DC 欄位 |
值 |
語言 |
DC.contributor | 土木工程學系 | zh_TW |
DC.creator | 陳聖文 | zh_TW |
DC.creator | Sen-Wen Chen | en_US |
dc.date.accessioned | 2019-11-4T07:39:07Z | |
dc.date.available | 2019-11-4T07:39:07Z | |
dc.date.issued | 2019 | |
dc.identifier.uri | http://ir.lib.ncu.edu.tw:444/thesis/view_etd.asp?URN=106322009 | |
dc.contributor.department | 土木工程學系 | zh_TW |
DC.description | 國立中央大學 | zh_TW |
DC.description | National Central University | en_US |
dc.description.abstract | 本研究針對具有曲線消能器之 A 型隅撐構架耐震性能進行探討,
研究中針對不同尺寸曲線消能器以及應用此消能器之隅撐構架分別
進行試驗以確認其應用性。
另外由曲線消能器之構件試驗結果得知曲線消能器在小位移比
0.38%至 0.56%之間,即進入塑性階段,由此開始消散能量,且在位
移比 7%之內皆不會發生破裂,顯示曲線消能器具有極佳韌性。
且另外由 A 型隅撐構架試驗結果得知,A 型隅撐構架具有適當之
位移放大機制,可有效利用曲線消能器消散能量,此外隅撐系統亦可
降低梁柱接頭之受力,延後梁端降伏之狀況。而構架初始勁度較抗彎
構架高約於 3.77 倍,且消能能力提升為 1.42 至 2.00 倍。由上述結果
可知,A 型隅撐構架可有效提升構架之承載性能。
關鍵字:隅撐構架、A 型隅撐、耐震性能、曲線消能器 | zh_TW |
dc.description.abstract | This study focused on the performance evaluation of A-knee braced
frame. The purpose of this research is to confirm the applicability of A
knee brace to the framed structural design
According to the experimental results, curved damper started to
dissipate energy in early deformation stage and had exhibited ductility to
7% deformation ratio without crack. Experimental results of A-knee braced
frame tests show that deformation ratio of curved damper could be
amplified in the proposed A-knee brace design. Therefore, significant
contribution of energy dissipation from curved damper was validated.
Further comparisons showed that the initial effective stiffness of A-knee
braced frame was 3.77 times of that of the moment resisting frame. The
energy dissipation of the proposed A-knee braced frame was also increased
by 1.42 to 2.00 times. The significant performance improvements validated
the applicability of A-knee braced frame design.
Keywords: Knee braced frames, A-knee brace, Seismic design, Curved | en_US |
DC.subject | 隅撐構架 | zh_TW |
DC.subject | A型隅撐 | zh_TW |
DC.subject | 耐震性能 | zh_TW |
DC.subject | 曲線消能器 | zh_TW |
DC.subject | Knee braced frames | en_US |
DC.subject | A-knee brace | en_US |
DC.subject | Seismic design | en_US |
DC.subject | Curved damper | en_US |
DC.title | A型隅撐鋼構架耐震性能研究 | zh_TW |
dc.language.iso | zh-TW | zh-TW |
DC.type | 博碩士論文 | zh_TW |
DC.type | thesis | en_US |
DC.publisher | National Central University | en_US |