參考文獻 |
[1]Solar, H. Berenguer, R. Adin, I. Alvarado, U. Cendoya, I., “A Fully Integrated 26.5 dBm CMOS Power Amplifier for IEEE 802.11a WLAN Standard with on-chip power inductors,” IEEE Microwave Symp. Digest, vol., no., pp.1875-1878, 11-16 Jun. 2006.
[2]Noh, Y.S. Kim, J.H. Park, J.H. Park, C.S. “A 3.3V Operation Single HBT Power Amplifier MMIC For 2.4GHz/5GHz Dual-Band WLAN Applications,” IEEE Radio and Wireless Conference, vol. 19, no. 22, pp. 483- 486, Sept. 2004.
[3]Wei Wang Zhang, Y.P. , “0.18-μm CMOS push-pull power amplifier with antenna in IC package, ” IEEE Microw. and Wireless Compon. Lett., vol.14, no.1, pp. 13- 15, Jan. 2004
[4]Tu, S.H.-L. Sky Chang-Hung Chen , “A 5.25-GHz CMOS cascode class-AB power amplifier for 802.11a WLAN,” IEEE Internatonal Conference on Microelectronics (ICM), vol., no., pp.11-14, 29-31 Dec. 2007.
[5]Gruner, D. Gustat, H. Boeck, G. , “Fully Integrated 5.8 GHz SiGe Power Amplifier,” European Microw. Conf. (EuMC) , vol.27, no.31, pp.301-304, Oct. 2008.
[6]Hyun-Cheol Bae, Sang-Hoon Kim, Young-Joo Song, Sang-Heung Lee, Ja-Yol Lee, Jin-Young Kang , “A wideband fully integrated SiGe BiCMOS medium power amplifier,” European Microw. Conf. (EuMC) , vol.3, no.6, pp. 4, Oct. 2005.
[7]Kidwai, A.A. Nazimov, A. Eilat, Y. Degani, O. , “Fully integrated 23dBm transmit chain with on-chip power amplifier and balun for 802.11a application in standard 45nm CMOS process,” IEEE Radio Frequency Integrated Circuits Symposium (RFIC) , vol. 7, no. 9, pp. 273-276, Jun. 2009.
[8]He´ ctorSolar, RocBerenguer, Joaquı´n deNob, In˜aki Gurutzeag, UnaiAlvarado , JonLegarda, “A fully integrated 23.2 dBm P1dB CMOS power amplifier for the IEEE802.11a with 29% PAE,” VLSI Journal 2009.
[9]Pin-Cheng Huang, Kun-You Lin, Huei Wang , “A 4–17 GHz Darlington Cascode Broadband Medium Power Amplifier in 0.18-$mu$ m CMOS Technology,” IEEE Microw. and Wireless Compon. Lett., vol.20, no.1, pp.43-45, Jan. 2010.
[10]YongJu Suh, Jiangtao Sun, Horie, K. Itoh, N. Yoshimasu, T. , “Fully-integrated novel high efficiency linear CMOS power amplifier for 5.8 GHz ETC applications,” IEEE Proc. Asia-Pacific Microw. Conf.(APMC), vol. 7, no. 10, pp.365-368, Dec. 2009.
[11]Saari, V. Juurakko, P. Ryynanen, J. Halonen, K. , “Integrated 2.4 GHz class-E CMOS power amplifier,” IEEE Radio Frequency Integrated Circuits Symposium (RFIC), vol. 12, no. 14, pp. 645- 648, Jun. 2005.
[12]Andrei V. Grebennikov and Herbert Jaeger, “Class E with parallel circuit - A New challenge for high-efficiency RF and microwave power amplifiers,” IEEE MTT-S Int. Microw. Symp. Dig, pp.1627-1630, Jan. 2002.
[13]N. O. Sokal and A. D. Sokal, “Class-E-A new class of high-efficiency tuned single-ended switching power amplifiers,” IEEE J. Solid-State Circuits, vol. SC-10, no. 3, pp. 168-176, Jun. 1975.
[14]N. Kumar, C. Prakash, A. Grebennikov, and A. Mediano, “High-efficiency broadband parallel-circuit Class E RF power amplifier with reactance compensation technique,” IEEE Trans. Microw. Theory Tech., vol. 56, no. 3, pp. 604–612, Mar. 2008.
[15]Y. Song, S. Lee, E. Cho, J. Lee, S. Nam, “A CMOS Class-E Power Amplifier With Voltage Stress Relief and Enhanced Efficiency,” IEEE Trans. Microw. Theory Tech. , vol. 58, no. 2, pp.310-317 , Feb. 2010.
[16]Jing-Lin Kuo, Zuo-Min Tsai, Kun-You Lin and Huei Wang, “A 50 to 70 GHz Power Amplifier Using 90 nm CMOS Technology,” IEEE Micro. Wireless Compon. Lett., vol. 19, no. 1, Jan. 2009.
[17]Yung-Nien Jen, Jeng-Han Tsai, Tian-Wei Huang, and Huei Wang “Design and Analysis of a 55–71-GHz Compact and Broadband Distributed Active Transformer Power Amplifier in 90-nm CMOS Process,” IEEE Trans. Microw. Theory Tech., vol. 57, NO. 7, Jul. 2009.
[18]Debasis Dawn, Saikat Sarkar, Padmanava Sen, Bevin Perumana, Matthew Leung, Navin Mallavarpu, Stephane Pinel, and Joy Laskar, “60GHz CMOS power amplifier with 20-dB-gain and 12dBm Psat, ” IEEE MTT-S Int. Microw. Symp. Dig, vol. 7, no. 12, pp.537-540, Jun. 2009.
[19]Dajie Zeng, Hongrui Wang, Dongxu Yang, Hongda Zheng, Jinying Xue, Yan Wang, Yaohui Zhang, Zhiping Yu , “A high efficiency 60GHz power amplifier in 90nm CMOS, ” IEEE I. Solid-State Circuits, vol. 1, no. 4, pp.693-695, Nov. 2010.
[20]Naoyuki Kurita and Hiroshi Kondoh , “60GHz and 80GHz wide band power amplifier MMICs in 90nm CMOS technology, ” IEEE Radio Frequency Integrated Circuits Symposium (RFIC), vol. 7, no. 9, pp.39-42, Jun. 2009.
[21]Chi Y Law, Anh-Vu Pham , “A high-gain 60GHz power amplifier with 20dBm output power in 90nm CMOS, ” IEEE I. Solid-State Circuits, vol. 7, no. 11, pp.426-427, Feb. 2010.
[22]Terry Yao, Gordon, M.Q., Tang, K.K.W., Yau, K.H.K., Ming-Ta Yang, Schvan, P., Voinigescu, S.P., “Algorithmic Design of CMOS LNAs and PAs for 60-GHz Radio, ” IEEE J. Solid-State Circuits, vol.42, no.5, pp.1044-1057, May 2007.
[23]Chia-Yu Hsieh, Jhe-Jia Kuo, Zuo-Min Tsai, Kun-You Lin , “A 57–66 GHz medium power amplifier in 65-nm CMOS technology, ” IEEE Proc. Asia-Pacific Microw. Conf.(APMC), vol., no., pp.1617-1620, 7-10 Dec. 2010.
[24]S. Pinel, S. Sarkar, P. Sen, B. Perumana, D. Yeh, D. Dawn, and J. Laskar, “A 90 nm CMOS 60 GHz radio, ” IEEE I. Solid-State Circuits, pp. 130-131 , Feb. 2008.
[25]Ichiro Aoki, Scott Kee, Rahul Magoon, Roberto Aparicio, Florian Bohn, Jeff Zachan, Goeff Hatcher, and Ali Hajimiri, “A Fully-Integrated Quad-Band GSM/GPRS CMOS Power Amplifier,” IEEE J. Solid-State Circuits, vol.43, no.12, pp.2747-2758, Dec. 2008.
[26]Behzad Razavi, “Design of analog CMOS integrated circuits,” McGraw-Hill, 2001.
[27]David M. Pozar, “Microwave Engineering, third edition,” John Wiley & Sons, 2004 |