博碩士論文 945201017 完整後設資料紀錄

DC 欄位 語言
DC.contributor電機工程學系zh_TW
DC.creator江宜倫zh_TW
DC.creatorYi-Lun Chiangen_US
dc.date.accessioned2008-1-1T07:39:07Z
dc.date.available2008-1-1T07:39:07Z
dc.date.issued2008
dc.identifier.urihttp://ir.lib.ncu.edu.tw:444/thesis/view_etd.asp?URN=945201017
dc.contributor.department電機工程學系zh_TW
DC.description國立中央大學zh_TW
DC.descriptionNational Central Universityen_US
dc.description.abstract本論文提出一個新的高階三角積分調變器的架構,用以達成效能提升與節省硬體的效果。與傳統架構相比,本架構使用一迴授機制,使得調變器的等效階數在不增加積分器個數的條件下,能夠往上提升,因此其訊雜比優於傳統架構。此一架構並不需要太多額外的電路與功耗,因此能有效提升其效能性質 (Figure of Merit, FOM)。 本論文並且展現基於此一架構所設計的一個等效兩階類比/數位三角積分調變器電路。該電路可以使用於音頻應用上,並且以可攜帶性為考量。其操作電壓為1.5V~1.2V,適用於電池供應電源。電路本身以全差動交換式電容電路實現。在訊號頻寬為20KHz,超取樣率為64 的情況下,以TSMC 0.18μm製程作模擬,此電路的訊雜比較傳統一階架構高出約20dB。zh_TW
dc.description.abstractA high-order architecture of delta-sigma A/D modulator is proposed in this thesis. The proposed architecture, based on conventional structure and using an extra feedback circuitry, can increase the equivalent order of the modulator. Therefore, the figure of merits (FOM) of the proposed architecture increases effectively without spending too much hardware. Based on the proposed architecture, an equivalent second-order delta-sigma analog-to-digital modulator is designed and presented in the thesis. The designed circuit is aimed for the portable audio application and is operated on a battery power source ranging from 1.2V to 1.5V. This design is implemented with fully differential switch-capacitor circuitry. With a signal bandwidth of 20kHz, an oversampling ration of 64 times, the peak signal-to-noise ratio of the proposed architecture is 20dB superior than the conventional first-order modulator, by using the TSMC 0.18μm CMOS process for the circuit simulation.en_US
DC.subject三角積分zh_TW
DC.subjectdelta-sigmaen_US
DC.title設計具有硬體效益的類比-數位三角積分調變器zh_TW
dc.language.isozh-TWzh-TW
DC.titleDesign of a Hardware-Effective Delta-Sigma A/D Modulatoren_US
DC.type博碩士論文zh_TW
DC.typethesisen_US
DC.publisherNational Central Universityen_US

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明