摘要(英) |
In the process of micro or nano electro mechanical system manufacturing, pattern collapse is widely observed during the cleaning process. By Surface Evolver simulation, the underlying mechanism of pattern collapse is explored. To avoid pattern collapse, the surface tension of the rinse liquid must be reduced. In experiment, different surfactants such as TTAB and Triton X-100 is added to the solution of hydrogen peroxide to reduce its surface tension. For TTAB and Triton X-100, the value of critical micelle concentration (CMC) for the solution of hydrogen peroxide is the same as that for water. Moreover, Triton X-100 is better than TTAB for the solution of hydrogen peroxide due to the achievement of the lower surface tension. Additionally, less Triton X-100 is needed to reach CMC and the side effect come from the interaction between surfactant and pattern can be reduced.
The decomposition of hydrogen peroxide (H2O2) can be affected by the acidity or basicity, temperature, impurity of an aqueous solution. In this study, the simple measuring system is employed to measure the temperature and pH value of an aqueous solution of H2O2. With the help of the heat balance equation, the decomposition rate associated with the stability of H2O2 under different temperature and time can be estimated. As the aqueous solution of copper (II) sulfate (CuSO4) is added, the decomposition of H2O2 is promoted due to the catalysis of copper (II) ion and large amount of heat is released, leading to the increase of the temperature of solution. Simultaneously, the decomposition of H2O2 can also be accelerated by increasing temperature. After a while, both temperature and pH value of the solution will increase significantly due to the rapid decomposition of acidic H2O2. By adding chelating agents such as EDTA and CDTA, the decomposition of H2O2 can be suppressed because of the binding of the metal ion by chelating agents. It is proved that stabilization ability of CDTA is better than that of EDTA, and stabilization ability can be promoted by much larger amount of chelating agent addition. For the aqueous solution of H2O2 and “basic” TMAH, the decomposition rate of H2O2 is accelerated due to the increase of pH value.
|
參考文獻 |
〔1〕 S. J. Klebanoff, Myeloperoxidase-Halide-Hydrogen peroxide Antibacterial System, J. Bacteriol. 95, 2131 (1968).
〔2〕 R. Hage and A. Lienke, Applications of Transition-Metal Catalysts to Textile and Wood-Pulp Bleaching, Angew. Chem. Int. Ed. Engl. 45, 206 (2005).
〔3〕 C. N. Hill, A Vertical Empire: The History of the UK Rocket and Space Programme, 1950–1971, Imperial College Press (2001).
〔4〕 M. Itano, W. Kern, M. Miyashita, and T. Ohmi, Particle removal from silicon wafer surface in wet cleaning process, IEEE Transactions on Semiconductor Manufacturing 6, 258 (1993).
〔5〕 W. Kern, The Evolution of Silicon Wafer Cleaning Technology, J. Electrochem. Soc. 137, 1887 (1990).
〔6〕 W. Kern and D. A. Puotinen, Cleaning solutions based on hydrogen peroxide for use in silicon semiconductor technology, RCA Rev. 31, 187 (1970).
〔7〕 粟常紅, 陳慶民, “仿荷葉表面研究進展”, 化學通報
〔8〕 M. J. Rosen and J. T. Kunjappu, Surfactants and Interfacial Phenomena, John Wiley & Sons, New Jersey (2012).
〔9〕 P. deGennes, F. Brochard-Wyart, and D. Quere, Perles, Gouttes, bulles, perles et ondes, Belin (2002).
〔10〕 C. G. L. Furmidge, Studies at phase interfaces. I. The sliding of liquid drops on solid surfaces and a theory for spray retention, J. Colloid Sci. 17, 309 (1962).
〔11〕 T. Tanaka, M. Morigami, and N. Atoda, Mechanism of Resist Pattern Collapse during Development Process, Jpn. J. Appl. Phys. 32, 6059 (1993).
〔12〕 S. F. Chini and A. Amirfazli, Understanding Pattern Collapse in Photolithography Process Due to Capillary Forces, Langmuir 26, 13707 (2010).
〔13〕 W. C. Schumb, C. N. Satterfield, and R. L. Wentworth, Hydrogen peroxide, ACS Monograph Series, 565, Reinhold, New York (1955)
〔14〕 J. T. Burton and L. L. Campbell, in Proceedings of 1985 International Symposium on Wood and Pulping Chemistry, CPPA, Montreal.
〔15〕 J. L. Colodette, S. Rothenberg, and C. W. Dence, Factors affecting hydrogen peroxide stability in the brightening of mechanical and chemimechanical pulps, J. Pulp Paper Sci. 14, J126 (1988).
〔16〕 J. L. Colodette, S. Rothenberg, and C. W. Dence, Factors affecting hydrogen peroxide stability in the brightening of mechanical and chemimechanical pulps, J. Pulp Paper Sci. 15, J3 (1989).
〔17〕 J. L. Colodette, S. Rothenberg, and C. W. Dence, Factors affecting hydrogen peroxide stability in the brightening of mechanical and chemimechanical pulps. J Pulp Paper Sci. 15, J45 (1989).
〔18〕 R. H. Petrucci, W. S. Harwood, and F. G. Herring, General Chemistry: Principles & Modern Applications, Prentice Hall (2007).
〔19〕 N. N. Greenwood and A. Earnshaw, Chemistry of the Elements, Elsevier Science & Technology Books (1996).
〔20〕 K. Brakke, Exp. Math. 1, 141 (1992).
〔21〕 Z. Wang, C.-C. Chang, S.-J. Hong, Y.-J. Sheng, and H.-K. Tsao, Langmuir 28, 16917 (2012).
〔22〕 Z. Wang, C.-C. Chang, S.-J. Hong, Y.-J. Sheng, and H.-K. Tsao, Phys. Rev. E 87, 062401 (2013).
〔23〕 Z. Wang, C.-C. Chang, S.-J. Hong, Y.-J. Sheng, and H.-K. Tsao, Phys. Rev. E 87, 062401 (2013).
|