參考文獻 |
[1] A.D. J. Larminie, “Fuel cell system explained ”, 2003.
[2] 黃鎮江, 燃料電池, vol. 3, 滄海書局, 2008.
[3] Murray EP, Tsai T, Barnett SA, “A direct-methane fuel cell with aceria-based anode”, Nature, vol. 400, pp. 649-651, 1999.
[4] Chan SH, Ho HK, Tian Y, “Multi-level modeling of SOFC-gas turbinehybrid system”, Int J Hydrogen Energy, vol. 28, pp. 889-900, 2003.
[5] Haile SM, “Fuel cell materials and components”, Acta Marer, vol. 51, pp.5981-6000, 2003.
[6] Z.P. Shao, S.M. Haile, Nature, vol. 431, pp. 170–173, 2004.
[7] W. Zhou, Z.P. Shao, R. Ran, R. Cui, Electrochem. Commun.
[8] T. Ishihara, J.W. Yan, M. Shinagawa, H. Matsumoto, Electrochim. Acta, vol. 52, pp. 1645–1650, 2006.
[9] Shao ZP, Haile SM, “A high-performance cathode for the next generation of solid-oxide fuel cells”, Nature, vol. 431, 170-173, 2004.
[10] Yang L, Zuo CD, Wang SH, Cheng Z, Liu M, “A novel composite cathode for low-temperature SOFCs based on oxide proton conductors”, Adv. Mater, vol. 20, pp. 3280-3283, 2008.
[11] Tan WY, Zhong Q, Miao MS, Qu HX, “H2S Solid oxide fuel cell based on a modified barium cerate perovskite proton conductor”, Ionics, vol. 15, pp. 385-388, 2009.
[12] K.D. Kreuer, Annu. Rev, Mater. Res, vol. 33, pp. 333–339, 2003.
[13] H. Yugami, Y. Shibayama, T. Hattori, M. Ishigame, Solid State Ionics, vol. 79, pp. 171–176, 1995.
[14] J. Guan, E.D. Stephen, B. Uthamalingam, M.L. Liu, Solid State Ionics, 110, pp. 303–310, 1998.
[15] K. D. Kreuer, "Proton-conducting oxides," Annual Review of Materials Research”, vol. 33, pp.333-359, 2003.
[16] N. Bonanos, K.S. Knight, B. Ellis, Solid State Ionics, vol. 79, pp. 161–170, 1995.
[17] J. W. Phair and S. P. S. Badwal, "Review of proton conductors for hydrogen separation," Ionics, vol.12, pp. 103-115, Jul 2006.
[18] H. Iwahara, T. Esaka, H. Uchida, N. Maeda, Solid State Ionics, vol. 34, pp. 359,1981.
[19] H. Uchida, H. Yoshidawa, H. Iwahara, Solid State Ionics, vol. 34, pp. 103, 1989.
[20] X. Qi, Y.S. Lin, “Electrical conduction and hydrogen permeation though mixed proton-electron conduting strorium cerate membranes”, Solid State Ionic, vol. 130, pp. 149-156, 2000.
[21] Chunwen Sun, Ulrich Stimming, “Rwviw: Recent anode advances in solid oxide fuel cells”, Journal of Power Sources, vol. 171, pp. 247–260, 2007.
[22] S. Mclntosh, R.J. Gorte, Chem. Rev., vol. 104, pp. 4845–4865, 2004.
[23] Tao, Z., Bi, L., Zhu, Z., Liu W., “Novel cobalt-free cathode materials BaCexFe1−xO3−δ for proton-conducting solid oxide fuel cells” Journal of Power Sources, vol. 194, No. 2, pp. 801-804, 2009.
[24] H. Inaba and H. Tagawa, Ceria-based solid electrolytes, Solid State Ion., vol. 83, pp. 1-16, 1996.
[25] C.W. Sun, J. Sun, G.L. Xiao, H.R. Zhang, X.P. Qiu, H. Li, L.Q. Chen, J. Phys. Chem. B, vol. 110, pp. 13445–13452, 2006.
[26] N.V. Skorodumova, S.I. Simak, B.I. Lundqvist, I.A. Abrikosov, B.
Johansson, Phys. Rev. Lett., vol. 89, 166601, 2002.
[27] KV Galloway and NM Sammes, “Fuel Cells – Solid Oxide Fuel Cells | Anodes”, Encyclopedia of Electrochemical Power Sources, pp. 17-24, 2009.
[28] N.M. Sammes, B.R. Roy,” FUEL CELLS – SOLID OXIDE FUEL CELLS | Cathodes”, Encyclopedia of Electrochemical Power Sources, pp.25–33, 2009.
[29] E. Ivers-Tiffée, “Electrolytes|Solid :oxygen ions”, Encyclopedia of Electrochemical Power Source, vol. , pp. 181-187, 2009.
[30] M. A. Rosen and D. S. Scott, “Comparative efficiency assessments for a range of hydrogen production processes”, International Journal of Hydrogen Energy, vol. 23, pp. 653-659, Aug 1998.
[31] H. Shiga, K. Shinda, K. Hagiwara, A. Tsutsumi, M. Sakurai, K. Yoshida, and E. Bilgen, “Large-scale hydrogen production from biogas”, International Journal of Hydrogen Energy, vol. 23, pp. 631-640, Aug 1998.
[32] M. Ashokkumar, “An overview on semiconductor particulate systems for photoproduction of hydrogen”, International Journal of Hydrogen Energy, vol. 23, pp. 427-438, Jun 1998.
[33] Y. S. Cheng, M. A. Pena, J. L. Fierro, D. C. W. Hui, and K. L. Yeung, “Performance of alumina, zeolite, palladium, Pd-Ag alloy membranes for hydrogen separation from Towngas mixture”, Journal of Membrane Science, vol. 204, pp. 329-340, Jul 15 2002.
[34] J. W. Phair and S. P. S. Badwal, “Review of proton conductors for hydrogen separation”, Ionics, vol. 12, pp. 103-115, Jul 2006.
[35] S. Adhikari and S. Fernando, “Hydrogen membrane separation Techniques”, Industrial & Engineering Chemistry Research, vol. 45, pp. 875-881, Feb 1 2006.
[36] S. Uemiya, “Brief review of steam reforming using a metal membrane Reactor”, Topics in Catalysis, vol. 29, pp. 79-84, May 2004.
[37] S. Adhikari and S. Fernando, “Hydrogen membrane separation Techniques”, Industrial & Engineering Chemistry Research, vol. 45, pp. 875-881, Feb 1 2006.
[38] S. C. A. Kluiters, “Status review on membrane systems for hydrogen Separation”, 2004.
[39] Nathan W. Ockwig and Tina M. Neno, “Membranes for Hydrogen Separation”, Chem. Rev. , vol. 107, pp. 4078-4110, 2007.
[40] M.S. Islam, “Ionic transport in ABO3 perovskite oxides: a computer modelling tour”, J. Mater. Chem., vol. 10, pp.1027-1038, 2000.
[41] Iwahara, H., “Technological challenges in the application of proton conducting ceramics”, Solid State Ionics, vol. 77, pp. 289-298, 1995.
[42] Matsumoto, H., Takeuchi, K., Iwahara, H., “Electromotive force of H2-D2 gas cell using high-temperature proton conductors”, Solid State Ionics, vol. 125, pp. 377-381, 1999.
[43] Iwahara, H., Esaka, T., Uchida, H., Yamauchi, T., Ogaki, K., “High temperature type protonic conductor based on SrCeO3 and its application to the extraction of hydrogen gas”, Solid State Ionics, vol.18/19, pp. 1003-1007, 1986.
[44] Yuan, W.H., Gu, Y.P., Li, L., “Synthesis and ionic conduction of cation-deficient apatite La9.33-2x/3MxSi6O26 Doped with Mg, Ca, Sr”, Chin. J. Chem. Eng., vol. 16 (3), pp. 488-491, 2008.
[45] Marnellos, G., Sanopoulou, O., Rizou, A., Stoukides, M., “The use of proton conducting solid electrolytes for improved performance of hydro- and dehydrogenation reactors”, Solid State Ionics, vol. 97, pp. 375-383,
1997.
[46] H. Iwahara, T. Esaka, H. Uchida, N. Maeda, “Proton conduction in sintered oxides and its application to steam electrolysis for hydrogen production”, Solid State Ionics, vol.3-4, pp. 359-363, 1981.
[47] H. Uchida, H. Yoshikawa, H. Iwahara, “Formation of protons in SrCeO3-based proton conducting oxides. Part I. gas evolution and absorption in doped SrCeO3 at high temperature”, Solid State Ionics, vol. 34, pp. 103-110, 1989.
[48] T. Hibino, K. Mizutani, T. Yajima, H Iwahara, “Evolution of proton conductivity in SrCeO3, BaCeO3, CaZrO3 and SrZrO3 by Temperature programmed desorption method”, Solid State Ionics, vol. 57, pp. 303-306, 1992.
[49] T. Yajima, H. Suzuki, T. Yogo, H. Iwahara, “Protonic conduction in SrZrO3-based oxides”, Solid State Ionics, vol. 51, pp. 101-107, 1992.
[50] Hibino, T., Mizutani, K., Yajima, T., Iwahara, H., “Characterization of proton in Y-doped SrZrO3 polycrystal by IR spectroscopy”, Solid State Ionics, vol. 58, pp. 85, 1992.
[51] M. Cai, S. Liu, K. Efimov, J.Caro, A. Feldhoff, H.Wang, “Preparation and hydrogen permeation of BaCe0.95Nd0.05O3-δ membranes”, Journal of Membrane Science, vol. 343, pp. 90-96, 2009.
[52] R.J. Phillips, N. Bonanos, F.W. Poulsen, E.O. Ahlgen, “Structure and electrical characterization of SrCe1-xYxOξ”, Solid State Ionics, vol. 125, pp. 389-395, 1999.
[53] Xiaotong Wei, Y.S. Lin, “Protonic and electronic conductivities of terbium doped strontium cerates”, Solid State Ionics, vol. 178, pp. 1804–1810, 2008.
[54] J. W. Phair and R. Donelson, “Developments and design of novel(non-palladium-based) metal membranes for hydrogen separation”,Industrial & Engineering Chemistry Research, vol. 45, pp. 5657-5674, Aug 2 2006.
[55] H.-B. Zhao, G.-X. Xing, G.V. Baron, “Preparation and characterization of palladium-based composite membranes by electroless plating and magnetron sputtering”, Catal. Today, vol. 56, pp. 89, 2000.
[56] K.J. Bryden, J.Y. Ying, “Nanostructured palladium membrane synthesis by magnetron sputtering”, Mater. Sci. Eng. A, vol. 204, pp.140, 1995.
[57] V. Jayaraman, Y.S. Lin, M. Pakala, R.Y. Lin, “Fabrication of ultrathin metallic membranes on ceramic supports by sputter deposition”, J. Membr. Sci., vol. 99, pp. 89, 1995.
[58] S. Tosti, L. Bettinali, S. Castelli, F. Sarto, S. Scaglione, V. Violante, “Sputtered, electroless, and rolled palladium-ceramic membrane”, J. Membr. Sci., vol. 196, pp. 241, 2002.
[59] I.P. Mardilovich, E. Engwall, Y.H. Ma, “Dependence of hydrogen flux on the pore size and plating surface topology of asymmetric Pd-porous stainless steel membrane”, Desalination, vol. 144, pp. 85, 2002.
[60] J. Tong, Y. Matsumura, H. Suda, K. Haraya, “Thin and dense Pd/CeO2/MPSS composite membrane for hydrogen separation and steam reforming of methane”, Sep. Purif. Technol., vol. 46, pp. 1-10, 2005.
[61] G. Xomeritakis, Y.S. Lin, “Fabrication of a thin palladium membrane supported in a porous ceramic substrate by chemical vapor deposition, J. Membr. Sci., vol. 120, pp. 261, 1996.
[62] N. Itoh, T. Akiha, T. Sato, “Preparation of thin palladium composite membrane tube by a CVD technique and its hydrogen permselectivity”, Catal. Today, vol. 104, pp.231, 2005.
[63] G. Xomeritakis, Y.S. Lin, “Fabrication of thin metallic membranes by MOCVD and sputtering”, J. Membr. Sci., vol. 133, pp. 217, 1997.
[64] K.J. Bryden, J.Y. Ying, “Nanostructured palladium-iron membranes for hydrogen separation and membrane hydrogenation reactions”, J. Membr. Sci., vol. 203, pp. 29, 2002.
[65] N. Itoh, N. Tomura, T. Tsuji, M. Hongo, “Deposition of palladium inside straight mesopores of anodic alumina tube and its hydrogen permeability”, Microporous Mesoporous Mater., vol. 39, 2000, pp. 103.
[66] Shin-Kun Ryi, Jong-Soo Park, Sung-Hyun Kim, Sung-Ho Cho, Joo-Seok Park, Dong-Won Kim, “Development of a new porous metal support of metallic Dense membrane for hydrogen separation”, Journal of Membrane Science, vol. 279, pp. 439–445, 2006.
[67] B. McCool, G. Xomeritakis, Y.S. Lin, “Composition control and hydrogen permeation characteristics of sputter deposited palladium–silver membranes”, J. Membr. Sci., vol. 161, pp. 67, 1999.
[68] A. Sanson ., P. Pinasco, E. Roncari, “Influence of pore formers on slurry composition and microstructure of tape cast supporting anodes for SOFCs”, Journal of the European Ceramic Society, vol. 28, pp. 1221-1226, 2008.
[69] Youmin Guo, Ye Lin, Ran Ran, Zongping Shao, “Zirconium doping effect on the performance of BaZryCe0.8−yY0.2O3−ı (0.0≤y≤0.8) proton-conducting for fuel cell applications”, Journal of Power Sources, vol. 193, pp. 400-407,
2009.
[70] ASTM International, 100barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United State.
[71] Standard Test Method for Water Absorption, “Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products”, ASTM C373-88, Reapproved 2006.
[72] Shijing Zhan, Xuefeng Zhu, Baofeng Ji, WeipingWang, Xiaoliang Zhanga, JiboWang, Weishen Yang, Liwu Lin, “Preparation and hydrogen permeation of SrCe0.95Y0.05O3-δ asymmetrical membranes”, Journal of Membrane Science, vol. 340, pp. 241-248, 2009.
[73] Sheng-Wei Lee, Chung-Jen Tseng, Jeng-Kuei Chang, Kan-Rong Lee, Chia-Tzu Chen, I-Ming Hung, Sheng-Long Lee, Jing-Chie Lin, “Synthesis and characterization of Ba0.6Sr0.4Ce0.8-xZrxY0.2O3-δ proton-conducting oxides for use as fuel cell electrolyte”, Journal of Alloys and Compounds , 2013
[74] Wei-Chih, Lee, Chi-Yuen Huang., Liang-Kuo Tsao, Yu-Chun Wu, “Chemical composition and tolerance factor at the morphotropic phase boundary in (Bi0.5Na0.5)TiO3-based piezoelectric ceramics”, Journal of the European Ceramic Society, vol. 29, pp. 1443-1448, 2009.
[75] Xiaotong Wei, Jay Kniep, Y.S. Lin., “Hydrogen permeation through terbium doped strontium cerate membranes enabled by presence of reducing gas in the downstream”, Journal of Membrane Science, vol. 345, pp. 201-206, 2009.
[76] Liang Jie, Lingling, Li Li and Mao Yuan Wenhui, “Protonic and Electronic Conductivities and Hydrogen Permeation of SrCe0.95-xZrxTm0.05O3-δ(0≤x≤0.40) Membrane”, Chinese Journal of Chemical Engineering, vol. 18(3), pp. 506-510, 2010. |