博碩士論文 90323103 完整後設資料紀錄

DC 欄位	值	語言
DC.contributor	機械工程學系	zh_TW
DC.creator	陳璟錞	zh_TW
DC.creator	Ching-Chun Chen	en_US
dc.date.accessioned	2003-7-15T07:39:07Z
dc.date.available	2003-7-15T07:39:07Z
dc.date.issued	2003
dc.identifier.uri	http://ir.lib.ncu.edu.tw:444/thesis/view_etd.asp?URN=90323103
dc.contributor.department	機械工程學系	zh_TW
DC.description	國立中央大學	zh_TW
DC.description	National Central University	en_US
dc.description.abstract	公差是對產品精確度的定量描述，從產品的設計到製造與檢驗都必須加以考量，並維持其一貫性。在產品大量且多樣化的需求下，互換性是重要的原則，而公差就是其考慮的重點，尤其在零件裝配時，公差就是影響其裝配程度的最大因素。一般的公差設計是採最壞狀況法，在本次的研究中則是以蒙地卡羅模擬法，針對四孔組裝及雙槽組裝兩種情況，分析位置度公差、尺寸公差及形狀公差對組裝的影響，並透過迴歸分析找出組裝限制式，同時考慮成本模式進行最佳化配置設計，以達到兼具組合性和最低成本的要求，提供設計者在公差設計時的一個參考。此外，將尺寸與幾何公差的資訊，整合在電腦輔助設計的環境中，對零件的三次元量測資料進行公差評估後，藉由得到的公差資訊進行組裝評估。	zh_TW
dc.description.abstract	Tolerance is a quantitative description of the precision in production, it has to be considered when products are designed, manufactured and inspected. The exchangeability is an important principle in mass production, and tolerance is the key point. The general method of tolerance design is worst on worst (WOW) tolerance analysis. In this thesis, Monte Carlo simulation is used to analysis the influence of position, size and form tolerance in two assembly conditions. Finding the limit of assembly by linear regression, and optimize the design considering cost at one time. Providing a better method of tolerance design satisfied assemblability and minimization of cost. In additional, develop a function of assembly evaluation in CAD system.	en_US
DC.subject	公差	zh_TW
DC.subject	組合性	zh_TW
DC.subject	公差成本模式	zh_TW
DC.subject	最壞狀況法	zh_TW
DC.subject	蒙地卡羅模擬	zh_TW
DC.subject	cost-tolerance model	en_US
DC.subject	assemblability	en_US
DC.subject	tolerance	en_US
DC.subject	WOW	en_US
DC.subject	Monte Carlo simulation	en_US
DC.title	組裝模擬與公差配置設計研究	zh_TW
dc.language.iso	zh-TW	zh-TW
DC.title	Study of assembly simulation and tolerance design	en_US
DC.type	博碩士論文	zh_TW
DC.type	thesis	en_US
DC.publisher	National Central University	en_US