R410A 冷媒於熱交換器管路系統配置 與性能之實驗研究

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：10

、訪客IP：18.117.196.112

姓名

吳建樟(Jian-Jhang Wu) 查詢紙本館藏

畢業系所

機械工程學系在職專班

論文名稱

R410A 冷媒於熱交換器管路系統配置與性能之實驗研究
(Investigation of Different Exchanger Circuits with R410A Refrigerant)

相關論文

★ 迴轉式壓縮機泵浦吐出口閥片厚度對性能影響之研究	★ 鬆弛時間與動態接觸角對旋塗不穩定的影響
★ 電化學製作針錐微電極之製程研究與分析	★ 蚶線形滑轉板轉子引擎設計與實作
★ 利用視流法分析金屬射出成形脫脂製程中滲透度與毛細壓力之關係	★ 應用離心法實驗探求多孔介質飽和度與毛細力之關係
★ 利用網絡模型數值模擬粉末射出成形製程毛細吸附脫脂機制	★ 轉注成形充填過程之巨微觀流數值模擬
★ 二維熱流效應對電化學加工反求工具形狀之分析	★ 金屬粉末射出成形製程中胚體毛細吸附脫脂之數值模擬與實驗分析
★ 飽和度對金屬射出成形製程中毛細吸附脫脂之影響	★ 轉注成型充填過程巨微觀流交界面之數值模擬
★ 轉注成型充填過程中邊界效應之數值模擬	★ 鈦合金整流板電化學加工技術研發
★ 射出/壓縮轉注成型充填階段中流場特性之分析	★ 脈衝電化學加工過程中氣泡觀測與分析

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

由於現今節能和環保意識的抬頭，而屬於高耗能及環保問題的空調系
統，如何能提升空調系統的性能效率和環保功能的目的，來達成節能、高效
率的目標。
本次實驗主要是使用R410A冷媒做為工作流體，搭配不同的流量和不同
的管路系統配置在鰭管式熱交換器進行性能實驗，在實驗研究中發現R410A
冷媒，於熱交換器中，在管路分流數較多時，由於提升了熱交換器管路系統
溫度分佈之均勻性，使得熱交換器性能也愈好。而在順向流和於逆向流的不
同管路系統配置，R410A冷媒也具有不同的性能表現，實驗結果顯示以五進
五出、逆向流的管路系統配置方式，其性能是最佳的。
藉由實驗研究，來了解R410A冷媒的工作特性，在不同的管路配置方式
時，對於熱交換器的效能都會有不同的影響，希望可以做為空調業界，在
R410A冷媒開發時的設計參考，而設計出高效能、低成本的熱交換器的配置。

摘要(英)

Nowadays, in consequence of the energy shortage and the eco-awareness, it makes
more important to emphasize on how to improve the efficiency and also get the purpose
of eco-awareness for the air conditioning equipment which is high energy consuming
and environmental damaging.
The main purpose of this experiment was taking the R410A refrigerant as mass
flow with different flow rate and circuit arrangement to process the performance
experiment of fin tube heat exchanger.
The result of the experiment turned out that the R410A refrigerant in the heat
exchanger, attributable to the more number of circuits which could average the
temperature of heat exchanger circuit system, the better for the heat exchanger
performance. With different allocation of circuit system in forward flow and counter
flow, there were different performances in the R410A refrigerant, the experiment result
shows that when the circuit system arrange as 5-circuit and counter flow , it would
demonstrate the optimal performance
We could find the operation characteristics of 410A refrigerant from the
experiment results; it would provide different effects for the heat exchanger with
various methods of the circuits. In the future, our long-term goal is to make R410A
refrigerant as an important design reference and also to promote this high efficiency and
low cost material in the field of air-conditioner.

關鍵字(中)

★ R410A
★ 熱交換器
★ 逆向流
★ 順向流

關鍵字(英)

★ R410A
★ Heat Exchanger
★ Counter Flow
★ Forward Flow

論文目次

摘要 ........................................................................................................................ I
Abstract .................................................................................................................. II
表目錄 ................................................................................................................... V
圖目錄 ................................................................................................................. VI
符號說明 ........................................................................................................... VIII
第一章緒論 ........................................................................................................ 1
1-1 前言 .......................................................................................................... 1
1-2 R410A 冷媒 ............................................................................................. 3
1-3 文獻回顧 .................................................................................................. 5
1-4 研究目的與動機 ...................................................................................... 7
第二章理論基礎 ................................................................................................ 15
2-1 熱交換器系統性能分析 ........................................................................ 15
2-1.1 熱交換器之熱傳分析 ................................................................. 15
2-2 熱交換器工作流體分流之理論分析 .................................................. 19
第三章實驗設備與方法 .................................................................................... 26
3-1 實驗設備與量測儀器 ............................................................................ 26
3-1.1 實驗設備簡介 ............................................................................. 26
3-1.2 實驗測量溫度校正 ..................................................................... 31
IV
3-2 實驗方法 ................................................................................................ 32
3-2.1 管路配置系統設計 ..................................................................... 32
3-2.2 實驗性能研究 ............................................................................. 35
3-3 實驗流程 ................................................................................................ 35
第四章結果與討論 ............................................................................................ 46
4-1 R410A 冷媒熱交換器管路配置性能測試結果 .................................. 46
4-2 R410A 冷媒熱交換器管路配置分流測試結果 .................................. 50
第五章結論 ...................................................................................................... 60
5-1 結論 ........................................................................................................ 60
5-2 未來研究方向與建議 ............................................................................ 61
5-2.1 實驗方法展望 ............................................................................. 61
5-2.2 建議 ............................................................................................. 62
參考文獻 .............................................................................................................. 66

參考文獻

1. 經濟部能源局，2012年能源產業技術白皮書，(2012).
2. 蒙特婁議定書-哥本哈根修正案，(1992).
3. 經濟部能源局,2012年非生產性質行業能源查核年報,台灣綠色生產力基
金會，2012)
4. Honeywell,R-410A,Material Safety Data Sheet ,GTRN-000417, (2003).
5. 「R410A 使用於箱型空調機的經驗與成果」，一丞通訊，Vol.18，
pp.1-6(1997).
6. S.M. Sami ,B. Song ,B. Poirier ,“Energy efficiency analysis of a new ternary
HFC alternative”,International Journal of Energy Research , Vol.21,
pp.1071-1079(1997).
7. F. de Monte,“Calculation of thermodynamic properties of R407C and R410A
by the martin–hou equation of State-Part I:Theoretical
Development”,International Journal of Refrigeration, Vol.25,
pp.306-313(2002).
8. W. Chen ,“A comparative study on the performance and environmental
characteristics of R410A and R22 residential air conditioners” , Applied
Thermal Engineering，Vol.28, pp.1-7(2008).
9. M.R. Hogun ,“The development of a low-temperature heat pump grain
dryer”,Ph.D. Thesis ,Purdue University , (1980).
10. A. Bejan ,“General criterion for rating heat-exchanger performance”,
International Journal of Heat and Mass Transfer，Vol.21, pp.655–658(1978).
11. A. Fakheri,“Heat Exchanger Efficiency ”,Journal Hear Transfer，Vol.129,
pp.1268-1276(2006).
67
12. C.C. Wang ,J.Y. Jang ,C.C. Lai ,Y.J. Chang ,“Effect of circuit arrangement
on the performance of air-cooled condensers ”, International Journal of
Refrigeration, Vol.22, pp.275-282(1999).
13. Z.Zhang ,P.G. Jin ,Z.G. Liu ,W.R. Tu ,“Effect of circuit arrangement on the
heat exchange performance of air-cooled condensers” , HV & AC , Vol.32,
pp.61-63(2002).
14. J. Liu , W.J. Wei ,G.L. Ding ,K.J. Wang ,“Numerical simulation and
analysis of performance of fin and tube heat exchanger with complex circuit
arrangement”,Journal of Chemical Industry and Engineering, Vol.56,
pp.47-52(2005).
15. L. Cabezas-Gómez ,H.A. Navarro ,J.M. Saiz-Jabardo ,S.M. Hanriot , C.B.
Maia,“Analysis of a new cross flow heat exchanger flow
arrangement-extension to several rows”, International Journal of Thermal
Sciences, Vol.55, pp.122-132(2012).
16. D. Yashar ,“An optimized design of finned-tube evaporators using the
learnable evolution model”, HVAC & Research , Vol.10, pp.201-211 (2004).
17. Z.Y. Guo ,S.Q. Zhou ,Z.X. Li ,L.G. Chen ,“Theoretical analysis and
experimental confirmation of the uniformity principle of temperature
difference field in heat exchanger”, International Journal of Heat and Mass
Transfer, Vol.45, pp.2119–2127(2002).
18. 王啟川，「不均勻動對熱交換器性能的影響」，冷凍與空調，Vol.31，
(2005) pp.45-54。
19. 王啟川，熱交換器設計，五南出版社, (2007)。
20. L. Cabezas-Gómez ,H.A. Navarro ,J.M. Saiz-Jabardo ,“Thermal
characterization of a cross-flow heat exchanger with a new flow
arrangement” , International Journal of Thermal Sciences，Vol.48,
68
pp.2165–2170(2009).
21. R.K. Shah ,Fundamentals of Heat Exchanger Design ,John Wiley & Sons
Inc, (2003).
22. ASHRAE handbook,“Fundamentals”,Atlanta GA,ASHRAE , (1997).
23. J.M. Calm ,“The next generation of refrigerants-historical
review ,considerations , and outlook”, International Journal of Refrigeration
Vol.31, pp.1123-1133(2008).
24. D. Del Col ,D. Torresin ,A. Cavallini ,“Heat transfer and pressure drop
during condensation of the low GWP refrigerant R1234yf ”,International
Journal of Refrigeration , Vol.33, pp.1307-1318. (2010)

指導教授

洪勵吾(Hourng-Lih Wu)

審核日期

2013-7-22

推文