可變旋轉角度對於拍翼式飛行機器人升力 拉力效應之研究

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：36

、訪客IP：3.142.198.241

姓名

陳子硯(Tzu-Yen Chen) 查詢紙本館藏

畢業系所

電機工程學系

論文名稱

可變旋轉角度對於拍翼式飛行機器人升力拉力效應之研究
(Study on the Effect of Changeable Rotation Angle to Lift and Drag Force for Flapping Wing Aerial Robots)

相關論文

★ E2T-iSEE:應用於事件與情感狀態轉移排程器之編輯	★ “偶”:具情感之球型機器人
★ 陣列區塊電容產生器於製程設計套件之評量	★ 應用於數位家庭整合計畫影像傳輸子系統之設計考量與實現
★ LED 背光模組靜電放電路徑	★ 電阻串連式連續參考值產生器於製程設計套件之評量
★ 短篇故事分類與敘述	★ 延伸考慮製程參數相關性之類比電路階層式變異數分析器
★ 以電子電路觀點對田口式惠斯登電橋模擬實例的再分析	★ 應用於交換電容ΔΣ調變電路之電容排列良率自動化擺置平台
★ 陣列MiM電容的自動化佈局	★ 陣列MiM電容的平衡接點之通道繞線法
★ 氣象資訊達人	★ 嵌入式WHDVI多核心Forth微控制器之設計
★ 應用於電容陣列區塊之維持比值良率的通道繞線法	★ 使用於矽穿孔耦合分析之垂直十字鏈基板結構

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

拍翼式飛行機器人,在實際的應用上可以用於偵查、搜救、軍事以及娛樂等等用途。而拍翼式飛行機器人又擁有質量輕、低噪音、省能源以及行動靈敏的特性。在此類型飛行機器人的設計上面,很很多參數會造成升力以及阻力的引響,大致來說,會有馬赫數(mach number)、攻角(angle of attack)、旋轉角度(rotation angle)、升力係數(lift coefficient)、阻力係數(drag coefficient)等主要參數。機構的部分是使用 LEGO mindstorms 相關零組件組合而成,利用 LEGO 相關零配件即可組裝出傳動機構以及旋轉機構。傳動機構及旋轉機構各考慮兩種架構,並之後比較其優缺點。本研究著重於變化旋轉角, 對於整體的升力及阻力的影響。然而,本研究著重於靜態上的基本分析模擬, 故選擇定機翼的模擬器來做實際情況的推演及預測。模擬器是使用 Stark Aerospace 公司所設計的空氣動力學分析軟體 VLAERO+來做模擬。在此假設情況下,發現調整旋轉角度可以控制升力以及阻力的大小,但是需要一次調整一邊的機翼,而非一次調整兩邊機翼。已知調整旋轉角度可以調整升力及阻力,故在未來的情況下,可進一步設計有限狀態機做自動化調整的規劃。

摘要(英)

In the real application, flapping aerial robots can be used in investigation, rescue, military and entertainment. They have some special advantages and characteristics such as light weight, low noise, energy saving, and quick action. In design of this kind of robots, there are many parameters such as Mach number, angle of attack, rotation angle, lift coefficient, and drag coefficient to influence lift and drag force. We use LEGO Mindstorms and some related parts and accessories to realize our mechanism. There are two types of transmission and rotation mechanism. We use graphical software NXT 2.1 which is developed by LEGO to program and control our mechanism. In brief summary of mechanism design, we compare pros and cons of two types of transmission and rotation mechanism. This research focuses on that rotation angle affecting the lift and drag force in the whole system. Especially, it aims on static analysis of rotation angle, so we choose fixed wing simulator to simulate and predict the real situations. This simulator is called VLAERO+ which is an aerodynamic analysis tool developed by Stark Aerospace company. In this assumption, we found that changing rotation angle can control magnitude of lift and drag force. But, we can only change one side of two wings. On future work, we can use existing research data to realize automation flapping aerial robot.

關鍵字(中)

★ 旋轉角度
★ 微飛行器
★ 拍翼式飛行機器人

關鍵字(英)

論文目次

中文摘要 ......................................................... I 英文摘要 ........................................................ II 誌謝 ........................................................... III 目次 ............................................................ IV 圖目錄 .......................................................... VI 第一章緒論......................................................1
1.1 研究背景.........................................................................................................1 1.2 研究目的與架構.............................................................................................2
第二章文獻回顧 .................................................. 3
第三章仿昆蟲微飛行器設計 ........................................9
3.1 飛行昆蟲機器人設計流程.............................................................................9
3.2 生物模式觀察.................................................................................................9
3.2.1 蜻蜓飛行模式簡介................................................10 3.2.2 蝴蝶飛行模式簡介................................................11 3.2.3 蜜蜂飛行模式簡介................................................11
3.3 機構設計.......................................................................................................12 3.3.1 動力傳輸架構....................................................12
3.3.2 旋轉角度架構....................................................14
第四章實驗設計 ................................................. 16
4.1 實驗參數介紹...............................................................................................16 4.2 實驗軟體.......................................................................................................20
4.2.1 飛行模擬模型....................................................20 4.3 實驗規劃.......................................................................................................21
4.3.1 實驗一馬赫數與旋轉角度的改變...................................21 4.3.2 實驗二改變攻角.................................................22 4.3.3 實驗三調整旋轉角度.............................................22
第五章實驗結果及討論 ...........................................23
5.1 實驗一結果與討論.......................................................................................23 5.2 實驗二結果與討論.......................................................................................24
IV
5.3 實驗三結果與討論.......................................................................................27 第六章結論.....................................................46
6.1 研究發現.......................................................................................................46 6.2 建議............................................................................................................... 46
參考文獻 ........................................................ 47

參考文獻

[1] Y. C. Tai, and C. M. Ho, “MEMS wing technology for a battery-powered
ornithopter,” The 13th IEEE International Conference on Micro Electro
Mechanical Systems, pp.799-804, 2000.
[2] W. Shyy, M. Berg, and D. Ljungqvist, “Flapping and flexible wings for
biological and micro air vehicles,” Progress in Aerospace Sciences, Vol. 35,
pp. 455-505, 1999.
[3] J. M.WAKELING and C. P. ELLINGTON, “Dragonfly flight. I. Gliding
flight and steady-state aerodynamic forces,”Journal of Experimental
Biology, 1997, 200.3: 543-556.
[4] J. M. WAKELING and C. P. ELLINGTON, “Dragonfly flight. II. Velocities,
accelerations and kinematics of flapping flight,” Journal of experimental
biology, 1997, 200.3: 557-582.
[5] J. M. WAKELING and C. P. ELLINGTON, “Dragonfly flight. III. Lift and
power requirements,”Journal of Experimental Biology, 1997, 200.3:
583-600.
[6] A. Peter, W. Krister, and N. Peter, “Creation of a Learning, flying robot by means of evolution,” in GECCO ’02 Proceedings of the Genetic and Evolutionary Computation Conference, pp. 1279-1285, 2002.
[7] W. Wei-Chung, L. Schenato, R.J. Wood, and R.S. Fearing, "Biomimetic sensor suite for flight control of a micromechanical flying insect: design and experimental results," Robotics and Automation, 2003. Proceedings. ICRA ’03. IEEE International Conference on , vol.1, pp. 1146- 1151 vol.1, 14-19 Sept. 2003.
[8] D. Xinyan, L. Schenato, W. Wei Chung, and S.S. Sastry, "Flapping flight for biomimetic robotic insects: Part I-System Modeling," Robotics, IEEE Transactions on , vol.22, no.4, pp.776-788, Aug. 2006.
[9] D. Xinyan, L. Schenato, W. Wei Chung, and S.S. Sastry, "Flapping flight for biomimetic robotic insects: Part II-Flight Control Design," Robotics, IEEE Transactions on , vol.22, no.4, pp.789-803, Aug. 2006.
47
[10] R. Wood, “Liftoff of a 60mg flapping-wing MAV,” in IEEE/RSJ International Conference on Intelligent Robots and Systems, 2007, pp. 1889-1894.
[11] R. Wood, “Design, fabrication, and analysis, of a 3DOF, 3cm flapping-wing mav,” in IEEE/RSJ International Conference on Intelligent Robots and Systems, 2007, pp.1576-1581.
[12] R. Wood, “The first takeoff of a biologically inspired at-scale robotic insect,” in IEEE Transactions on Robotics, vol. 24, no. 2, 2008, pp.341-347.
[13] http://www.am-inc.com/VLAERO.shtml
[14] 廖俊瑋,”翼展 10 公分之拍翼式微飛行器研製,”淡江大學機械與機電工程學系碩士論文 2009
[15] 何仁揚,”拍撲式微飛行器之製作及其現地升力之量測研究,”淡江大學機械與機電工程學系碩士論文 2005
[16] http://catalog.digitalarchives.tw/item/00/14/5a/b2.html
[17] http://goo.gl/3oZ95
[18] http://www.nipic.com/show/1/41/58a2e7ff38b832b2.html
[19] http://goo.gl/doK0B
[20] http://zh.wikipedia.org/wiki/File:Induced_drag_r.svg
[21] http://zh.wikipedia.org

指導教授

陳竹一(Jwu-E Chen)

審核日期

2013-7-26

推文