| DC 欄位 |
值 |
語言 |
| DC.contributor | 機械工程學系 | zh_TW |
| DC.creator | 劉景隆 | zh_TW |
| DC.creator | Ching-Lung Liu | en_US |
| dc.date.accessioned | 2003-7-14T07:39:07Z | |
| dc.date.available | 2003-7-14T07:39:07Z | |
| dc.date.issued | 2003 | |
| dc.identifier.uri | http://ir.lib.ncu.edu.tw:444/thesis/view_etd.asp?URN=90323116 | |
| dc.contributor.department | 機械工程學系 | zh_TW |
| DC.description | 國立中央大學 | zh_TW |
| DC.description | National Central University | en_US |
| dc.description.abstract | 本篇主要是研究如何將斷層掃瞄的斷面影像轉換為以B-Spline Surface為基礎的立體參數曲面。
在過去的研究中，是運用Marching Cube演算法來將二維序列影像轉換成三維的曲面資料。但轉換出來的曲面，不但會佔用大量的儲存空間，且亦會因為插層的影像不夠密而致使曲面產生階梯化的情形。運用型態幾何法內插出虛構的影像雖然可以降低階梯化的情形，但仍無法完全解決曲面不連續的問題。
以數學函數為基礎的B-Spline Surface不但能節省儲存空間，且因B-Spline的連續性特質而使得所建構出來的曲面不會有階梯化的問題，若配合以型態幾何的膨脹收縮法，將能更正確、平順的重建骨骼曲面。
在重建的過程中本研究使用了兩種方法建立基礎曲線，第一種是找出輪廓曲線的特徵點，藉由影像中的特徵點來還原出原始的輪廓。第二種方法則是運用最小平方法來找出最符合輪廓的B-Spline曲線。在傳統的曲面重建法中，各輪廓之間的對應點關係深深地影響到重建曲面的正確性，錯誤的對應關係將會產生不正確的結果。但以最小平方法重建B-Spline曲面之技術亦能減少因對應錯誤而產生的錯誤。 | zh_TW |
| dc.description.abstract | This thesis is a research about construction of medical series images into 3D model by using B-Spline surface.
In the past research, “Marching-Cube Technique” is usually used to construct the 3D model. But the model consumes lots of storage space and it occurs unsmooth appearance in some cases. Though using “Morphology-based Interpolation” method to calculate fictitious images can improve the result, but it still not smooth enough for medical use. Since B-Spline is a continuous mathematical function, using B-Spline surface to construct 3D model can save lots of storage space and avoid unsmooth problem.
We use two different methods to rebuild B-Spline surface. One is detecting characteristic points in the image, and using these points to build the contour. The other method is using least-square method to build the contour, and merge them to a B-Spline surface.
In the process of merge B-Spline surface, the match points of each contour is very important, irrational match method will bring wrong result. The least-square method can solve this problem very easy. | en_US |
| DC.subject | 型態內插 | zh_TW |
| DC.subject | 雲形曲線 | zh_TW |
| DC.subject | 最小平方法 | zh_TW |
| DC.subject | Morphology-based Interpolation | en_US |
| DC.subject | Marching-cube | en_US |
| DC.subject | least-square | en_US |
| DC.subject | B-Spline | en_US |
| DC.title | 斷層影像之B-Spline 參數曲線與曲面重
建研究 | zh_TW |
| dc.language.iso | zh-TW | zh-TW |
| DC.type | 博碩士論文 | zh_TW |
| DC.type | thesis | en_US |
| DC.publisher | National Central University | en_US |