| DC 欄位 |
值 |
語言 |
| DC.contributor | 化學工程與材料工程學系 | zh_TW |
| DC.creator | 吳建銘 | zh_TW |
| DC.creator | Jian-ming Wu | en_US |
| dc.date.accessioned | 2014-8-29T07:39:07Z | |
| dc.date.available | 2014-8-29T07:39:07Z | |
| dc.date.issued | 2014 | |
| dc.identifier.uri | http://ir.lib.ncu.edu.tw:444/thesis/view_etd.asp?URN=101324015 | |
| dc.contributor.department | 化學工程與材料工程學系 | zh_TW |
| DC.description | 國立中央大學 | zh_TW |
| DC.description | National Central University | en_US |
| dc.description.abstract | 導電碳漿是製備各種電子元件的關鍵功能材料，由於導電碳漿具備優異的導電性、硬度、附著性，也多被用於薄膜開關及印刷線路板。其中，導電相碳粉和樹脂黏結相是導電碳漿的重要組成部分，對導電碳漿的導電性能和機械性能影響很大。
本論文主要研究了導電碳漿的製備及加工過程，通過實驗證明導電相比例為60 wt.% 時，能得到最完整的網版印刷圖形。並進一步研究了不同固化條件(固化時間和溫度)對導電碳漿電阻率的影響，發現當固化溫度為180 ℃及固化時間為60分鐘時，能得到最低的電阻率。並使用三滾桶研磨機，而使導電碳漿之平均粒徑減小而能有效地降低電阻。
不同的碳系材料對導電碳漿之性能產生不同的影響，研究不同類型的碳系材料對導電碳漿電性能、硬度、附著力之影響。通過實驗證明了加入石墨烯在石墨中，可以使導電碳漿具有優良的硬度、附著力，以及具有較低的電阻率可以至5ⅹ10-1 Ω•cm. | zh_TW |
| dc.description.abstract | With the rapid development of technology, many researches are putting more emphasis on the conductive carbon ink. Conductive carbon ink is kind of significant functional conducting material which is usually used in membrane switch and printed circuit board. Conductive carbon ink has excellent electrical conductivity and mechanical properties, including hardness and adhesiveness. The conductive phase and resin binder phase are the most influential ingredients in the ink.
The preparation and manufacturing of conductive carbon ink was studied in this thesis, it can be seen from experiments that the optimum composition of conductive phase is 60 wt. %, it has the suitable viscosity to do screen printing。The effect of the curing condition on electrical property also studied at the same time. It can be found that the optimum conditions of curing temperature is 180 ℃, and the optimum curing time is 60 min. Also use the three-roll mills to make the particle size of the carbon ink decreased and has lower resistivity.
The effect of different carbon material on electrical conductivity and mechanical properties of carbon ink was studied in this thesis. Results show that the graphene/ graphite ink has excellent hardness, adhesiveness and lower resistivity of 3.3ⅹ10-1 Ω • cm | en_US |
| DC.subject | 導電碳膠 | zh_TW |
| DC.subject | 固化反應 | zh_TW |
| DC.subject | conductive carbon ink | en_US |
| DC.subject | curing reaction | en_US |
| DC.title | 碳系材料/環氧樹脂之導電碳膠的製備及其性質之研究 | zh_TW |
| dc.language.iso | zh-TW | zh-TW |
| DC.type | 博碩士論文 | zh_TW |
| DC.type | thesis | en_US |
| DC.publisher | National Central University | en_US |