參考文獻 |
﹝1﹞ Dan, M. Frangopol, “Life-Cycle Cost Analysis and Design of Civil
Infrastructure System," American Society of Civil Engineers (ASCE),
pp.1-21 (2001)。
﹝2﹞ Huang, Rong-Yau, Sun, Kuo-Shun and Chen, Jeam-jei, "Construction
Planning for Gang Formwork Reuse Using Simulation, " the 17th
International Symposium on Automation and Robotics in Construction
(ISARC-17), Taiwan, (September 18-20, 2000)。
﹝3﹞ Frangopol, D. M., "Bridge Safty and Reliability," American Society
of Civil Engineers (ASCE),(1999)。
﹝4﹞ 牛荻濤,「混凝土結構耐久性與壽命預測」,中國大陸科學出版社,
(2003)。
﹝5﹞ Frangopol, D.M., Hearn, G. eds., Structural Reliability in Bridge
Engineering: Design, Inspection, Assessment, Rehabilitation and
Management, MaGraw-Hill Book Co., Inc., N ew York, N.Y. (1996)。
﹝6﹞ 陳明正、王仲宇;「腐蝕劣化混凝土橋梁承載能力之檢測與評估」,
國立中央大學土木工程學系博士論文 (2005/09)。
﹝7﹞ AASHTO, Manual for Condition Evaluation and Load and Resistance
Factor Rating (LRFR) of Highway Bridge, American Association of
State Highway and Transportation Officials (2003)。
﹝8﹞ 內政部,「建築物耐震設計規範及解說」,內政部100 年.1 月19
日台內營字第0990810250 號令修正。
﹝9﹞ Julie, A., Fundamentals of Metal Fatigue Analysis, Prentice-Hall, Inc.
New Jersey. (1990)。
﹝10﹞ Oh, B. H., "Fatigue-Life Distribution of Concrete for Various Stress
Levels," and Fracture: Plain and Reinforced Beam", ACI Materials
Journal, Vol. 88, No. 2, pp. 122-128. (1991)。
﹝11﹞ 胡智超、王仲宇、施建志;「鋼筋混凝土梁補強及防蝕技術之開發」
國立中央大學土木工程研究所碩士論文,(2000 年7 月)
﹝12﹞ 陳愛英、陳旭慶;「鋼筋混凝土中鋼筋腐蝕原理的研究」城市道橋
與防洪(東南大學交通學院),2005 年 1 月第1 期。
﹝13﹞ Bentur, A., Steel corrosion in concrete, E & FN Spon, London.(1996)。
﹝14﹞ Jyh-Dong Lin, M.C. Chen, Shu-Ping Chang; “Discussion on the
inspection items of the bridge safety evaluation”, 11th International
Conference on Concrete Engineering and Technology (12th –13th June
2012), Putrajaya, Malaysia。
﹝15﹞ O. Burkan Isgor and A. Ghani Razaqpur; “Modelling steel corrosion
in concrete structures” MATERIALS AND STRUCTURES,Volume
39, Number 3 (2006), 291-302, DOI: 10.1007/s11527-005-9022-7。
﹝16﹞ Papaakis V G, Vayenas C G, Fardis M N, "Physical and chemical
characteristics affecting the durability of concrete, " ACI Materials
Journal. pp.186~196. (1991)。
﹝17﹞ 張譽,蔣利學,「基於碳化機理的混凝土碳化深度實用數學模型」,
工業建築(北京),pp.16~19,(1998)。
﹝18﹞ 和全意登志,押田文雄,「老舊建築物中混凝土碳化與鋼筋腐蝕」,
日本建築協會構造系論文集,pp.1~12 (1989)。
﹝19﹞ Swartz, S. E., "Concrete Fatigue and Fracture: Plain and Reinforced
Beam," Fatigue and Fracture in Steel and Concrete Structures, Madras
India, pp.401-421, (1991)。
﹝20﹞ Shah, S. P. and Swartz, S. E., Fracture Mechanics of Concrete, John
Wiley and Sons, Inc. New York. (1995)。
﹝21﹞ Florida Department of Transportation Central Structures Office, "Test
and Assessment of NDT Methods for Post-Tensioning Systems in
Segmental Balanced Cantilever Concrete Bridges," State of Florida
Department of Transportation (2003)。
﹝22﹞ Highway Agency, SETRA, TRL, LCPC, Post-Tensioned Concrete
Bridges, Thomas Telford Publishing, London (1999)。
﹝23﹞ ACI, "Control of Cracking in Concrete Structures",ACI
committee-224-89 First printing, (May 1990)。
﹝24﹞ Gupta, S., Itoh Y. and Niwa, J. I., "An Object-Oriented Diagnostic
System for Pre-stressed Concrete Bridges," Microcomputers in Civil
Engineering, pp.385-399, Published by Blackwell Publishers, USA
(1994)。
﹝25﹞ 蕭尚岳、吳志興;「新拌及硬固混凝土水溶性氯離子含量檢測之研
究」,屏東科技大學土木工程系(2008 年7 月)。
﹝26﹞ 交通部,「交通技術標準規範公路類公路工程部 公路養護規範」
第五章橋梁之 5.2.2 檢測頻率,交通部頒布(2012 年 2 月)。
﹝27﹞ JCI Committee, "Inspection Technology of Concrete", Japan Concrete
Institute of Fundamental. (2003)。
﹝28﹞ Wang, T. M., "Control of Cracking in Engineering structural", China
Construction Industry Publishing (1999)。
﹝29﹞ ACI, "ACI 318-02 Standard Building Code," ACI Committee (2002)。
﹝30﹞ Mangat, P. S. and Molley, B. T., "Chloride Binding in Concrete
Containing PFA,GBS or Silica Fume under Sea Water Exposure,"
Magazine of Concrete Research, Vol. 47, No. 171, pp. 129-141
(1995)。
﹝31﹞ Mallett, G. P., Repair of Concrete Bridges, Thomas Telford Services
Ltd. (1996)。
﹝32﹞ CNS,「中國國家標準」,土木工程及建築類第18.2.5 條,中華民
國經濟部標準檢驗局 (1999)。
﹝33﹞ 潘思源,「台灣的拆船業」,經濟日報叢書(發行人 王惕吾),民國
63 年10 月10 日出版。
﹝34﹞ 呂學榮,「鋼料之檢驗通則」,CNS2608 國家標準規範(2005/05/17 技
師報) 。
﹝35﹞ 網站:鋼筋化學成分與CNS 的要求
http://www.twce.org.tw/info/%E6%8A%80%E5%B8%AB%E5%A0%
B1/440-3-1.html 。
﹝36﹞ 中國船級社,鋼質海船入級與建造規範修改通報( 2004 版 )。
﹝37﹞ 中國船級社,京杭運河標准型船舶規範( 2004 版)。
﹝38﹞ 陳正誠、黃世建、李宏仁,「台灣熱軋竹節及水淬鋼筋之機械性質
與超額降伏強度係數」,中國土木水利工程學刊,Vol. 12,No.2,
pp. 233-238 (2000) 。
﹝39﹞ 陳正誠、黃世建、李宏仁,2000,「台灣水淬鋼筋在耐震結構之應
用探討」,中華民國建築學會建築學報,第33 期,pp. 119-131。
﹝40﹞ 向志豪等,「水淬鋼筋與加釩鋼筋微觀結構與巨觀行為之研究」,
【101 年全國高職學生實務專題製作競賽暨成果展報告書】國立花
蓮高級農業職業學校土木與建築群(中華民國1 0 1 年3 月8 日)。
﹝41﹞ Robert E. Reed-Hill, Reza Abbaschian; “PHYSICAL METALLURGY
PRINCIPLES”, International Thomson Publishing Company (Asia),
Third Edition,PP19-6,(2003)。
﹝42﹞ 中國土木工程學會混凝土工程設計施工規範解說「土木401-86 規
範」科技圖書股份有限公司台北 P15-1~P15-13(1998)。
﹝43﹞ ACI Committee 318 Building Code Requirement for structural
Concrete (ACI 318-95) and Commentary (ACI 318R-95) American
Concrete Institute, Farmington Hills 369 pp (1995)。
﹝44﹞ 經濟部水利署,「經濟部水利署施工規範」第03210 章,鋼筋第
2.1.2 節 網站:
http://wralaw.wra.gov.tw/wralawgip/cp.jsp?lawId=8a8a852d2002fa8b0
120051855300372( 94/9/28)。
﹝45﹞ 台北市政府工務局,「施工規範暨工料分析整合查詢系統」,章
碼:03210(2.1.1 節) 網址 : 查詢時間
2012/07/17http://pwbems.tcg.gov.tw/TPECS/Query/Query_Constructi
onStandard.aspx?Kind=1。
﹝46﹞ The Center for Advanced Life Cycle Engineering (CALCE) “Material
Hardness, Table of Contents” University of Maryland, University of
Maryland,(2012.2)http://www.calce.umd.edu/TSFA/Hardness_ad_.htm
)。
﹝47﹞ 段向勝,邱小壇等;「鋼材里氏硬度與抗拉強度之間換算關係的試
驗研究」,中國建築科學研究院,北京,No.3, 2003. (ISSN
1002-8528)。
﹝48﹞ 邱小壇,段向勝;「鋼筋強度與里氏硬度之間換算關係的研究及現
場應用」,國家建築工程質量監督中心,北京 (2003)王鉄漢,管小
軍;
﹝49﹞ 「里氏硬度法推定Ⅱ級鋼筋的抗拉強度」,同濟大學材料科學與工
程學院,上海,建築材料學報,Vol.7,No.4,Dec. 2004.。
﹝50﹞ ASME Y14.5-2009 standard,“strength/mechanics of Materials
Menu”. American Society Mechanical Engineers Standards (2009)。
﹝51﹞ 何長慶,「鋼筋材料機理與CNS 規範之要求」,東和鋼鐵公司,
(2000 ),http://tech.ths.com.tw/ths4/defile2.pdf。
﹝52﹞ 陳佳莉,「國內鋼筋產業概況」, 台灣工業 (2006 年 3 月)
﹝53﹞ Lawrence H. Van Vlack, “Elements of Materials Science and
Engineering”Addison Wesley, 6nd, (Feb.1996 )(ISBN
957-9311-50-1)。 |