Theory Tech, vol. 50, no. 5, pp. 1289 – 1296, May 2002.
[70] D.M. Pozar, Microwave engineering, Wiley, 1998.
|