參考文獻 |
[1] 郭子菱, “MOCVD 設備發展現況與趨勢,” Industrial Economics & Knowledge Center,” pp. 1-7, 2012.
[2] G. Evans and R. Greif, “Effect of Boundary Conditions on the Flow and Heat Transfer in a Rotating Disk Chemical Vapor Deposition Reactor, "Numerical Heat Transfer, Vol. 12, pp. 243-252, 1987.
[3] G. Evans and R. Greif, “A Numerical Model of the Flow and Heat Transfer in a Rotating Disk Chemical Vapor Deposition Reactor,"Transactions of the ASME, Journal of heat transfer, Vol. 109, pp. 928-935, 1987.
[4] I. FOTIADIS, Anthony MKREMER, Donald R. McKENNA and Klavs F. JENSEN, “Complex flow phenomena in vertical MOCVD reactors : effect on deposition uniformity and interface abruptness.", Journal of Crystal. Growth, Vol.85, pp. 154-164, 1987.
[5] A. H. Dilawari and J. SZEKELY, “Computed results for the deposition rates and transport phenomena for an MOCVD system with a conical rotating substrate.", Journal of Crystal Growth, Vol.97, pp. 777-791, 1987.
[6] S. Patnaik and R. A. Brown, “Hydrodynamic dispersion in rotating-disk OMVPE reactors : Numerical simulation and experimental measurements.", Journal of Crystal Growth, Vol. 108, pp. 491-498, 1988.
[7] F. Durst, L. Kadinskii, “Numerical study of transport phenomena in MOCVD reactors using a finite volume multigrid solver. ", Journal of Crystal Growth, Vol. 125, pp. 612-626, 1991.
[8] G. W. Young, S. I. Hariharan, and R. Carnahan, “Flow effects in a vertical CVD Reactor," SIAM Journal on Applied Mathematics, Vol. 52, pp. 1509-1532, 1992.
[9] W. Y. Chung, D. H. Kim, and Y. S. Cho, “Modeling of Cu Thin Film Growth by MOCVD Process in a Vertical Reactor," Journal of Crystal Growth, Vol. 180, pp. 691-697, 1997.
[10] S. Joh and G. H. Evans, “Heat Transfer and Flow Stability in a Rotating Disk/Stagnation Flow Chemical Vapor Deposition Reactor," Numerical Heat Transfer, Part A: Applications, Vol. 31, pp. 867-879, 1997.
[11] D. W. Weyburne and B. S. Ahem, “Design and operating considerations for a water-cooled close-spaced reactant injector in a production scale MOCVD reactor,"Journal of Crystal Growth, Vol. 170, pp. 77-82, 1997.
[12] Theodoros G. Mihopoulos, “Simulation of flow and growth phenomena in a close-spaced reactor"Journal of Crystal Growth, Vol. 195, pp. 725-732, 2000.
[13] A. G. Mathews and J. E. Peterson, “Flow Visualizations And Transient Temperature Measurements In An Axisymmetric Impinging Jet Rapid Thermal Chemical Vapor Deposition Reactor,"Journal of Heat Transfer, Vol. 124, pp. 564-570, 2002.
[14] C. Park, J. Y. Hwang, M. Huang and T. J. Anderson, “Investigation Of An Up Flow Cold-Wall CVD Reactor By Gas Phase Raman Spectroscopy,"Thin Solid Films, Vol. 409, pp. 88-97, 2002.
[15] H. V. Santen, C. R. Kleijn, E. A. Harry and V. D. Akker, “On Turbulent Flow In Cold-Wall CVD Reactor,” Journal of Crystal Growth, Vol. 212, pp. 299-310, 2000.
[16] G. Luo, S. P. Vanka and N. Glumac, “Fluid Flow And Transport Processes In A Large Area Atmospheric Pressure Stagnation Flow CVD Reactor For Deposition Of Thin Films,” International Journal of Heat and Mass Transfer, Vol. 47, pp. 4979-4994, 2004.
[17] B. Mitrovic, A. Gurary, L. Kadinski, “On the flow stability in vertical rotating disc MOCVD reactors under awide range of process parameters,” Journal of Crystal Growth, Vol. 287, pp. 656–663, 2005.
[18] B. Mitrovic, ”A. Parekh, J. Ramer, “Reactor design optimization based on 3D modeling of nitrides deposition in MOCVD vertical rotating disc reactors,” Journal of Crystal Growth, Vol. 289, pp. 708-714, 2006.
[19] B. Mitrovic, Alex Gurary, William Quinn, “Process conditions optimization for maximum deposition rate and uniformity in vertical rotating disc MOCVD reactors based on CFD modeling,” Journal of Crystal, Vol. 303, pp. 323-329, 2007.
[20] ZHONG ShuQuan, “Numerical studies on flow and thermal fields in MOCVD reactor,” Chinese Science Bulletin, Vol. 55, pp. 560-566, 2009.
[21] C. H. Lin, W. T. Cheng, “Effect of embedding a porous medium on the deposition rate in a vertical rotating MOCVD reactor based on CFD modeling,” International Communications in Heat and Mass Transfer, Vol. 36, pp. 680-685, 2009.
[22] 詹少彬, “MOCVD加熱系統研究,” 華中科技大學, 2008.
[23] M. Dauelsberg, C. Martin, H. Protzmann, “Modeling and process design of III-nitride MOVPE at near-atmospheric pressure in close coupled showerhead and planetary reactors,” Journal of Crystal Growth, vol. 298, pp. 418-424, 2007.
[24] D. G. Zhao, J. J. Zhu, D. S. Jiang, “Parasitic reaction and its effect on the growth rate of AlN by metal organic chemical vapor deposition,” Journal of Crystal Growth, vol. 289, pp. 72-75, 2006.
[25] B. Mitrovica, A. Gurarya, L. Kadinski, “On the flow stability in vertical rotating disc MOCVD reactors under a wide range of process parameters,” Journal of Crystal Growth, vol. 287, pp. 656-663, 2006.
[26] Ziba Nami, Ahmet Erbil, Gary S., “Reactor Design Considerations for MOCVD Growth of Thin Films,” Transations on Semiconductor Manufacturing, vol. 10(2), pp. 295-306, 1997.
[27] L. Kadinski, V. Merai and A. Parekh et al. “Computational annlysis of GaN/InGaN deposition in MOCVD vertical rotating disk ractors,” Journal of Crystal Growth,” vol. 261, pp. 175-181, 2004.
[28] B. Mitrovic, A. Parekh, J. Ramer et al. “Reactor design optimization based on 3D modeling of nitrides deposition in MOCVD vertical rotating disc reactors,” Journal of Crystal Growth, vol. 289, pp.708-714, 2006.
[29] H. Tokunaga, H. Tan and Y. Inaishi et al. “Performance of multiwafer reactor GaN MOCVD system,” Journal of Crystal Growth, vol. 221, pp. 616-621, 2000.
[30] H. W. Jackson, J. L. Watkins, S. Chung et al. "Conductive sphere in a radio frequency field: Theory and applications topositioners, heating, and noncontact measurements,” J. Appl. Phys., vol. 79(7), pp. 3370-3384, 1996.
[31] Tomoyuki Murakami, Yoshihiro Okuno, and Hiroyuki Yamasaki., “Performance of rf-assisted magnetohydrodynamics power generator,” Physics of Plasmas, vol. 12, pp. 113503-1~113503-8, 2005.
[32] 熱大成, 金屬有機化合物氣相磊晶基礎及應用, 科學出版社, 2008.
[33] Sampson, R K., Conrad, K A., and Irene, E A., “Simultaneous silicon wafer temperature and oxide film thickness measurement in rapid-thermal processing using ellipsometry,” Journal of the Electrochemical Society, vol. 140, pp. 1734-43, 1993.
[34] Sampson, R.K. and Massoud, H.Z., "Resolution of silicon wafer temperature measurement by in situ ellipsometry in a rapid thermal processor," Journal of the Electrochemical Society, vol. 140, pp. 2673-2678, 1993.
[35] Degertekin, F.L., Pei, J., Khuri-Yakub, B.T. and Saraswat, K.C., “In situ acoustic temperature tomography of semiconductor wafers,” Appl. Phys. Lett., vol. 64(11), pp. 1338-1340, 1994.
[36] Peters, Laura, "The Hottest Topic in RTP," Semiconductor International, pp. 56-62, 1991.
[37] 王鎮雄,朱朝煌,李世榮,劉傳仁,蔡豐欽譯, “ 熱傳遞學,” 高立圖書出版社, 1995.
[38] D. K. Kim, “Particle behavior in a vertical channel with thermal convection in the low Grashof number regime,” Computers & Fluids, vol. 48, pp. 183-191.
[39] 方志烈, “導體照明技術,” 電子工業出版社, 2009.
[40] Zemansky, “Heat and Thermodynamics”, 7th ed., chap 4.
[41] 陳信吉,康淵, " Ansys入門," 金華科技圖書股份有限公司, 2002.
[42] 賴美惠, “快速模面加熱系統設計,” 國立成功大學航空太空工程碩士論文, 2010.
[43] 王勣成, 有限元素法, 清華大學出版社, 2003.
[44] Ran Zuo, “Transport phenomena in radial flow MOCVD reactor with three concentric vertical inlets,” Journal of Crystal Growth, Vol. 293, pp. 498-508, 2006.
[45] H. Schlichting, Boundary-Layer Theory, McGraw Hill, 1979.
[46] ANSYS FLUENT 12.0, user ’ s Guide, 2009.
[47] G. Golan, “Integrated thin film heater-thermocouple systems,” Microelectronics Reliability, Vol. 43, pp. 509-512, 2003.
[48] G. A. Slack, “Non-metallic Crystals With High Thermal Conductivity,” J. Phys. Chem. Solids, vol. 34, pp. 321, 1973.
[49] 汪建民等, 陶瓷技術手冊, 經濟部技術部, 中華民國粉末冶金學會, 中華民國產業發展協進會出版, pp. 781-784, 1994.
[50] S. Bloom, “Band Structures of GaN and AlN,” J. Phys. Chem. Solids, vol. 32, pp. 2027, 1971.
[51] Willian D. Callister, Jr., Materials Science and Engineering An Introduction, 1999.
[52] 李文鴻, “電子迴旋共振化學氣相沉積碳化矽薄膜之低溫成長的研究,” 國立台灣科技大學化學工程技術研究所博士論文, 1994.
[53] Y.-M. Li, B. F. Fieselmann, A. Catalano, Amorphous and crystalline silicon carbide IV, Springer-Verlag, 1992.
[54] 黃振倉, “碳化矽奈米針製備及其形成機制之研究,” 國立清華大學材料科學工程研究所博士論文, 1997.
[55] 林博文, 碳化矽及其他碳化物, 陶瓷技術手冊, pp. 745-776, 1994.
[56] T. Takeuchi, H. Amano, K. Hiramatsu, N. Sawaki, I. Akasaki, J., Crystal Growth, vol. 115, 1991.
[57] Soong C Y, “Thermo-flow structure and epitaxial uniformity in large-scale metalorganic chemical vapor deposition reactors with rotating susceptor and inlet flow control,” JJAP, vol. 37, pp. 5823-5834, 1998. |