博碩士論文 93323004 完整後設資料紀錄

DC 欄位	值	語言
DC.contributor	機械工程學系	zh_TW
DC.creator	徐禮彬	zh_TW
DC.creator	Li-Pin Hsu	en_US
dc.date.accessioned	2006-7-20T07:39:07Z
dc.date.available	2006-7-20T07:39:07Z
dc.date.issued	2006
dc.identifier.uri	http://ir.lib.ncu.edu.tw:444/thesis/view_etd.asp?URN=93323004
dc.contributor.department	機械工程學系	zh_TW
DC.description	國立中央大學	zh_TW
DC.description	National Central University	en_US
dc.description.abstract	摘要 本文主要是利用實驗探討板材經非對稱壓延加 工後， 其彎曲的曲率、輥輪壓延力及輥輪扭矩和板 材壓下率的變化情形。非對稱壓延主要是以同徑異 週速為主， 加上入口角度變化及乾摩擦、濕摩擦等 條件進行實驗。 實驗結果發現， 壓延力及扭矩皆與縮減率、入 口角度成正比關係， 且和週速比成反比關係。在濕 摩擦狀態下也有相同的情形， 然在相同縮減率下， 濕摩擦所產生的壓延力及扭矩較乾摩擦小。曲率方 面， 曲率變化主要是隨著壓下率有週期性振盪的波 形。	zh_TW
dc.description.abstract	Summary The paper is a research with experiment to inquire into the variety of curvature, loading, torque and reduction after sheet is prsessed by asymmetrical rolling. The asymmetrical rolling mainly takes asymmetrical rolling as principle to experiment with the variety of entry angular and the conditions of dry, lubrication and etc. In the experiment result, we can find loading and torque are direct proportioned to reduction and entry angular, but they are inverse proportioned to the ratio of the peripheral velocities of the upper roll and the lower roll. There is the same situation under the condition of lubrication, too. However, under the same reduction, loading and torque produced by lubrication are smaller than by dry.In curvature, the variety of it changing with reduction is wave of oscillation of a cycle.	en_US
DC.subject	非對稱	zh_TW
DC.subject	滾壓	zh_TW
DC.subject	切片法	zh_TW
DC.subject	Forward slip	en_US
DC.subject	asymmetrical	en_US
DC.subject	rolling	en_US
DC.title	A1050P鋁材非對稱壓延之實驗研究	zh_TW
dc.language.iso	zh-TW	zh-TW
DC.title	Experimental of asymmetrical cold rolling with A1050P	en_US
DC.type	博碩士論文	zh_TW
DC.type	thesis	en_US
DC.publisher	National Central University	en_US