透明導電膜功函數對矽異質接面太陽能電池之影響

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：29

、訪客IP：3.144.46.90

姓名

周世欽(Shi-Qin Zhou) 查詢紙本館藏

畢業系所

光電科學與工程學系

論文名稱

透明導電膜功函數對矽異質接面太陽能電池之影響
(Effect of Transparent Conductive Oxide Work Function on Silicon Heterojunction Solar Cell)

相關論文

★ 膜堆光學導納量測儀	★ 以奈米壓印改善陽極氧化鋁週期性
★ 含氫矽薄膜太陽電池材料之光電特性研究	★ 自我複製結構膜光學性質之研究
★ 溫度及應力對高密度分波多工器(DWDM)濾光片中心波長飄移之研究	★ 以射頻磁控濺鍍法鍍製P型和N型微晶矽薄膜之研究
★ 以奈米小球提升矽薄膜太陽能電池吸收之研究	★ 定光電流量測法在氫化矽薄膜特性的研究
★ 動態干涉儀量測薄膜之光學常數	★ 反應式濺鍍過渡態矽薄膜之研究
★ 光子晶體偏振分光鏡之設計與製作	★ 偏壓對射頻濺鍍非晶矽太陽能薄膜特性之研究
★ 負折射率材料應用於抗反射與窄帶濾光片之設計	★ 負電荷介質材料在矽晶太陽電池之研究
★ 自我複製式偏振分光鏡製作與誤差分析	★ 以光激發螢光影像量測矽太陽能電池額外載子生命期及串聯電阻分佈之研究

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

本實驗分為兩大方向來討論，其一是透明導電膜ITO單層膜的分析，第二是ITO應用於矽異質接面太陽能電池探討。ITO單層膜主要分兩大主軸，優化光電特性以及提高功函數；優化光電特性部分，我們利用改變製程功率以及溫度，得到ITO最佳的電阻率為1.21x10-4 (Ω-cm)，在波長400~1100 nm下最佳的平均穿透率為82.97%；也利用不同製程環境得到功函數4.36~5.20 eV的分佈範圍。
電池元件討論部分將ITO分為兩層鍍製，和P層接觸的下層ITO，討論功函數對電池的影響；上層ITO為傳導層，具備良好的光電特性。根據本實驗結果，當功函數越高，電池的開路電壓明顯提高，元件效率也提升。當ITO功函數為4.36 eV，光電轉換效率為3.8%；若將功函數提升為5.20 eV可得最佳轉換效率8.3%。

摘要(英)

The experiment discussed in two parts, one of which was analysis single layer of transparent conductive oxide ITO, and the other was discussion ITO applied in heterojunction solar cells. In the research, we optimized ITO electrical and optical properties with sputtering different deposition parameters. In our study, the lowest value of resistivity was 1.21x10-4 (Ω-cm) and the best average optical transmittance was 82.97% in the range of 400~1100 nm. Besides, we can control ITO work function range from 4.36 eV to 5.20 eV.
In this study, we deposited two layers different properties ITO thin films on silicon heterojuction solar cell. ITO film that contacted with amorphous P-type silicon was used to discuss the relation between work function and cell efficiency. The upper ITO was conductive layer, and it has excellent electrical and optical properties. According to the results, the efficiency and open circuit voltage of cells were better when sputtering ITO with higher work function. ITO films with work function 4.36 eV, the photoelectric conversion efficiency was 3.8%. The best conversion efficiency was 8.3 % with highest ITO work function 5.20 eV.

關鍵字(中)

★ 功函數
★ 異質接面太陽能電池
★ 氧化銦錫

關鍵字(英)

★ work function
★ ITO
★ heterojunction solar cell

論文目次

第一章緒論 1
1-1 前言 1
1-2 太陽能電池的分類 1
1-3 矽晶異質接面太陽能電池簡介 3
1-4 研究目的與動機 4
1-5 論文架構 6
第二章基礎理論 7
2-1 太陽能電池工作原理 7
2-2 電漿濺鍍原理 9
2-3 透明導電膜 10
2-3-1 簡介 10
2-3-2 ITO薄膜的電學特性 11
2-3-3 ITO薄膜的光學特性 13
2-4 半導體能階與功函數相關理論 14
2-4-1 電子的平衡分佈 14
2-4-2 電子濃度和功函數關係 15
第三章實驗流程與量測分析工具 17
3-1 導電膜ITO實驗步驟 17
3-1-1 探討光電特性之ITO薄膜成長條件 18
3-1-2 探討功函數之ITO薄膜成長條件 19
3-2 矽晶異質接面太陽能電池製作 20
3-3 量測與分析工具 21
3-3-1 X光繞射儀(X-ray diffractometer，XRD) 21
3-3-2 霍爾效應量測(Hall effect measurement) 22
3-3-3 四點探針(Four Point Probe) 23
3-3-4 紫外光電子能譜儀(Ultraviolet Photoelectron Spectroscopy，UPS) 24
3-3-5 表面輪廓儀(α-step) 25
第四章實驗結果與討論 26
4-1 較佳光電特性之ITO製備與分析 26
4-1-1 電性探討 26
4-1-2 光學特性探討 28
4-1-3 晶格結構分析 30
4-2 較高功函數ITO製備與分析 32
4-2-1 電性探討 32
4-2-2 晶格結構分析 34
4-2-3 功函數量測分析 35
4-3 模擬討論ITO功函數對異質接面太陽能電池效率影響 37
4-4 ITO薄膜應用於異質接面太陽能電池之效率分析 41
4-4-1 ITO膜厚分析 41
4-4-2 有無ITO薄膜對元件效率影響 42
4-4-3 ITO功函數對元件效率的影響 44
4-4-4 討論高功函數ITO膜厚對元件效率之影響 50
第五章結論 53
參考文獻 55

參考文獻

[1]J. M. Carrasco, L. G. Franquelo, J. T. Bialasiewicz, E. Galvan, R. C. P. Guisado, M. A. M. Prats, et al., "Power-Electronic Systems for the Grid Integration of Renewable Energy Sources: A Survey," Industrial Electronics, IEEE Transactions on, vol. 53, pp. 1002-1016, 2006.
[2]莊嘉琛, "太陽能工程-太陽能電池篇", 全華科技圖書股份有限公司, 民國九十二年三月.
[3]工研院能資所吳志明, "Nanotechnology in energy applications."pp.35, 2005
[4]M. Iwamoto, K. Minami, T. Yamaoki, "Photovoltaic device", United States Patent, No.5066340, 1991.
[5]Y. T. A. Ogane, D. Fujishima, A. Yano, H. Kanno, T. Kinoshita, H. Sakata, M. Taguchi, H. Inoue and E. Maruyama, "Recent progress of HIT solar cells heading for the higher conversion efficiencies," 21th International Photovoltaic Science and Engineering Conference, Fukuoka, 2011.
[6]B. Jagannathan, W. A. Anderson, and J. Coleman, "Amorphous silicon p-type crystalline silicon heterojunction solar cells," Solar Energy Materials and Solar Cells, vol. 46, pp. 289-310, 1997.
[7]D. L. Staebler and C. R. Wronski, "Reversible conductivity changes in discharge-produced amorphous Si," Applied Physics Letters, vol. 31, pp. 292-294, 1977.
[8]W. A. Cady and M. Varadarajan, "RCA Clean Replacement," Journal of The Electrochemical Society, vol. 143, pp. 2064-2067, 1996.
[9]T. D. Moustakas, "Sputtered hydrogenated amorphous silicon," Journal of Electronic Materials, vol. 8, pp. 391-435, 1979.
[10]Y. Tsunomura, Y. Yoshimine, M. Taguchi, T. Baba, T. Kinoshita, H. Kanno, et al., "Twenty-two percent efficiency HIT solar cell," Solar Energy Materials and Solar Cells, vol. 93, pp. 670-673, 2009.
[11]J. Müller, B. Rech, J. Springer, and M. Vanecek, "TCO and light trapping in silicon thin film solar cells," Solar Energy, vol. 77, pp. 917-930, 2004.
[12]L. Zhao, C. L. Zhou, H. L. Li, H. W. Diao, and W. J. Wang, "Design optimization of bifacial HIT solar cells on p-type silicon substrates by simulation," Solar Energy Materials and Solar Cells, vol. 92, pp. 673-681, 2008.
[13]李正中, "薄膜光學與鍍膜技術", 藝軒出版社, 2009.
[14]K. Badeker, "Concerning the electricity conductibility and the thermoelectric energy of several heavy metal bonds, " Ann. Phys., vol.22, pp. 749, 1907.
[15]曲喜新，楊邦朝，姜節儉，張懷武, "電子薄膜材料", 北京科學出版社出版, 1996.
[16]M. Quaas, C. Eggs, and H. Wulff, "Structural studies of ITO thin films with the Rietveld method," Thin Solid Films, vol. 332, pp. 277-281, 1998.
[17]A. J. Steckl and G. Mohammed, "The effect of ambient atmosphere in the annealing of indium tin oxide films," Journal of Applied Physics, vol. 51, pp. 3890-3895, 1980.
[18]L. Gupta, A. Mansingh, and P. K. Srivastava, "Band gap narrowing and the band structure of tin-doped indium oxide films," Thin Solid Films, vol. 176, pp. 33-44, 1989.
[19]M. Bender, W. Seelig, C. Daube, H. Frankenberger, B. Ocker, and J. Stollenwerk, "Dependence of oxygen flow on optical and electrical properties of DC-magnetron sputtered ITO films," Thin Solid Films, vol. 326, pp. 72-77,1998.
[20]E. Yablonovitch, D. L. Allara, C. C. Chang, T. Gmitter, and T. B. Bright, "Unusually Low Surface-Recombination Velocity on Silicon and Germanium Surfaces," Physical Review Letters, vol. 57, pp. 249-252, 1986.
[21]林麗娟, "X光繞射原理及其應用",工業材料，第86期, pp. 100-109, 1997.
[22]張國慶,"佈植矽離子與佈植氮離子於氧化鋅膜之特性分析及氧化鋅膜與金屬的歐姆接觸研究", 國立中央大學碩士論, 2004.
[23]J.-H. Lee, "Effects of substrate temperature on electrical and optical properties ITO films deposited by r.f. magnetron sputtering," Journal of Electroceramics, vol. 23, pp. 554-558, 2009.
[24]G. Haacke, "New figure of merit for transparent conductors," Journal of Applied Physics, vol. 47, pp. 4086-4089, 1976.
[25]楊明輝, "透明導電膜", 藝軒出版社, 2006.
[26]AMPS-1D. Available: http://www.ampsmodeling.org/default.htm.
[27]R. L. Y. Sah, R. N. Noyce, and W. Shockley, "Carrier Generation and Recombination in P-N Junctions and P-N Junction Characteristics," Proceedings of the IRE, vol. 45, pp. 1228-1243, 1957.
[28]N. Hernández-Como and A. Morales-Acevedo, "Simulation of hetero-junction silicon solar cells with AMPS-1D," Solar Energy Materials and Solar Cells, vol. 94, pp. 62-67, 2010.
[29]M. Rahmouni, A. Datta, P. Chatterjee, J. Damon-Lacoste, C. Ballif, and P. R. I. Cabarrocas, "Carrier transport and sensitivity issues in heterojunction with intrinsic thin layer solar cells on N-type crystalline silicon: A computer simulation study," Journal of Applied Physics, vol. 107, 054521, 2010.
[30]V. A. Dao, J. Heo, H. Choi, Y. Kim, S. Park, S. Jung, et al., "Simulation and study of the influence of the buffer intrinsic layer, back-surface field, densities of interface defects, resistivity of p-type silicon substrate and transparent conductive oxide on heterojunction with intrinsic thin-layer (HIT) solar cell," Solar Energy, vol. 84, pp. 777-783, 2010.
[31]E. Centurioni and D. Iencinella, "Role of front contact work function on amorphous silicon/crystalline silicon heterojunction solar cell performance," Electron Device Letters, IEEE, vol. 24, pp. 177-179, 2003.
[32]L. Zhao, C. L. Zhou, H. L. Li, H. W. Diao, and W. J. Wang, "Role of the work function of transparent conductive oxide on the performance of amorphous/crystalline silicon heterojunction solar cells studied by computer simulation," physica status solidi, vol. 205, pp. 1215-1221, 2008.
[33]A. Chen and K. Zhu, "Computer simulation of a-Si/c-Si heterojunction solar cell with high conversion efficiency," Solar Energy, vol. 86, pp. 393-397, 2012.
[34]太陽輻射光譜圖, Available: http://rredc.nrel.gov/solar/spectra/.
[35]D. A. Neamen, "Semiconductor Physics and Devices: Basic Principles (3rd ed.)," McGraw-Hill Higher Education, pp. 344-348, 2003.
[36]蔡宗典, "超薄ITO 透明導電膜應用在觸控面板之研究" , 國立中央大學碩士論文，2008.

指導教授

陳昇暉(Sheng-Hui Chen)

審核日期

2013-8-30

推文