| DC 欄位 |
值 |
語言 |
| DC.contributor | 光電科學與工程學系 | zh_TW |
| DC.creator | 林峻楓 | zh_TW |
| DC.creator | JunFeng Lin | en_US |
| dc.date.accessioned | 2010-7-24T07:39:07Z | |
| dc.date.available | 2010-7-24T07:39:07Z | |
| dc.date.issued | 2010 | |
| dc.identifier.uri | http://ir.lib.ncu.edu.tw:444/thesis/view_etd.asp?URN=92236014 | |
| dc.contributor.department | 光電科學與工程學系 | zh_TW |
| DC.description | 國立中央大學 | zh_TW |
| DC.description | National Central University | en_US |
| dc.description.abstract | 以LED作為光源的背光模組，組裝作業時，LED與導光板間存在肉眼幾乎不可見的間隙，而當著間隙增大時背光模組輝度會大幅度下降。本論文提出一新複合稜鏡微結構之LED設計，用以調整LED的發光光型，有效解決背光模組輝度隨著因LED光源與導光板間組裝間隙增大，而大幅度下降的問題。
| zh_TW |
| dc.description.abstract | The backlight with LED as light source, when the assembly operation, the existence gap between LED and light guide plate is almost invisible to the naked eye, and with the increase of gap will decrease backlight brightness sharply. This paper presents a new design of the LED compound prism micro-structure to adjust the LED’s emitting light pattern to resolve the sharp decrease to backlight brightness comes with increase of assembly gap between LED and light guide plate.
| en_US |
| DC.subject | 背光模組 | zh_TW |
| DC.subject | LED光學模型 | zh_TW |
| DC.subject | LED封裝架構 | zh_TW |
| DC.subject | 背光模組光學模型 | zh_TW |
| DC.subject | LED Package Structure | en_US |
| DC.subject | Backlight Optical Model | en_US |
| DC.subject | Backlight module | en_US |
| DC.subject | LED Optical Model | en_US |
| DC.title | 背光模組與新LED封裝結構光學耦合之研究 | zh_TW |
| dc.language.iso | zh-TW | zh-TW |
| DC.title | Study of coupling efficiency of light guide with LED in new package structure. | en_US |
| DC.type | 博碩士論文 | zh_TW |
| DC.type | thesis | en_US |
| DC.publisher | National Central University | en_US |