博碩士論文 88322079 完整後設資料紀錄

DC 欄位 語言
DC.contributor土木工程研究所zh_TW
DC.creator呂習堯zh_TW
DC.creatorXi-Yao Luen_US
dc.date.accessioned2001-7-12T07:39:07Z
dc.date.available2001-7-12T07:39:07Z
dc.date.issued2001
dc.identifier.urihttp://ir.lib.ncu.edu.tw:444/thesis/view_etd.asp?URN=88322079
dc.contributor.department土木工程研究所zh_TW
DC.description國立中央大學zh_TW
DC.descriptionNational Central Universityen_US
dc.description.abstract下射式洩水閘門是一般堰壩和灌排渠道常使用的水工結構物,當水流經洩水閘門形成邊牆射流,沖擊底床泥沙顆粒,再由懸浮載或底床載方式將顆粒攜離沖刷坑至下游堆積。此對水工結構物下游河床之淘刷,造成水工結構物基礎裸露,危及結構物本身之穩定和安全性。一般下游底床會有護坦和尾檻的保護工設施,以防止底床的淘刷。本研究著重在一固定之流量及閘門開口下,分別比較邊牆射流、邊牆射流護坦保護工及邊牆射流尾檻保護工等三種不同的試驗模型在不同尾水深度時,其沖刷坑的沖刷機制與型態。本文並比較尾檻保護工和護坦保護工下游端之沖刷坑,進一步瞭解保護工與在水流作用下,下游河床之互制作用,以做為最佳保護水工結構物設計之參考。zh_TW
dc.description.abstractWhen flowing throught the sluice gates, such as dams or irrigation channels, wall jets usually cause severe scouring problems at the downstream of those hydraulic structures. The formation and development of the scour hole will influence the stability and safety of structures. Aprons and sills are the common countermeasures for protecting the downstream riverbed. In the condition of homogeneous sand beds by wall jet, three models, which are the wall jet, the wall jet with apron, and the wall jet with end sill, are compared. By analyzing experimental data, a predicitive model is developed, and is used to explore the characteristics of local scour near those structures.en_US
DC.subject尾檻zh_TW
DC.subject 洩水閘門zh_TW
DC.subject 護坦zh_TW
DC.subject 邊牆射流zh_TW
DC.subjectapronen_US
DC.subject sillen_US
DC.subject sluice gateen_US
DC.subject wall jeten_US
DC.title邊牆射流及尾檻對砂質底床之沖刷研究 zh_TW
dc.language.isozh-TWzh-TW
DC.type博碩士論文zh_TW
DC.typethesisen_US
DC.publisherNational Central Universityen_US

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明