DC 欄位 |
值 |
語言 |
DC.contributor | 機械工程學系 | zh_TW |
DC.creator | 楊智鈞 | zh_TW |
DC.creator | Chih-Jiun Yang | en_US |
dc.date.accessioned | 2020-9-10T07:39:07Z | |
dc.date.available | 2020-9-10T07:39:07Z | |
dc.date.issued | 2020 | |
dc.identifier.uri | http://ir.lib.ncu.edu.tw:444/thesis/view_etd.asp?URN=106323069 | |
dc.contributor.department | 機械工程學系 | zh_TW |
DC.description | 國立中央大學 | zh_TW |
DC.description | National Central University | en_US |
dc.description.abstract | 本論文旨在利用偏心補償演算法,使磁浮軸承控制迴路從轉子幾何中心修正為轉子質量中心,以降低轉子偏心現象以及其現象所造成之影響。
實驗流程為使用磁浮軸承系統對無軸承離心泵之轉子進行懸浮控制,並利用系統鑑別取得轉子位置迴路模型,再利用驅動系統使轉子旋轉後,導入偏心補償演算法。並將導入偏心補償演算法前後之實驗結果分析、比較。 | zh_TW |
dc.description.abstract | The propose of the thesis is using an eccentricity compensation algorithm to modify the rotor position control from geometric center to mass center on the magnetic bearing control loop, so as to reduce the effects by rotor eccentricity.
The process for experiment is to use the magnetic bearing system to maintain the rotor of bearingless centrifugal pump levitating and obtain the mathematical model of rotor position loop through performing system identification for the centrifugal pump. Then using the motor drive system to keep the rotor rotating and applying the eccentricity compensation algorithm. Furthermore, analyze and compare the experiment results of using eccentricity compensation algorithm with unused on the thesis. | en_US |
DC.subject | 磁浮軸承 | zh_TW |
DC.subject | 磁懸浮 | zh_TW |
DC.subject | 永磁同步馬達 | zh_TW |
DC.subject | PID控制器 | zh_TW |
DC.subject | 干擾觀測器 | zh_TW |
DC.subject | 偏心補償 | zh_TW |
DC.subject | 快速傅立葉轉換 | zh_TW |
DC.subject | 通用型陷波濾波器 | zh_TW |
DC.subject | Magnetic Bearing | en_US |
DC.subject | Magnetic Levitation | en_US |
DC.subject | Permanent Magnet Synchronous Motor | en_US |
DC.subject | PID Controller | en_US |
DC.subject | Disturbance Observer | en_US |
DC.subject | Eccentricity Compensation | en_US |
DC.subject | Fast Fourier Transform | en_US |
DC.subject | Generalized Notch Filter | en_US |
DC.title | 無軸承離心泵中心偏移補償方法 | zh_TW |
dc.language.iso | zh-TW | zh-TW |
DC.title | The Compensation Method for Mass Eccentricity of Bearingless Centrifugal Pump | en_US |
DC.type | 博碩士論文 | zh_TW |
DC.type | thesis | en_US |
DC.publisher | National Central University | en_US |