參考文獻 |
[1] Lighting Research and Development Building Technologies Program, “Getting SSL to market”, Solid-State Lighting Workshop, Phoenix, U.S.A., January 2007.
[2] 劉曜彰和曾美榕,「OLED 照明光源發展現況」,工研院電子報,第10005期,2011年5月。
[3] 林晉聲,「未來照明新星-OLED Lighting-技術趨勢與瓶頸」,顯示器智庫,1-11頁,2011年8月。
[4] W. Brutting, Physics of Organic Semiconductors, 1st edition, Wiley, Germany, May 2006.
[5] W. Brütting and C. Adachi, Physics of Organic Semiconductors, 2nd edition, Wiley, Germany, Oct. 2012.
[6] E. Lee, “Simulation of the thin-film thickness distribution for an OLED thermal evaporation process”, Vacuum, Vol.83, pp.848-852, January 2009.
[7] 葉禮維,「真空鍍膜厚度均勻性的電腦模擬」,國立中央大學,碩士論文,2002年。
[8] 郭源欽,「運用電腦模擬蒸鍍修正板改善膜厚均勻度」,虎尾科技大學,碩士論文,2010年。
[9] J.Y. Koay, et al., “Influence of film thickness on the structural, electrical and photoluminescence properties of vacuum deposited Alq3 thin films on c-silicon substrate”, Thin Solid Films, Vol.517, pp.5298-5300, July 2009.
[10] R. Schmidt, et al., “Control of the thickness distribution of evaporated functional electroceramic NTC thermistor thin films”, Journal of Materials Processing Technology, Vol.199, pp.412-416, April 2008.
[11] 張銀夏,「蒸鍍製程之金屬膜厚分佈與均勻遮板設計研究」,長庚大學,碩士論文,2011年。
[12] Y.J. Lin, et al., “Deposition rate effect of Alq3 thin film growth: A kinetic Monte Carlo study”, Australian Journal of Chemistry, Vol.61, pp.600-609, March 2008.
[13] F.J. Zhang, et al., “Influence of evaporation conditions of Alq3 on the performance of organic light emitting diodes”, Journal of Physics D: Applied Physics, Vol.40, pp.4485-4488, July 2007.
[14] D.S. Jeong, et al., “Advantages of energetic cluster evaporation for organic light emitting devices”, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, Vol.22, pp.539-542, March 2004.
[15] 魏士勛,「利用熱蒸鍍法製備碲化鋅熱電薄膜之研究」,國立聯合大學,碩士論文,2013年。
[16] S. Jun, et al., “A study on the evaporation process with multiple point-sources”, Electronic Materials Letters, Vol.9, pp.7-11, October 2013.
[17] C.C. Lee, et al., “Effect of deposition rate on device performance and lifetime of planar molecule-based organic light-emitting diodes”, Journal of Physics D: Applied Physics, Vol.43, 075102(7pp), February 2010.
[18] L.W. Lai, et al., “Method of forming organic film”, U.S. patent, US8518487 B2, 2013.
[19] F.S. Steinbacher, et al., “Simplified, yellow, organic light emitting diode by co-evaporation of premixed dye molecules”, Organic Electronics, Vol.12, pp.911-915, June 2011.
[20] C.C. Hwang, “In-line manufacturing tool using belt-source evaporation techniques for large-sized OLED devices”, Journal of the Society for Information Display, Vol.16, pp.465-474, March 2008.
[21] Y.S. Tsai, et al., “Performance improvement of flexible organic light-emitting diodes with double hole transport layers by spin-coating and evaporation”, Japanese Journal of Applied Physics, Vol.48, 05213(3pp), May 2009.
[22] C.C. Hwang, et al., “Plane source and in-line deposition system for OLED manufacturing”, SID Symposium Digest Technical Papers, Vol.37, pp.1567-1570, June 2006.
[23] E. Fujimoto, et al., “OLED manufacturing system equipped by planar evaporation source“, SID Symposium Digest Technical Papers, Vol.41, pp.695-698, May 2010.
[24] W.H. Park and T. K. Kim, “Narrow band radiative solutions within a cubical enclosure filled with real gas mixtures", KSM International Journal, Vol.16, No. 2, pp.861-869, June2002.
[25] J. Choi, et al., “Temperature analysis for the point-cell source in the vapor deposition process”, KSME International Journal, Vol.18, pp.1680-1688, September 2004.
[26] N. Junichi, “A deposition source, an apparatus for producing organic EL element” Taiwan patent, TWI409350, 2013.
[27] E. Matsumoto, et al., “Method of organic material vacuum deposition and apparatus therefor”, U.S. patent, US8357241B2, 2013.
[28] F.Y. Sorrell, et al., “A global model for rapid thermal processors”, Semiconductor Manufacturing, IEEE Transactions, Vol.3, pp.183-188, November 1990.
[29] J.P. Zöllner, et al., “New lamp arrangement for rapid thermal processing”, Applied Surface Science, Vol.69, pp.193-197, May 1993.
[30] J. Liu and Y. Zheng, “Design of off-axis two reflecting system for parallelism calibration of two axes”, ICM 2011, pp.40-44, Taksim, Istanbul, September 2011.
[31] C.Y. Tsai, “Design and analysis of reflector for uniform light-emitting diode illuminance”, Journal of the Optical Society of America. A, Vol.30, pp.993-1001, May 2013.
[32] M.H. Andreasson, et al., “Porphyrin doping of Alq3 for electroluminescence”, Current Applied Physics, Vol.8, pp.163-166, March 2008.
[33] P. Pope, et al., “Electroluminescence in organic crystals”, The Journal of Chemical Physics, Vol.38, pp.2042, December 1962.
[34] W. Helfrich and W.G. Schneider, “Recombination radiation in anthracene crystals”, Physical Review Letters, Vol.14, pp.229, February 1965.
[35] D.F. Williams and M. Schadt, “A simple organic electroluminescent diode”, Proceedings of the IEEE, Vol.58, pp.476, March 1970.
[36] C.W. Tang and S.A. VanSlyke, “Organic electroluminescent diodes” Applied Physics Letters, Vol. 51, pp.913, July 1987.
[37] J.H. Burroughes, et al., “Light-emitting diodes based on conjugated polymers”, Nature, Vol.347, pp.539-541, September 1990.
[38] M.M. Lu and P. Ngai, “OLED requirements for solid-state lighting”, Frontline Technology, Information Display 10/10, pp.10-13, 2010.
[39] G. Mueller, Electroluminescence I (Semiconductor and Semimetals) Volume 64, Academic Press, San Diego, October 1999.
[40] J.W. Park, et al., “Large-area OLED lightings and their applications”, Semiconductor Science and Technology, Vol.26, 034002 (9pp), February 2011.
[41] 張軍杰和楊鑄,「全球OLED產業發展現狀及趨勢」,現代顯示,第113期,25-30頁,2010年6月。
[42] P. Matyba, et al., “Graphene and mobile ions: The key to all-plastic, solution-processed light-emitting devices”, ACS Nano, Vol.4, pp.637-642, February 2010.
[43] J. Kim, et al., “Low-temperature synthesis of large-area graphene-based transparent conductive films using surface wave plasma chemical vapor deposition”, Applied Physics Letters, Vol.98, 091502(3pp), March 2011.
[44] T. Kobayashi, et al., “Production of a 100-m-long high-quality graphene transparent conductive film by roll-to-roll chemical vapor deposition and transfer process”, Applied Physics Letters, Vol.102, 023112(4pp), January 2013.
[45] Y. Galagan, et al., “ITO-free flexible organic solar cells with printed current collecting grids”, Solar Energy Materials & Solar Cells, Vol.95, pp.1339–1343, May 2011.
[46] R.R. Søndergaard, et al., “Roll-to-roll fabrication of large area functional organic materials”, Journal of Polymer Science Part b: Polymer Physics, Vol.51, pp.16-34, January 2013.
[47] H.J. van de Wiel, et al., “Roll-to-roll embedded conductive structures integrated into organic photovoltaic devices”, Nanotechnology, Vol.24, pp.484014, November 2013.
[48] J.S. Yu, et al., “Transparent conductive film with printable embedded patterns for organic solar cells”, Solar Energy Materials & Solar Cells, Vol.109, pp.142–147, February 2013.
[49] M.C. Tam, et al., “Surface-plasmon-enhanced photoluminescence from metal-capped Alq3 thin Films”, Applied Physics Letters, Vol.95, 051503(3pp), August 2009.
[50] C.Y. Cho, et al., “Enhanced optical output power of green light-emitting diodes by surface plasmon of gold nanoparticles”, Applied Physics Letters, Vol.98, 051106(3pp), February 2011.
[51] A. Kumar, et al., “Efficiency enhancement of organic light emitting diode via surface energy transfer between exciton and surface plasmon”, Organic Electronics, Vol.13, pp.159-165, January 2012.
[52] J.S. Jung, et al., “Luminescence variation of organic Alq3 nanoparticles on surface of Au nanoparticles and graphene”, Synthetic Metals, Vol.162, pp.1852-1857, December 2012.
[53] S.H. Chen, et al., “Enhanced luminescence efficiency by surface plasmon coupling of Ag nanoparticles in a polymer light-emitting diode”, Optics Express, Vol.19, pp.16843-16850, August 2011.
[54] Y. Xiao, et al., “Surface plasmon-enhanced electroluminescence in organic light-emitting diodes incorporating Au nanoparticles”, Applied Physics Letters, Vol.100, 013308(4pp), January 2012.
[55] S.R. Kim, et al., “Effects of argon and oxygen flow rate on water vapor barrier properties of silicon oxide coatings deposited on polyethylene terephthalate by plasma enhanced chemical vapor deposition”, Thin Solid Films, Vol.518, pp.1929–1934, February 2010.
[56] N. Kim, “Fabrication and characterization of thin-film encapsulation for organic electronics”, School of Mechanical Engineering Georgia Institute of Technology, Ph.D. Thesis, 2009.
[57] A. Kirubanandham and S. Basu, “On characterization of mechanical deformation in flexible electronic structures”, Agilent Technologies, Inc., USA, 5991-1040EN(8pp), August 2012.
[58] B.J. Kim, “Electrical failure and damage analysis of multi-layer metal films on flexible substrate during cyclic bending deformation”, 18th IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA), Incheon, Korea, July 2011.
[59] D.R. Cairns and G.P. Crawford, “Electromechanical properties of transparent conducting substrates for flexible electronic displays”, Proceedings of the IEEE, Vol.93, pp.1451-1458, August 2005.
[60] K. Alzoubi, et al., “Experimental and analytical studies on the high cycle fatigue of thin film metal on PET substrate for flexible electronics applications”, IEEE Transactions on Components, Packaging, and Manufacturing Technology, Vol.1, pp.43-51, January 2011.
[61] H. Chen, et al., “Simulation of the organic thin film thickness distribution for multi-source thermal evaporation process”, Vacuum, Vol.85, pp.448-451, September 2010.
[62] M. Eritt, et al., “OLED manufacturing for large area lighting applications”, Thin Solid Films, Vol.518, pp.3042-3045, March 2010.
[63] T. Gavrilko, et al., “FTIR spectroscopic and STM studies of vacuum deposited aluminium (III) 8-hydroxyquinoline thin films”, Journal of Molecular Structure, Vol.704, pp.163-168, October 2004.
[64] 詹逸民,「高效能有機發光元件製作技術之研究」,國立成功大學,碩士論文,2004年。
[65] 陳金鑫和黃孝文,OLED:有機電激發光材料與元件,五南出版社,2005年。
[66] T. Atsushi, et al., “Evaporation device”, Taiwan patent, TWI321593, 2010.
[67] Harison Toshiba Lighting Corp., “Infared Halogen Heater”, User guide.
[68] Ushio, “Halogen Heater: high efficiency near infrared heating”, User guide.
[69] G. Wyszecki and W.S. Stiles, Color Science: Concept and Methods, Quantitative Data and Formulae, 2nd edition, Wiley, New York, September 1982.
[70] R.S. Berns, Billmeyer and Saltzman′s Principles of Color Technology, 3rd edition, Wiley, New York, March 2000.
[71] L. Stroebel, et al., Basic Photographic Materials and Processes, 2nd edition, Focal Press, New York, March 2000.
[72] M. Planck, "On the law of distribution of energy in the normal spectrum", Annalen der Physik, Vol.4, p.553, 1901.
[73] J.J. Brehm, and W.J. Mullin, Introduction to the Structure of Matter: A Course in Modern Physics, 1st edition, Wiley, New York, January 1989.
[74] J. Stefan, “Über die Beziehung zwischen der Wärmestrahlung und der Temperatur, in: Sitzungsberichte der mathematisch- naturwissenschaftlichen Classe der kaiserlichen Akademie der Wissenschaften”, Bd.79, pp.391-428, 1879.
[75] L. Boltzmann, ”Ableitung des Stefan′schen Gesetzes, betreffend die Abhängigkeit der Wärmestrahlung von der Temperatur aus der electromagnetischen Lichttheorie, in: Annalen der Physik und Chemie”, Bd.22, pp.291-294, 1884.
[76] P. Frank, et al., Fundamentals of Heat and Mass Transfer, 6th edition, Wiley, U.S.A., 2007.
[77] M.J. Turner, et al., “Stiffness and deflection analysis of complex structures”, Journal of the Aeronautical Sciences, Vol.23, pp.805-823, September 1956.
[78] 丁毓峰等,有限元分析完全手冊,電子工業出版社,中國北京,2011年1月。
[79] 許京荊,ANSYS 12.0軟體培訓─熱分析,ANSYS軟件華東地區培訓中心,中國上海,2010年5月。
[80] S. Moaveni, Finite Element Analysis: Theory and Application with ANSYS, 3rd edition, Pearson Education Inc., USA, 2008.
[81] H.W. Jackson, et al., "Conductive sphere in a radio frequency field: Theory and applications to positioners, heating, and noncontact measurements”, Journal of Applied Physics, Vol.79, pp.3370-3384, December 1995.
[82] S.V. Patankar and D.B. Spalding, “A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows”, International Journal of Heat and Mass Transfer, Vol.15, pp.1787-1806, October 1972.
[83] Fluent Inc., Fluent 6.0 Documentation, 2001.
[84] ANSYS, Inc., ANSYS Fluent 12.0 Theory Guide, 2009.
[85] J. Tu, et al., Computational Fluid Dynamics: A Practical Approach, Elsevier Inc., New York, November 2007.
[86] G.K. Batchelor, An Introduction to Fluid Dynamics, Cambridge University Press, Cambridge, 1967.
|