博碩士論文 91521040 完整後設資料紀錄

DC 欄位 語言
DC.contributor電機工程學系zh_TW
DC.creator劉信忠zh_TW
DC.creatorHsin-Chung Liuen_US
dc.date.accessioned2004-7-13T07:39:07Z
dc.date.available2004-7-13T07:39:07Z
dc.date.issued2004
dc.identifier.urihttp://ir.lib.ncu.edu.tw:444/thesis/view_etd.asp?URN=91521040
dc.contributor.department電機工程學系zh_TW
DC.description國立中央大學zh_TW
DC.descriptionNational Central Universityen_US
dc.description.abstract本論文針對光纖通訊系統中接收端前級元件做相關之研究與製作,包括應用於1.55μm波段之邊耦合PIN光偵測器與次微米MSM光偵測器。 在邊耦合PIN光偵測器方面,我們先利用光學模擬軟體BeampropTM來模擬光在其前端光波導內之傳遞情形,再利用運算軟體MATLAB以透過等效電路方式來模擬高頻的特性,以此決定邊耦合PIN光偵測器的磊晶結構及設計元件,之後請聯亞科技公司成長所設計之結構晶圓,再於本校微光電實驗室之設備製作元件,並利用本實驗室光電量測系統進行量測與分析其特性。 在次微米MSM光偵測器方面,我們利用本校的分子束磊晶系統成長元件結構,並利用微光電實驗室之電子束微影設備製作0.2μm指金屬之MSM光偵測器,並進行量測分析並討論其特性改善之方法。zh_TW
dc.description.abstractIn this thesis, the front end devices of the 1.55 um optical receiver in the fiber communication system have been researched and realized, including the PIN and MSM photodetector. The commercial sofewares BeampropTM and MATLAB are used to simulate the characteristic of the waveguide PIN photodetector. The waveguide PIN photodetector has been developed and its peformance has been analyzed. The 0.2 um finger MSM photodetector are also realized and the bandwidth characteristic has been imporved by its thin finger.en_US
DC.subject波導zh_TW
DC.subject邊耦合zh_TW
DC.subject光偵測器zh_TW
DC.subjectP-I-Nzh_TW
DC.subjectM-S-Mzh_TW
DC.subjectM-S-Men_US
DC.subjectP-I-Nen_US
DC.subjectwaveguideen_US
DC.subjectedge-coupleen_US
DC.subjectphotodetectoren_US
DC.title應用於光通訊1.55um波段P-I-N及M-S-M光偵測器之設計與製作zh_TW
dc.language.isozh-TWzh-TW
DC.titleDesign and fabrication of P-I-N and M-S-M photodetector in the 1.55 um wavelength optical communication applicationen_US
DC.type博碩士論文zh_TW
DC.typethesisen_US
DC.publisherNational Central Universityen_US

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明