參考文獻 |
[1] Muramatsu, S., et al., Effect of hydrogen radical annealing on SiN passive solar cells. Solar Energy Materials and Solar Cells. 65, p. 599-606, 2001.
[2] Lee, Y., et al., Stability of SiNX /SiNX double stack antireflection coating for single crystalline silicon solar cells. Nanoscale Research Letters, 7, p.1-6. 2012.
[3] Dauwe, S., et al., Experimental evidence of parasitic shunting in silicon nitride rear surface passivated solar cells. Progress in photovoltaics, 10, p. 271-278, 2002.
[4] Salemi, S., et al., The effect of defects and their passivation on the density of states of the 4H-silicon-carbide/silicon-dioxide interface. Journal of Applied Physics, 2013.
[5] Chang, L.S., P.L. Gendler, and J.H. Jou, Thermal, mechanical and chemical effects in the degradation of the plasma-deposited alpha-rich passivation layer in a multilayer thin-film device. Journal of Materials Science, 26, p. 1882- 1890,1999.
[6] Jang, J.H. and K.S. Lim, Post hydrogen treatment effects of boron-doped a-SiC:H p-layer of a-Si:H solar cell using a mercury-sensitized photo-chemical vapor deposition method. Japanese journal of applied physics part 1-regular papers short notes & review papers, 36, p. 6230-6236, 1997.
[7] Sepeai S., et al., Surface passivation studies on n+pp+ bifacial solar cell. International Journal of Photoenergy,10, p. 1155- 1162, 2012.
[8] J Del Alamo, J Van Meerbergen, F d′Hoore, J Nijs, High-low junctions for solar cell applications. Solid-State Electronics, 24, p. 533-538, 1980.
[9] Michael P. Godlewski, Cosmo R. Baraona, Henry W, Low-high junction theory applied to solar cells, 10th Photovoltaic Specialists′ Conf, IEEE, 29, p. 131-150, 1990.
[10] Aberle AG, Altermatt PP, Heiser G, Robinson SJ, Wang A, Zhao J, Krumbein U, Green MA. Limiting loss mechanisms in 23% efficient silicon solar cells. Journal of Applied Physics , 77, p. 3491-3507,1995.
[11] B. Vermang, H. Goverde, A. Uruena, A. Lorenz, E. Cornagliotti, A. Rothschild, J. John, J. Poortmans, and R. Mertens, Blistering in ALD Al2O3 passivation layers as rear contacting for local Al BSF Si Solar Cells, Solar Energy Materials and Solar Cells,101, p. 204-209, 2012.
[12] Sheppard, P.A., Handbook of Geophysics. Geophysical journal of the royal astronomical Society, p. 476-478.1960.
[13] S. O. Kasap, Optoelectronics and Photonics Principles and Practices Prentice -Hall, ed. 1.0, 2001.
[14] D. A. Neamen, Semiconductor Physics and devices: basic principles, mcGraw-hill, 2003.
[15] H. Hoppe , N. S. Sariciftci, Organic solar cells, journal of materials research 19, 1924- 1945, 2004.
[16] B. Fischer, Loss analysis of crystalline silicon solar cells using photo- conductance and quantum efficiency measurements, Ph.D Thesis, University of Konstanz , 2003.
[17] Schimpe, R., Theory of reflection at the facet of a semiconductor-laser. Aeu-Archiv Fur elektronik und ubertragungstechnik- International Journal of Electronics and Communications, 46, p. 80-85, 1992.
[18] P. A. Basore, Extended Spectral Analysis of Internal Quantum Efficiency, Proceedings 23rd IEEE PVSC, p.147- 152, 1993.
[19] A. Rohatgi, Z. Chen, P. Doshi, T. Pham, and D. Ruby, High-efficiency silicon solar cells by rapid thermal processing, Appl. Phys. Lett. 65, 2087 (1994).
[20] G. Santana, A. Morales-Acevedo, and L. Hernandez, Gettering effects by aluminum upon the dark and illuminated I-V characteristics of N+-P-P+ silicon solar cells, Sol. Energy mater. sol. Cells, 62, p. 1299-1302 , 2000.
[21] Park S, Bae S, Kim H, Kim S, Do Kim Y, Park H, Kim S, Tark SJ, Son CS, Kim D, Effects of controllable process factors on Al rear surface bumps in Si solar cells, Current Applied Physics,12, p. 17-22, 2012.
[22] J. Krause, R. Woehl, M. Rauer, C. Schmiga, J. Wilde, and D. Biro, Microstructural and electrical properties of different-sized aluminum-alloyed contacts and their layer system on silicon surfaces," Solar Energy Materials and Solar Cells, 95, p. 2151-2160, 2011.
[23] Meemongkolkiat V, Nakayashiki K, KIM D S, et al. Factors limiting the formation of uniform and thick aluminum–back-surface field and its potential. Journal of the Electro- Chemical Society, 153, p. 53-58, 2006.
[24] Zhao J, Wang A, Green MA, High efficiency PERL silicon solar cells on FZ and M CZ substrates Technical digest of the 11th International Photovoltaic Science and Engineering Conference, 65, p. 429- 435, 2001.
[25] Wang A, Zhao J, Green MA, 24% efficient silicon solar cells, Applied physics letters; 2, p. 1477- 1480, 1994.
[26] Blakers AW, Wang A, Milne AM, Zhao J, Green MA. High efficient silicon solar cells. Applied Physics Letters,6 , p. 427-484, 1990.
[27] E. Urrejola, K. Peter, H. Plagwitz, and G. Schubert, Silicon diffusion in aluminum for rear passivated solar cells, Journal of Applied Physics, 98, p. 673- 683, 2011.
[28] H. Plagwitz, , R. Brendel, Analytical model for the diode saturation current of point-contact solar cells, Prog. Photovolt, 14, p.1–12, 2006.
[29] S.M. Yang , J. Plá, Optimization of the back contact in c-Si solar cells, Solid-State Electronics, 53, p. 925–930, 2009.
[30] H. Plagwitz, M. Schaper, J. Schmidt, B. Terheiden, R. Brendel. Analytical model for the optimization of locally contacted solar cells, Photovoltaic Specialists Conference, 31, p.679- 683, 2005.
[31] K. Wijekoon, F. Yan, Y. Zheng, D. Wang, H. Mungekar, L. Zhang, H. Ponnekanti, Optimization of rear local contacts on high efficiency PERC solar cells structures, International Journal of Photo Energy, 2013.
[32] D. Niinobe , H. Morikawa, S. Hiza, T. Sato, S. Matsuno, H. Fujioka, T. Katsura, T. Okamoto, S. Hamamoto, T. Ishihara, S. Arimoto, Large-size multi-crystalline silicon solar cells with honeycomb textured surface and point-contacted rear to ward industrial production, Solar energy materials and solar Cells, 95, p. 49-52, 2011.
[33] J. Müller, K. Bothe, S. Gatz, F. Haase, C. Mader, and R. Brendel, Recombination at laser-processed local base contacts by dynamic infrared lifetime mapping, Journal of Applied Physics, 108,p. 1- 6, 2010
[34] S. Gatz, K. Bothe, J. Müller, T. Dullweber, R. Brendel, Analysis of local Al-doped back surface fields for high efficiency screen-printed solar cells, Energy procedia, 8, p. 318-323, 2011.
[35] M. Moors, K. Baert, T. Caremans, F. Duerinckx, A. Cacciato, J. Szlufcik, Industrial PERL-type solar cells exceeding 19% with screen-printed contacts and homogeneous emitter, Solar energy materials and solar cells, 106, p. 84–88, 2012.
[36] N. Balaji, C. Park, Y. Lee, S. Jung, J. Yi, Rear-side passivation characteristics of Si-rich SiNx for various Local Back Contact solar cells, Vacuum , 96 , p. 69 -72, 2013.
[37] M. wolf, H. Rauschenbach, advanced energy conversion, 3, p. 455-479, 1963.
[38] A. B. Sproul, M. A. Green, and A. W. Stephens, Accurate determination of minority carrier- and lattice scattering-mobility in silicon from photo-conductance decay, J. Appl. Phys 72, p. 4161-4171, 1992.
[39] A. G. Aberle, Crystalline silicon solar cells: advanced surface passivation and analysis, University of New South Wales, Sydney NSW 2052, 1999.
[40] J. P. Colinge and C. A. Colinge, Physics of semiconductor devices, Kluwer academic publishers, 2002.
[41] S. M. Sze, and K. K. Ng, Physics of semiconductor devices, John Wiley & Sons, Inc., Hoboken, NJ, USA. 2006.
[42] M. A. Green, Solar cells: Operating principles, technology, and system applications, Englewood Cliffs, NJ, Prentice-hall, Inc. 1982.
[43] M. S. Tyagi and R. V. Overstraeten, Minority carrier recombination in heavily doped silicon, Solid-St.Electron. 26, p.577- 597 , 1983.
[44] M. J. Kerr and A. Cuevas, General parameterization of Auger recombination in crystalline silicon, J. Appl. Phys. 91,p. 97-104 , 2002.
[45] W. Shockley and W. Read, Statistics of the Recombination of holes and electrons, Phys. Rev. 87, p.835- 842 , 1952.
[46] R. Hall, Electron-Hole Recombination in Germanium, Phys. Rev. 87, p. 387-387, 1952.
[47] M. A. Green, High Efficiency Silicon Solar Cells, Trans tech publications , p. 427-484, 1990.
[48] A. Luque and S. Hegedus, Handbook of photovoltaic science and engineering, John Wiley & Sons Inc, 2003.
[49] A. R. Beattie and P. T. Landsberg, Auger effect in Semiconductors, Proc. R. Soc. 249, p. 16- 20, 1959.
[50] J. Dziewior and W. Schmid, Auger coefficients for highly doped and highly excited silicon, Appl. Phys. Lett. 31, p. 346-348, 1977.
[51] J. Schmidt, A. Merkle, R. Brendel, B. Hoex, M.C.M. van de Sanden, and W.M.M. Kessels, Surface passivation of high-efficiency silicon solar cells by atomic-layer-deposited Al2O3, Prog. Photovolt. 16, p. 461- 466, 2008.
[52] S. Gatz, K. Bothe, J. Müller, T. Dullweber, R. Brendel, Analysis of local Al-doped back surface fields for high efficiency screen-printed solar cells, Energy Procedia,8, p. 318- 323, 2011.
[53] J. Mandelkorn, J. H. Lamneck, Jr., Simplified fabrication of back surface electric field silicon cells and novel characteristics of such cells, in Proc. 9th IEEE Photovoltaic Spec. Conf., IEEE, New York, 66,1972.
[54] M. Wolf, Drift fields in photovoltaic solar energy converter cells, in Proc. Of the IEEE 51, 674-693, 1963.
[55] P. L. Lölgen, Surface and volume recombination in silicon solar cells, PhD Thesis, Universiteit Utrecht,1995.
[56] J. del Alamo, J. Eguren, and A. Luque, Operating limits of Al-alloyed high-low junctions for BSF solar cells, Solid-St. Electron. 24, p.415- 420,1981.
[57] J. Mandelkorn and J. H. Lamneck Jr., A new electric field effect in silicon solar cells, J. Appl. Phys. 44, p. 4785-4790, 1973.
[58] J. Mandelkorn, J. H. Lamneck, Jr., Advances in the theory and application of BSF cells, in Proc. of 11th Photovoltaic Specialists Conference,5, p.6- 8, 1975.
[59] H.B. Xu, R.J. Hong, B. Ai, L. Zhuang, H. Shen , Application of phosphorus diffusion gettering process on upgraded metallurgical grade Si wafers and solar cells, Applied Energy 87, p. 3425– 3430, 2010.
[60] SM Joshi, UM Gösele, TY Tan, Improvement of minority carrier diffusion length in Si by Al gettering, J. Appl. Phys. 77 ,p. 3853-3863, 1995.
[61] J.L. Murray,A. J. McAllster, The Al–Si(Aluminum–silicon)system, Bull. Alloy Phase Diagrams,1, p. 74–84, 1984.
[62] J. Delalamo, J. Eguren, A. Luque, Operating Limits of al-alloyed high-low junctions for bsf solar cells. Solid-State Electrics, 24. pp. 415- 420, 1981.
[63] F.Huster, Investigation of the alloying process of screen printed aluminum pastes for the BSF formation on silicon solar cells, Proceedings of the 20th European Photovoltaic Solar Energy Conference,, p. 1466–1469, 2005.
[64] F.S. Grasso, L. Gautero, Jochen Rentsch, Ralf Preu, R. Lanzafame. Characterisation of location al-bsf formation for PERC solar cell structure, 25th European photovoltaic Solar Energy Conference, p.371- 374, 2010.
[65] K. D-Veress1, J. R. Dutcher and J. A. Forrest, Dynamics and Pattern Formation in Thin Polymer Films, physics in Canada, 2003.
[66] S. Herminghaus, K. Jacobs, K. R. Mecke, Thin liquid polymer films rupture via defects, Langmuir, Vol. 14, No. 4, 1998.
[67] C. Neto, K. Jacobs, Dynamics of hole growth in dewetting polystyrene films. Physica, 339, p. 66 – 71, 2004.
[68] J. Y. Song, S. Park, Y. D. Kim, M. G. Kang, S. J. Tark, S. Kwon, S. Y, and D. Kim, Aluminum fire-through with different types of the rear passivation layers in crystalline Silicon Solar Cells, Met. Mater. Int, 18, p. 699-703, (2012).
|