博碩士論文 88236003 完整後設資料紀錄

DC 欄位 語言
DC.contributor光電科學研究所碩士在職專班zh_TW
DC.creator何聰慧zh_TW
DC.creatorTsung-Hui Hoen_US
dc.date.accessioned2002-6-25T07:39:07Z
dc.date.available2002-6-25T07:39:07Z
dc.date.issued2002
dc.identifier.urihttp://ir.lib.ncu.edu.tw:444/thesis/view_etd.asp?URN=88236003
dc.contributor.department光電科學研究所碩士在職專班zh_TW
DC.description國立中央大學zh_TW
DC.descriptionNational Central Universityen_US
dc.description.abstract光學薄膜的鍍製,最迫切的為得到穩定的光學特性,即希望在蒸鍍完成後立即知道薄膜的光學常數。本文研究的主要目的,即在於撰寫計算光學常數的應用程式,供鍍膜工程師們能夠快速的分析。本文採用C + + Builder 5.0程式語言做為程式開發之工具。 本文研究之方法,主要係以光學薄膜穿透率之監控圖為藍圖,以波包之方法所發展而得。本研究具體的提出以三次 Spline 雲形線為基礎的曲線密合之方法並視基板為有限厚度,考慮基板兩側多重的反射與透射之效應,可輕易的得到具相當精確度之膜層折射率與消光係數之波形。zh_TW
dc.description.abstractTo get the correct optical constants of the coated films immediately after coating is very important for coating process . The major purpose of this research is to write a computer program to calculate the optical constants , and the computer program can enable coating engineers to analysis the result of the coating quickly . Here I adopt the program language of C++ Builder 5.0 to develop the computer program of coating. The main way of this research is using the monitoring curve as a database , and then developed from the curve fitting to computer program . The text not only specifies the method on the basis of cubic spline curve fitting , but also regards the substrate as finite , at the same time consider the effect of two-sided of the substrate in which multiple reflection and transmission take place . This program makes it easy to get the precise profile of the refractive index and extinction coefficient of the thin film .en_US
DC.subject光學常數zh_TW
DC.subject包絡法zh_TW
DC.subjectoptical constantsen_US
DC.subjectenvelope methoden_US
DC.title光學薄膜常數之計算zh_TW
dc.language.isozh-TWzh-TW
DC.titleOptical constant calculation by envelope methoden_US
DC.type博碩士論文zh_TW
DC.typethesisen_US
DC.publisherNational Central Universityen_US

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明