參考文獻 |
[1] A. Lervik, F. Bresme, S. Kjelstrup, D. Bedeaux, and J. Miguel Rubi, ”Heat transfer in protein-water interfaces,” Phys Chem Chem Phys, vol. 12, pp. 1610-7, 2010.
[2] B. Huang, H. Kim, and C. Dass, ”Probing three-dimensional structure of bovine serum albumin by chemical cross-linking and mass spectrometry,” J Am Soc Mass Spectrom, vol. 15, pp. 1237-47, 2004.
[3] D. Mulvihill and M. Donovan, ”Whey proteins and their thermal denaturation-a review,” Irish Journal of Food Science and Technology, pp. 43-75, 1987.
[4] F. Putnam, The Plasma Proteins V3: Structure, Function, and Genetic Control vol. 3: Elsevier, 2012.
[5] K. Aoki, T. Takagi, and H. Terada, ”Serum Albumin,” ed: Kodansha, Tokyo, 1984.
[6] K. A. Majorek, P. J. Porebski, A. Dayal, M. D. Zimmerman, K. Jablonska, A. J. Stewart, et al., ”Structural and immunologic characterization of bovine, horse, and rabbit serum albumins,” Molecular immunology, vol. 52, pp. 174-182, 2012.
[7] K. Dill and D. Shortle, ”Denatured states of proteins,” Annual review of biochemistry, vol. 60, pp. 795-825, 1991.
[8] N. Campbell and J. Reece, ”Biology 7th ed, International edition,” ed: San Fransisco, 2005.
[9] Baba, Tetsuya, and O. Akira, ”Improvement of the laser flash method to reduce uncertainty in thermal diffusivity measurements,” Measurement Science and Technology, vol. 12, p. 2046, 2001.
[10] K.-H. Lim, S.-K. Kim, and M.-K. Chung, ”Improvement of the thermal diffusivity measurement of thin samples by the flash method,” Thermochimica Acta, vol. 494, pp. 71-79, 2009.
[11] J. Blumm, A. Lindemann, and S. Min, ”Thermal characterization of liquids and pastes using the flash technique,” Thermochimica Acta, vol. 455, pp. 26-29, 2007.
[12] J. Guo, G. He, Y. Zhang, B. Zhou, T. Luo, S. Du, et al., ”Thermal Diffusivity Measurement of Diamond Films.pdf,” International Journal of Thermophysics, vol. 21, pp. 479-485, 2000.
[13] H. Lee and R. Taylor, ”Thermophysical properties of carbon/graphite fibers and MOD-3 fiber-reinforced graphite,” Carbon, vol. 13, pp. 521-527, 1975.
[14] S. Shaikh, K. Lafdi, and R. Ponnappan, ”Thermal conductivity improvement in carbon nanoparticle doped PAO oil: An experimental study,” Journal of Applied Physics, vol. 101, p. 064302, 2007.
[15] E. P. Oliveira, D. D. Q. Vilar, M. A. da Conceição Silva, C. K. F. da Silva, and Z. E. da Silva, ”THERMOPHYSICAL PROPERTIES ESTIMATION OF MILK USING,” in 14th Brazilian Congress of Thermal Sciences and Engineering, ed, 2012.
[16] P. Gabbott, ”A practical introduction to differential scanning calorimetry,” Principles and applications of thermal analysis, pp. 1-50, 2008.
[17] M. Kodama, S. Takebayash, S.-i. Kidokoro, and H. Uedaira, ”Thermal Transitions and Stability of Fatty Acid-Containing and Defatted Bovine Serum Albumin (BSA),” Netsu Sokutei, vol. 19, pp. 163-169, 1992.
[18] M. Yamasaki, H. Yano, and K. Aoki, ”Differential scanning calorimetric studies on bovine serum albumin: I. Effects of pH and ionic strength,” International journal of biological macromolecules, vol. 12, pp. 263-268, 1990.
[19] G. Barone, C. Giancola, and A. Verdoliva, ”DSC studies on the denaturation and aggregation of serum albumins,” Thermochimica acta, vol. 199, pp. 197-205, 1992.
[20] P. Ross and A. Shrake, ”Decrease in stability of human albumin with increase in protein concentration,” Journal of Biological Chemistry, vol. 263, pp. 11196-11202, 1988.
[21] A. Michnik, K. Michalik, A. Kluczewska, and Z. Drzazga, ”COMPARATIVEDSC STUDYOFHUMANANDBOVINESERUMALBUMIN,” Journal of thermal analysis and calorimetry, vol. 84, pp. 113-117, 2006.
[22] K. Aoki, K. Hiramatsu, K. Kimura, S. Kaneshina, N. Yoshitoyo, and K. Sato, ”Heat Denaturation of Bovine Serum Albumin. I: Analysis by Acrylamide-gel Electrophoresis (Commemoration Issue Dedicated to Professor Rempei Gotoh On the Occasion of his Retirement),” Bulletin of the Institute for Chemical Research, Kyoto University, vol. 47, pp. 274-282, 1969.
[23] M. R. Rodríguez Niño and J. Rodríguez Patino, ”Effect of the aqueous phase composition on the adsorption of bovine serum albumin to the air-water interface,” Industrial & engineering chemistry research, vol. 41, pp. 1489-1495, 2002.
[24] A. Michnik, ”Thermal stability of bovine serum albumin DSC study,” Journal of Thermal Analysis and Calorimetry, vol. 71, pp. 509-519, 2003.
[25] B. K. Park, N. Yi, J. Park, T. Y. Choi, J. Y. Lee, A. Busnaina, et al., ”Thermal conductivity of bovine serum albumin: A tool to probe denaturation of protein,” Applied Physics Letters, vol. 99, p. 163702, 2011.
[26] ”Differential scanning calorimetric studies on bovine serum albuminI. Effects of pH and ionic strength.”
[27] F. Zhang, M. W. Skoda, R. M. Jacobs, R. A. Martin, C. M. Martin, and F. Schreiber, ”Protein interactions studied by SAXS: effect of ionic strength and protein concentration for BSA in aqueous solutions,” The Journal of Physical Chemistry B, vol. 111, pp. 251-259, 2007.
[28] ”Characterization by Optical Methods of the Heat Denaturation of Bovine.”
[29] S. Baier and D. J. McClements, ”Impact of preferential interactions on thermal stability and gelation of bovine serum albumin in aqueous sucrose solutions,” Journal of agricultural and food chemistry, vol. 19, pp. 2600-2608, 2001.
[30] E. Seyrek, P. L. Dubin, C. Tribet, and E. A. Gamble, ”Ionic strength dependence of protein-polyelectrolyte interactions,” Biomacromolecules, vol. 4, pp. 273-282, 2003.
[31] A. Michnik, K. Michalik, and Z. Drzazga, ”Stability of bovine serum albumin at different pH,” Journal of thermal analysis and calorimetry, vol. 80, pp. 399-406, 2005.
[32] M. Yamasaki, H. Yano, K. Tatsumi, and K. Aoki, ”Differential scanning calorimetric studies on bovine serum albumin IV. Effect of anionic surfactants with various lengths of hydrocarbon chain,” International journal of biological macromolecules, vol. 19, pp. 241-246, 1996.
[33] R. A. Curvale, ”Buffer capacity of bovine serum albumin (BSA),” J. Argent. Chem. Soc, vol. 97, pp. 174-180, 2009.
[34] B. Shweitzer, D. Zanette, and R. Itri, ”Bovine serum albumin (BSA) plays a role in the size of SDS micelle-like aggregates at the saturation binding: the ionic strength effect,” J Colloid Interface Sci, vol. 277, pp. 285-91, 2004.
[35] Y. A. Antonov and I. L. Zhuravleva, ”Effect of protein thermo aggregation on the binding of BSA to gelatin type A,” Int J Biol Macromol, vol. 53, pp. 160-7, 2013.
[36] S. K. Baier and D. J. McClements, ”Impact of sorbitol on the thermostability and heat-induced gelation of bovine serum albumin,” Food Research International, vol. 36, pp. 1081-1087, 2003.
[37] B. K. Park, N. Yi, J. Park, and D. Kim, ”Monitoring protein denaturation using thermal conductivity probe,” Int J Biol Macromol, vol. 52, pp. 353-7, 2013.
[38] P. Tompa, P. Banki, M. Bokor, P. Kamasa, D. Kovacs, G. Lasanda, et al., ”Protein-water and protein-buffer interactions in the aqueous solution of an intrinsically unstructured plant dehydrin: NMR intensity and DSC aspects,” Biophys J, vol. 91, pp. 2243-9, 2006.
[39] H. Larsericsdotter, S. Oscarsson, and J. Buijs, ”Structure, stability, and orientation of BSA adsorbed to silica,” J Colloid Interface Sci, vol. 289, pp. 26-35, 2005.
[40] M. A. Masuelli, ”Study of Bovine Serum Albumin Solubility in Aqueous Solutions by Intrinsic Viscosity Measurements,” Advances in Physical Chemistry, vol. 2013, pp. 1-8, 2013.
[41] T. Chakraborty, I. Chakraborty, S. P. Moulik, and S. Ghosh, ”Physicochemical and conformational studies on BSA-surfactant interaction in aqueous medium,” Langmuir, vol. 25, pp. 3062-3074, 2009.
[42] J. Boye, I. Alli, and A. Ismail, ”Interactions involved in the gelation of bovine serum albumin,” Journal of Agricultural and Food Chemistry, vol. 44, pp. 996-1004, 1996.
[43] K. Dill, D. Alonso, and K. Hutchinson, ”Thermal stabilities of globular proteins,” Biochemistry, vol. 28, pp. 5439-5449, 1989.
[44] M. Yamasaki, H. Yano, and K. Aoki, ”Differential scanning calorimetric studies on bovine serum albumin: II. Effects of neutral salts and urea,” International journal of biological macromolecules, vol. 13, pp. 322-328, 1991.
[45] M. Yamasaki, H. Yano, and K. Aoki, ”Differential scanning calorimetric studies on bovine serum albumin: III. Effect of sodium dodecyl sulphate,” International journal of biological macromolecules, vol. 14, pp. 305-312, 1992.
[46] J. Choi, M. Morrissey, and J. C. Bischof, ”Thermal Processing of Biological Tissue at High Temperatures: Impact of Protein Denaturation and Water Loss on the Thermal Properties of Human and Porcine Liver in the Range 25–80 °C,” Journal of Heat Transfer, vol. 135, p. 061302, 2013.
[47] X. Yu and D. Leitner, ”Vibrational energy transfer and heat conduction in a protein,” The Journal of Physical Chemistry B, vol. 107, pp. 1698-1707, 2003.
[48] K. Nakagawa, A. Hottot, S. Vessot, and J. Andrieu, ”Influence of controlled nucleation by ultrasounds on ice morphology of frozen formulations for pharmaceutical proteins freeze-drying,” Chemical Engineering and Processing: Process Intensification, vol. 45, pp. 783-791, 2006.
[49] N. Yi, B. K. Park, D. Kim, and J. Park, ”Micro-droplet detection and characterization using thermal responses,” Lab Chip, vol. 11, pp. 2378-84, 2011.
[50] N. Yi, D. Kim, and J. Park, ”IN SITU MICRO DROPLET TYPING SYSTEM USING 3ω METHOD,” 14th International Conference on Miniaturized Systems for Chemistry and Life Sciences, 2008.
[51] G. Graziano, F. Catanzano, and G. Barone, ”Prediction of the heat capacity change on thermal denaturation of globular proteins,” Thermochimica acta, vol. 321, pp. 23-31, 1998.
[52] T. Kongraksawech, ”Characterization by optical methods of the heat denaturation of bovine serum albumin (BSA) as affected by protein concentration, pH, ionic strength and sugar concentration,” 2006.
[53] E. Ibanoglu, ”Effect of hydrocolloids on the thermal denaturation of proteins,” Food Chemistry, vol. 90, pp. 621-626, 2005.
[54] A. S. L. Theodore L. Bergman, Frank P. Incropera, David P. DeWitt, ”Fundamentals of heat and mass transfer,” ed: John Wiley & Sons, 2011.
[55] M. O′neill, ”Baseline control for a differential scanning calorimeter,” ed: Google Patents, 1985.
[56] M. O′neill, ”Measurement of Specific Heat Functions by Differential Scanning Calorimetry,” Analytical Chemistry, vol. 38, pp. 1331-1336, 1966.
[57] X. Cao, J. Li, X. Yang, Y. Duan, Y. Liu, and C. Wang, ”Nonisothermal kinetic analysis of the effect of protein concentration on BSA aggregation at high concentration by DSC,” Thermochimica Acta, vol. 467, pp. 99-106, 2008.
[58] ASTM, ”Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry,” 2011.
[59] W. Parker, R. Jenkins, C. Butler, and G. Abbott, ”Flash method of determining thermal diffusivity, heat capacity, and thermal conductivity,” Journal of applied physics, vol. 32, pp. 1679-1684, 1961.
[60] J. McKay and J. Schriempf, ”Corrections for nonuniform surface‐heating errors in flash‐method thermal‐diffusivity measurements,” Journal of Applied Physics, vol. 47, pp. 1668-1671, 1976.
[61] M. Minges, ”Analysis of thermal and electrical energy transport in Poco AXM-5Q1 graphite,” International Journal of Heat and Mass Transfer, vol. 20, pp. 1161-1172, 1977.
[62] M. MICULESCU, G. COŞMELEAŢĂ, M. BRÂNZEI, and F. MICULESCU, ”Thermal Diffusivity of Materials Using Flash Method Applied on CoCr Alloys ” U.P.B. Sci. Bull., vol. 70, 2008
[63] V. Khuu, ”Evaluation of thermal interface materials and the laser flash method,” Doctor of Philosophy, Mechanical Engineering, Digital Repository at the University of Maryland
University of Maryland (College Park, Md.), 2009.
[64] R. Cowan, ”Pulse Method of Measuring Thermal Diffusivity at High Temperatures,” Journal of Applied Physics, vol. 34, p. 926, 1963.
[65] F. Hemberger, H. P. Ebert, and J. Fricke, ”Determination of the Local Thermal Diffusivity of Inhomogeneous Samples by a Modified Laser-Flash Method,” International Journal of Thermophysics, vol. 28, pp. 1509-1521, 2007.
[66] F. Cernuschi, L. Lorenzoni, P. Bianchi, and A. Figari, ”The effects of sample surface treatments on laser flash thermal diffusivity measurements,” Infrared physics & technology, vol. 43, pp. 133-138, 2002.
[67] T. Azumi, ”Novel finite pulse-width correction in flash thermal diffusivity measurement,” Review of Scientific Instruments, vol. 52, p. 1411, 1981.
[68] S. Min, J. Blumm, and A. Lindemann, ”A new laser flash system for measurement of the thermophysical properties,” Thermochimica Acta, vol. 455, pp. 46-49, 2007.
[69] J. Cape and G. Lehman, ”Temperature and Finite Pulse-Time Effects in the Flash Method for Measuring Thermal Diffusivity,” Journal of Applied Physics, vol. 34, p. 1909, 1963.
[70] D. Tang, B. Zhou, H. Cao, and G. He, ”Dynamic thermal expansion under transient laser‐pulse heating,” Applied physics letters, vol. 59, pp. 3113-3114, 1991.
[71] D. Tang, G. He, B. Zhou, and H. Zhang, ”Effects of finite absorption depth and infrared detector nonlinearity on thermal diffusivity measurement of thin films using the flash method,” Review of scientific instruments, vol. 66, pp. 4249-4253, 1995.
[72] A. Graf, M. Arndt, M. Sauer, and G. Gerlach, ”Review of micromachined thermopiles for infrared detection,” Measurement Science and Technology, vol. 18, p. R59, 2007.
[73] G. Kell, ”Density, thermal expansivity, and compressibility of liquid water from 0. deg. to 150. deg.. Correlations and tables for atmospheric pressure and saturation reviewed and expressed on 1968 temperature scale,” Journal of Chemical and Engineering Data, vol. 20, pp. 97-105, 1975.
[74] F. P. Incropera, Introduction to heat transfer: John Wiley & Sons, 2011.
[75] Y. Cengel, M. Boles, and M. Kanoğlu, Thermodynamics: an engineering approach , vol. 5, McGraw-Hill New York, 2011.
[76] J. Fischer, ”Carbon nanotubes: structure and properties,” Carbon nanomaterials, pp. 51-58, 2006.
[77] H. O. Pierson, Handbook of carbon, graphite, diamonds and fullerenes: processing, properties and applications: William Andrew, 1994.
[78] H. Ebadi-Dehaghani and M. Nazempour, ”Thermal conductivity of nanoparticles filled polymers,” Nanotechnology and Nanomaterials:” Smart Nanoparticles Technology”, InTech, pp. 520-538, 2012.
[79] Y. Agari, A. Ueda, Y. Omura, and S. Nagai, ”Thermal diffusivity and conductivity of PMMA/PC blends,” Polymer, vol. 38, pp. 801-807, 1997.
[80] C. T′Joen, Y. Park, Q. Wang, A. Sommers, X. Han, and A. Jacobi, ”A review on polymer heat exchangers for HVAC&R applications,” International Journal of Refrigeration, vol. 32, pp. 763-779, 2009.
[81] M. Hu, D. Yu, and J. Wei, ”Thermal conductivity determination of small polymer samples by differential scanning calorimetry,” Polymer Testing, vol. 26, pp. 333-337, 2007.
[82] B. M. Foley, C. S. Gorham, J. C. Duda, R. Cheaito, C. J. Szwejkowski, C. Constantin, et al., ”Protein Thermal Conductivity Measured in the Solid State Reveals Anharmonic Interactions of Vibrations in a Fractal Structure,” The Journal of Physical Chemistry Letters, vol. 5, pp. 1077-1082, 2014.
[83] A. Hottot, R. Daoussi, and J. Andrieu, ”Thermophysical properties of aqueous and frozen states of BSA/water/Tris systems,” Int J Biol Macromol, vol. 38, pp. 225-31, 2006.
[84] M. Zhang, J. Chen, Z. Che, J. Lu, Z. Zhong, L. Yang, et al., ”Determination of thermal conductivities of biological tissue protein,” in Biomedical Engineering and Informatics (BMEI), 2010 3rd International Conference on, 2010, pp. 1664-1667.
[85] Y. Gu, C.-C. Chen, and Z.-W. Ruan, ”Enzymatic synthesis of conductive polyaniline using linear BSA as the template in the presence of sodium dodecyl sulfate,” Synthetic Metals, vol. 159, pp. 2091-2096, 2009.
[86]_____LadyofHats,”http://en.wikipedia.org/wiki/Protein_structure#mediaviewer/File:Main_protein_structure_levels_en.svg, ”2008
[87] M. John, ”http://youtu.be/SUCgAxI8rhg,”2012
[88]_____METTLER,”http://us.mt.com/us/en/home/products/Laboratory_Analytics_Browse/TA_Family_Browse/DSC/DSC1-new.html,”2014
[89] NETZSCH, LFA 427 - product brochure,2014
[90] J. Bernhardt , H. Pauly,”Partial specific volumes in highly concentrated protein solutions. I. Water-bovine serum albumin and water-bovine hemoglobin,”The Journal of Physical Chemistry, 1975.
|