參考文獻 |
[1] C. W. Tang and S. A. VanSlyke, “Organic electroluminescent diodes,” Appl. Phys. Lett., vol. 51, p. 913, 1987.
[2] J. H. Burroughs, D. D. C. Bradley, A. R. Brown, R. N. Marks, K. M. Kay, R. H. Friend, P. L. Burn and A. B. Holmes, “Light-emitting diodes based on conjugated polymers,” Nature, vol. 347, p. 539, 1990.
[3] K. Saxenaa, D. S. Mehtab, V. K. Raia, R. Srivastavaa, G. Chauhana, M. N. Kam., “Implementation of anti-reflection coating to enhance light out-coupling in organic light-emitting devices,” J. of Lumin., vol. 128, p. 525, 2008.
[4] B. J. Matterson, J. M. Lupton, A. F. Safonov, M. G. Salt, W. L. Barnes ans D. W. Samuel, “Increased efficiency and controlled light output from a microstructured light-emitting diode,” Adv. Mater., vol. 13, p. 123, 2001.
[5] J. Wang, C. Wang and Y. Jiang, “To enhance light extraction for organic light-emitting diodes by body modification of substrate,” Int. J. Photoenergy, vol. 2013, p. 649564, 2014.
[6] Q. D. Qu, L. H. Xu, W. Y. Zhang, Y. Q. Li, Y. B. Zhang, X. D. Zhao, J. D. Chen and J. X. Tang, “Light outcoupling enhanced flexible organic light-emitting diodes,” Opt. Express, vol. 24, p. A674, 2016.
[7] J. J. Shiang and A. R. Duggal, “Application of radiative transport theory to light extraction from organic light emitting diodes,” J. Appl. Phys., vol. 95, p. 2880, 2004.
[8] Y. S. Tyan, J. D. Shore, G. Farruggia and T. R. Cushman, “Broadband-emitting microcavity-OLED device,” Proc. SID’05, Boston, Massachusetts, USA, p.142, 2005.
[9] C. L. Mulder, K. Celebi, K. M. Milaninia, and M. A. Baldo, “Saturated and efficient blue phosphorescent organic light emitting devices with Lambertian angular emission,” Appl. Phys. Lett., vol. 90, p. 211109, 2007.
[10] C. F. Madigan, M. H. Lu and J. C. Sturm, “Improvement of output coupling efficiency of organic light-emitting diodes by backside substrate modification,” Appl. Phys. Lett., vol. 76, p. 1650, 2000.
[11] H. Peng, Y. L. Ho, X. J. Yu, M. Wong and H. S. Kwok, “Coupling efficiency enhancement in organic light emitting devices using microlens array theory and experiment,” IEEE-OSA J. Display Tech., vol. 2, p. 278, 2005.
[12] S. H. Eom, E. Wrzesniewski, J. Xue, “Close-packed hemispherical microlens arrays for light extraction enhancement in organic light-emitting devices,” Org. Electron. vol. 12, p. 472, 2011.
[13] F. Galeotti, W. Mróz, G. Scavia and C. Botta, “Microlens arrays for light extraction enhancement in organic light-emitting diodes: A facile approach,” Org. Electron., vol. 14, p. 212, 2013.
[14] J. Y. Kim, C. W. Joo, J. Lee, J. C. Woo, J. Y. Oh, N. S. Baek, H. Y. Chu and J. I. Lee, “Save energy on OLED lighting by simple yet powerful technique,” RSC Adv., vol. 5, p. 8415, 2015.
[15] T. W. Koh, J. A. Spechler, K. M. Lee, C. B. Arnold and B. P. Rand, “Enhanced outcoupling in organic light-emitting diodes via a high-index contrast scattering layer,” ACS Photon., vol. 2, p. 1366, 2015.
[16] M. C. Suh, B. Pyo, B. W. Lim and N. S. Kim, “Preparation of randomly distributed micro-lens arrays fabricated from porous polymer film and their application as a light extraction component,” Org. Electron., vol. 38, p. 316, 2016.
[17] Y. J. Wang, J. G. Lu and H. P. D. Shieh, “Efficiency enhancement of organic light-emitting diodes on flexible substrate with patterned inverted conical structure,” IEEE Photon. J., vol. 8, p. 1600108, 2016.
[18] L. Ding, L. W. Wang, L. Zhou and F. H. Zhang, “Out-coupling membrane for large-size organic light-emitting panels with high efficiency and improved uniformity,” Appl. Surf. Sci., vol. 389, p. 990, 2016.
[19] F. Dumur, S. Reculusa, M. Mruczkiewicz, M. Perrin, L. Vignau and S. Fasquel, “Multilayer Langmuir-Blodgett films as diffractive external 3D photonic crystal in blue OLEDs,” Opt. Express, vol. 24, p. 27184, 2016.
[20] G. Tan, J. H. Lee, Y. H. Lan, M. K. Wei, L. H. Peng, I. C. Cheng and S. T. Wu, “Broadband antireflection film with moth-eye-like structure for flexible display applications,” Optica, vol. 4, p. 678, 2017.
[21] W. H. Koo, S. M. Jeong, F. Araoka, K. Ishikawa, S. Nishimura, T. Toyooka and H. Takezoe, “Light extraction from organic light-emitting diodes enhanced by spontaneously formed buckles,” Nat. Photon., vol. 4, p. 222, 2010.
[22] Kumar, R. Srivastava, M. N. Kamalasanan and D. S. Mehta, “Enhancement of light extraction efficiency of organic light emitting diodes using nanostructured indium tin oxide,” Opt. Lett., vol. 37, p. 575, 2012.
[23] S. Choi, S. M. Lee, M. S. Lim, K. C. Choi, D. Kim, D. Y. Jeon, Y. Y. and O. O. Park, “Improved light extraction efficiency in organic light emitting diodes with a perforated WO3 hole injection layer fabricated by use of colloidal lithography,” Opt. Express, vol. 20, p. A309, 2012.
[24] S. Jeon, J. H. Lee, J. H. Jeong, Y. S. Song, C. K. Moon, J. J. Kim and J. R. Youn, “Vacuum nanohole array embedded phosphorescent organic light emitting diodes”, Sci. Rep., vol. 5, p. 8685, 2015.
[25] C. W. Joo, J. W. Shin, J. Moon, J. W. Huh, D. H. Cho, J. Lee, S. K. Park, N. S. Cho, J. H. Han, H. Y. Chu and J. I. Lee, “Highly efficient white transparent organic light emitting diodes with nano-structured substrate,” Org. Electron., vol. 29, p. 72, 2016.
[26] T. B. Lim, K. H. Cho, Y. H. Kim and Y. C. Jeong, “Enhanced light extraction efficiency of OLEDs with quasiperiodic diffraction grating layer,” Opt. Express, vol. 24, p. 17950, 2016.
[27] Y. Zhao, F. Yun, Y. Huang, Z. Wu, Y. Li, B. Jiao, L. Feng, S. Li, W. Ding and Y. Zhang, “Efficiency roll-off suppression in organic light-emitting diodes using size-tunable bimetallic bowtie nanoantennas at high current densities,” Appl. Phys. Lett., vol. 109, p. 013303, 2016.
[28] S. Yuan, Y. Hao, Y. Miao, Q. Sun, Z. Li, Y. Cui, H. Wang and B. Xu, “Enhanced light out-coupling efficiency and reduced efficiency roll-off in phosphorescent OLEDs with a spontaneously distributed embossed structure formed by a spin-coating method,” RSC Adv., vol. 7, p. 43987, 2017.
[29] L. Wang, Y. Luo, X. Feng, Y. Pei, B. Lu and S. Cheng, “Efficiency enhancement of flexible OLEDs by using nano-corrugated substrates and conformal Ag transparent anodes,” AIP Adv., vol. 8, p. 055030, 2018.
[30] D. M. Chapin, C. S. Fuller and G. L. Pearson, “A new silicon p‐n junction photocell for converting solar radiation into electrical power,” J. Appl. Phys., vol. 25, p. 676, 1954.
[31] K. Bothe and J. Schmidt, “Electronically activated boron-oxygen-related recombination centers in crystalline silicon,” J. Appl. Phys., vol. 99, p. 013701, 2006.
[32] A. Wang, J. Zhao, and M. A. Green, “24% efficient silicon solar cells,” Appl. Phys. Lett., vol. 57, p. 602, 1990.
[33] M. Emziane, K. Durose, D. P. Halliday, A. Bosio and N. Romeo, “Role of substrate and transparent conducting oxide in impurity evolvement in polycrystalline thin-film devices,” Appl. Phys. Lett., vol. 87, p. 251913, 2005.
[34] T. Buonassisi et al, “Impact of metal silicide precipitate dissolution during rapid thermal processing of multicrystalline silicon solar cells,” Appl. Phys. Lett., vol. 87, p. 121918, 2005.
[35] U. Dutta, P. Chatterjee, S. Tchakarov, M. Uszpolewicz and P. Roca i Cabarrocas, “Metastable defect migration under high carrier injection in hydrogenated amorphous silicon p-i-n solar cells.” J. Appl. Phys., vol. 98, p. 044511, 2005.
[36] S. Y. Myong, K. S. Lim and J. M. Pears, “Double amorphous silicon-carbide p-layer structures producing highly stabilized pin-type protocrystalline silicon multilayer solar cells,” Appl. Phys. Lett., vol. 87, p. 193509, 2005.
[37] E. L. Williams, G. E. Jabbour, Q. Wang, S. E. Shaheen, D. S. Ginley and E. A. Schiff, “Conducting polymer and hydrogenated amorphous silicon hybrid solar cells,” Appl. Phys. Lett., vol. 87, p. 223504, 2005.
[38] D. Shvydka, J. Drayton, A. D. Compaan and V. G. Karpov, “Piezo-effect and physics of CdS-based thin-film photovoltaics,” Appl. Phys. Lett., vol. 87, p. 123505, 2005.
[39] F. H. Seymour, V. Kaydanov, T. R. Ohno and D. Albin, “Cu and CdCl2 influence on defects detected in CdTe solar cells with admittance spectroscopy,” Appl. Phys. Lett., vol. 87, p. 153507, 2005.
[40] J. A. M. AbuShama, S. W. Johnston, R. S. Crandall and R. Noufi, “Meyer-Neldel rule and the influence of entropy on capture cross-section determination in Cu (In,Ga) Se2 ,” Appl. Phys. Lett., vol. 87, p. 123502, 2005.
[41] B. O′Regan and M. Graetzel, “A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films,” Nature, vol. 353, p. 737, 1991.
[42] W. U. Huynh, J. J. Dittmer, N. Teclemariam, D. J. Milliron, A. P. Alivisatos and K. W. J. Barnham, “Charge transport in hybrid nanorod-polymer composite photovoltaic cells,” Phys. Rev. B, vol. 67, p. 115326, 2003.
[43] T. S. Fisher and D. G. Walker, “Thermal and electrical energy transport and conversion in nanoscale electron field emission processes,” J. Heat Transfer, vol. 24, p. 954, 2002.
[44] A. Kojima, K. Teshima, Y. Shirai, T. Miyasaka, “Organometal halide perovskites as visible-light sensitizers for photovoltaic cells,” J. Am. Chem. Soc., vol. 131, p. 6050, 2009.
[45] J. H. Im, C. R. Lee, J. W. Lee, S. W. Park and N. G. Park, “6.5% efficient perovskite quantum-dot-sensitized solar cell”, Nanoscale, vol. 3, p. 4088, 2011.
[46] H. S. Kim, C. R. Lee, J. H. Im, K. B. Lee, T. Moehl, A. Marchioro, S. J. Moon, R. Humphry-Baker, J. H. Yum, J. E. Moser, M. Grätzel and N. G. Park, “Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%,” Sci. Rep., vol. 2, p. 591, 2012.
[47] M. Liu, M. B. Jonhston and H. J. Snaith, “Efficient planar heterojunction perovskite solar cells by vapour deposition,” Nature, vol. 501, p. 395, 2013.
[48] Y. Zhao and K. Zhu, “Efficient planar perovskite solar cells based on 1.8 eV band gap CH3NH3PbI2Br nanosheets via thermal decomposition,” J. Am. Chem. Soc., vol. 136, p.12241, 2014.
[49] M. J. Carnie, C. Charbonneau, M. L. Davides, J. Troughton, T. M. Watson, K. Wojciechowski, H. Snaith and D. A. Worsley, “A one-step low temperature processing route for organolead halide perovskite solar cells,” Chem. Commun., vol. 49, p. 7893, 2013.
[50] Y. Zhao and K. Zhu, “CH3NH3Cl-Assisted one-step solution growth of CH3NH3PbI3-structure, charge-carrier dynamics, and photovoltaic properties of perovskite solar cells,” J. Phys. Chem. C, vol. 118, p. 9412, 2014.
[51] D. Bi, S. J. Moon, L. Häggman, G. Boschloo, L. Yang, E. M. J. Johansson, M. K. Nazeeruddin, M. Grätzel and A. Hagfelde, “Using a two-step deposition technique to prepare perovskite (CH3NH3PbI3) for thin film solar cells based on ZrO2 and TiO2 mesostructures,” RSC Adv., vol. 3, p. 18762, 2013.
[52] J. Burschka, N. Pellet, S. J. Moon, R. Humphry-Baker, P. Gao, M. K. Nazeeruddin and M. Grätzel, “Sequential deposition as a route to high-performance perovskite-sensitized solar cells,” Nature, vol. 499, p. 316, 2013.
[53] Y. Zhou, M. Yang, W. Wu, A. L. Vasiliev, K. Zhu and N. P. Padture, “Room-temperature crystallization of hybrid-perovskite thin films via solvent-solvent extraction for high-performance solar cells,” J. Mater. Chem. A, vol. 3, p. 8187, 2015.
[54] C. Y. Chan, Y. Wang, G. W. Wu, W. G. Diau, “Solvent-extraction crystal growth for highly efficient carbon-based mesoscopic perovskite solar cells free of hole conductors,” J. Mater. Chem. A, vol. 4, p. 3872, 2016.
[55] W. Nie, H. Tsai, R. Asadpour, J. C. Blancon, A. J. Neukirch, G. Gupta, J. J. Crochet, M. Chhowalla, S. Tretiak, M. A. Alam, H. L. Wang and A. D. Mohite, “High-efficiency solution-processed perovskite solar cells with millimeter-scale grains,” Science, vol. 347, p. 522, 2015.
[56] D. W. deQuilettes, S. M. Vorpahl, S. D. Stranks, H. Nagaoka, G. E. Eperon, M. E. Ziffer, H. J. Snaith and D. S. Ginger, “Impact of microstructure on local carrier lifetime in perovskite solar cells,” Science, vol. 348, p. 683, 2015.
[57] W. Li, J. Fan, J. Li, Y. Mai and L. Wang, “Controllable grain morphology of perovskite absorber film by molecular self-assembly toward efficient solar cell exceeding 17%,” J. Am. Chem. Soc., vol. 137, p. 10399, 2015.
[58] G. Yang, C. Wang, H. Lei, X. Zheng, P. Qin, L. Xiong, X. Zhao, Y. Yan and G. Fang, “Interface engineering in planar perovskite solar cells-energy level alignment, perovskite morphology control and high performance achievement,” J. Mater. Chem. A, vol. 5, p. 1658, 2017.
[59] K. G. Lim, S. Ahn, Y. H. Kim, Y. Qi and T. W. Lee, “Universal energy level tailoring of self-organized hole extraction layers in organic solar cells and organic-inorganic hybrid perovskite solar cells,” Energy Environ. Sci., vol. 9, p. 932, 2016.
[60] J. Peng, Y. Wu, W. Ye, D. A. Jacobs, H. Shen, X. Fu, Y. Wan, T. Duong, N. Wu, C. Barugkin, H. T. Nguyen, D. Zhong, J. Li, T. Lu, Y. Liu, M. N. Lockrey, K. J. Weber, K. R. Catchpole and T. P. White, “Interface passivation using ultrathin polymer-fullerene films for high-efficiency perovskite solar cells with negligible hysteresis,” Energy Environ. Sci., vol. 10, p. 1792, 2017.
[61] A. J. Pearson, G. E. Eperon, P. E. Hopkinson, S. N. Habisreutinger, J. T. W. Wang, H. J. Snaith and N. C. Greenham, “Oxygen degradation in mesoporous Al2O3/CH3NH3PbI3-xClx perovskite solar cells kinetics and mechanisms,” Adv. Energy Mater., vol. 6, p. 1600014, 2016.
[62] M. I. Ahmed, Z. Hussain, M. Mujahid, A. N. Khan, S. S. Javaid and A. Habib, “Low resistivity ZnO-GO electron transport layer based CH3NH3PbI3 solar cells,” AIP Adv., vol. 6, p. 065303, 2016.
[63] E. Nouri, M. R. Mohammadi and P. Lianos, “Improving the stability of inverted perovskite solar cells under ambient conditions with graphene-based inorganic charge transporting layers,” Carbon, vol. 126, p. 208, 2018.
[64] J. Cao, H. Yu, S. Zhou, M. Qin, T. K. Lau, X. Lu, N. Zhao and C. P. Wong, “Low-temperature solution-processed NiOx films for air-stable perovskite solar cells,” J. Mater. Chem. A, vol. 5, p. 11071, 2017.
[65] K. Wang, Y. Shi, Q. Dong, Y. Li, S. Wang, X. Yu, M. Wu and T. Ma, “Low-temperature and solution-processed amorphous WOX as electron-selective layer for perovskite solar cells,” J. Phys. Chem. Lett., vol. 6, p. 755, 2015.
[66] M. M. Lee, J. Teuscher, T. Miyasaka, T. N. Murakami and H. J. Snaith, “Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites,” Science, vol. 338, p. 643. 2012.
[67] H. Zhou, Q. Chen, G. Li, S. Luo, T. Song, H. S. Duan, Z. Hong, J. You, Y. Liu and Y. Yang, “Interface engineering of highly efficient perovskite solar cells,” Science, vol. 345, p. 6196, 2014.
[68] Y. Z. Zheng, E. F. Zhao, F. L. Meng, X. S. Lai, X. M. Dong, J. J. Wu and X. Tao, “Iodine-doped ZnO nanopillar arrays for perovskite solar cells with high efficiency up to 18.24%,” J. Mater. Chem. A, vol. 5, p. 12416, 2017.
[69] J. Song, E. Zheng, X. F. Wang, W. Tian and T. Miyasaka, “Low-temperature-processed ZnO-SnO2 nanocomposite for efficient planar perovskite solar cells,” Sol. Energy Mater. Sol. Cells, vol. 144, p. 623, 2016.
[70] X. Yu, S. Chen, K. Yan, X. Cai, H. Hu, M. Peng, B. Chen, B. Dong, X. Gao and D. Zou, “Enhanced photovoltaic performance of perovskite solar cells with mesoporous SiO2 scaffolds,” J. Power Sources, vol. 325, p. 534, 2016.
[71] S. S. Shin, E. J. Yeom, W. S. Yang, S. Hur, M. G. Kim, J. Im, J. Seo, J. H. Noh and S. I. Seok, “Colloidally prepared La-doped BaSnO3 electrodes for efficient, photostable perovskite solar cells,” Science, vol. 356, p. 167, 2017.
[72] X. Wang, L. L. Deng, L. Y. Wang, S. M. Dai, Z. Xing, X. X. Zhan, X. Z. Lu, S. Y. Xie, R. B. Huang and L. S. Zheng, “Cerium oxide standing out as an electron transport layer for efficient and stable perovskite solar cells processed at low temperature,” J. Mater. Chem. A, vol. 5, p. 1706, 2017.
[73] A. Kogo, M. Ikegami and T. Muyasaka, “A SnOx-brookite TiO2 bilayer electron collector for hysteresis-less high efficiency plastic perovskite solar cells fabricated at low process temperature,” Chem. Commun., vol. 52, p. 8119, 2016.
[74] E. H. Anaraki, A. Kermanpur, M. T. Mayer, L. Steier, T. Ahmed, S. H. Turren-Cruz, J. Seo, J. Luo, S. M. Zakeeruddin, W. R. Tress, T. Edvinsson, M. Grätzel, A. Hagfeldt and J. P. Correa-Baena, “Low-temperature Nb-doped SnO2 electron selective contact yields over 20% efficiency in planar perovskite solar cells,” ACS Energy Lett., vol. 3, p. 773, 2018.
[75] M. M. Tavakoli, K. H. Tsui, Q. Zhang, J. He, Y. Yao, D. Li and Z. Fan, “Highly efficient flexible perovskite solar cells with antireflection and self-cleaning nanostructures,” ACS Nano, vol. 9, p. 10287, 2015.
[76] M. Josť, S. Albrecht, L. Kegelmann, C. M. Wolff, F. Lang, B. Lipovsěk, J. Krc, L. Korte, D. Neher, B. Rech and M. Topic, “Efficient light management by textured nanoimprinted layers for perovskite solar cells,” ACS Photon., vol. 4, p. 1232, 2017.
[77] A. Peer, R. Biswas, J. M. Park, R. Shinar and J. Shinar, “Light management in perovskite solar cells and organic LEDs with microlens arrays,” Opt. Express, vol. 9, p. 10704, 2017.
[78] U. W. Paetzold, W. Qin, F. Finger, J. Poortmans and D. Cheyns, “Nanophotonic front electrodes for perovskite solar cells,” Appl. Phys. Lett., vol. 106, p. 173101, 2015.
[79] S. M. Kang, S. Jang, J. K. Lee, J. Yoon, D. E. Yoo, J. W. Lee, M. Choi and N. G. Park, “Moth-eye TiO2 layer for improving light harvesting efficiency in perovskite solar cells,” Small, vol. 12, p. 2443, 2016.
[80] H. Zhang, M. Kramarenko, J. Osmond, J. Toudert and J. Martorell, “Natural random nanotexturing of the Au interface for light backscattering enhanced performance in perovskite solar cell,” ACS Photon., vol. 5, p. 2243, 2018.
[81] J. Wang, M. Qin, H. Tao, W. Ke, Z. Chen, J. Wan, P. Qin, L. Xiong, H. Lei, H. Yu, and G. Fang, “Performance enhancement of perovskite solar cells with Mg-doped TiO2 compact film as the hole-blocking layer”, Appl. Phys. Lett., vol. 106, p. 121104, 2015.
[82] J. Choi, S. Song, M. T. Hörantner, H. J. Snaith and T. Park, “Well-defined nanostructured, single-crystalline TiO2 electron transport layer for efficient planar perovskite solar cells,” ACS Nano, vol. 10, p. 6029, 2016.
[83] J. Yoon, H. Sung, G. Lee, W. Cho, N. Ahn, H. S. Jung and M. Choi, “Superflexible, high-efficiency perovskite solar cells utilizing graphene electrodes-towards future foldable power sources,” Energy Environ. Sci., vol. 10, p. 337, 2017.
[84] Y. Wang, P. Wang, X. Zhou, C. Li, H. Li, X. Hu, F. Li, X. Liu, M. Li and Y. Song, “Diffraction-grated perovskite induced highly efficient solar cells through nanophotonic light trapping,” Adv. Energy Mater., vol. 8, p. 1702960, 2018.
[85] M. T. Hörantner, W. Zhang, M. Saliba, K. Wojciechowski and H. J. Snaith, “Templated microstructural growth of perovskite thin films via colloidal monolayer lithography,” Energy Environ. Sci., vol. 8, p. 2041, 2015.
[86] X. Zheng, Z. Wei, H. Chen, Q. Zhang, H. He, S. Xiao, Z. Fan, K. S. Wong and S. Yang, “Designing nanobowl arrays of mesoporous TiO2 as an alternative electron transporting layer for carbon cathode-based perovskite solar cells,” Nanoscale, vol. 8, p. 6393, 2016.
[87] N. Aeineh, E. M. Barea, A. Behjat, N. Sharifi and I. Mora-Seró, “Inorganic surface engineering to enhance perovskite solar cell efficiency,” ACS Appl. Mater. Interfaces, vol. 9, p. 13181, 2017.
[88] Q. Luo, X. Deng, C. Zhang, M. Yu, X. Zhou, Z. Wang, X. Chen and S. Huang, “Enhancing photovoltaic performance of perovskite solar cells with silica nanosphere antireflection coatings,” Solar Energy, vol. 169, p. 128, 2018.
[89] C. K. Huang, C. Y. Chen, J. L. Han, C. C. Chen, M. D. Jiang, J. S. Hsu, C. H. Chan and K. H. Hsieh, “Immobilization of silver nanoparticles on silica microspheres,” J. Nanopart. Res., vol. 12, p. 199, 2010.
[90] C. H. Hou, S. Z. Tseng, C. H. Chan, T. J. Chen, H. T. Chien, F. L. Hsiao, H. K. Chiu, C. C Lee, Y. L. Tsai and C. C. Chen, “Output power enhancement of light-emitting diodes via two-dimensional hole arrays generated by a monolayer of microspheres,” Appl. Phys. Lett., vol. 95, p. 133105, 2009.
[91] C. H. Chan, C. H. Hou, S. Z. Tseng, T. J. Chen, H. T. Chien, F. L. Hsiao, C. C. Lee, Y. L. Tsai and C. C. Chen, “Improved output power of GaN-based light-emitting diodes grown on a nanopatterned sapphire substrate,” Appl. Phys. Lett., vol. 95, p. 011110, 2009.
[92] L. Zhao, C. L. Zhou, H. L. Li, H. W. Diao and W. J. Wang, “Role of the work function of transparent conductive oxide on the performance of amorphous/crystalline silicon heterojunction solar cells studied by computer simulation,” Phys. Stat. Sol., vol. 5, p. 1215, 2008.
[93] F. Steuber, J. Staudigel, M. Stossel and J. Simmerer, “Reduced operating voltage of organic electroluminescent devices by plasma treatment of the indium tin oxide anode,” Appl. Phys. Lett, vol. 74, p. 3558, 1999.
[94] K. Yee, “Numerical solution of initial boundary value problems involving Maxwell’s equations in isotropic media”, IEEE Trans. Antennas Propag., vol. 14, p. 302, 1966.
[95] J. P. Berenger, “A perfectly matched layer for the absorption of electromagnetic-waves,” J. of Comput. Phys., vol. 114, p. 185, 1994.
[96] J. W. Kim, J. H. Jang, M. C. Oh, J. W. Shin, D. H. Cho, J. H. Moon and J. I. Lee, “FDTD analysis of the light extraction efficiency of OLEDs with a random scattering layer,” Opt. Express, vol. 22, p. 498, 2014.
[97] A. M. Winslow, “Numerical solution of the quasilinear poisson equation in a nonuniform triangle mesh,” J. of Comput. Phys., vol. 2, p. 149, 1967.
[98] M. Fujita, T. Ueno, K. Ishihara, T. Asano, S. Noda, H. Ohata, T. Tsuji, H. Nakada and N. Shimoji, “Reduction of operating voltage in organic light-emitting diode by corrugated photonic crystal structure,” Appl. Phys. Lett, vol. 85, p. 5769, 2004.
[99] Y. H. Ho, K. Y. Chen, K. Y. Peng, M. C. Tsai, W. C. Tian and P. K. Wei, “Enhanced light out-coupling of organic light-emitting diode using metallic nanomesh electrodes and microlens array,” Opt. Express, vol. 7, p. 8535, 2013.
[100] X. Jing and Y. Jin, “Transmittance analysis of diffraction phase grating,” Appl. Opt., vol. 50, p. C11, 2011.
[101] Q. Guo, H. Sun, J. Wang, D. Yang, J. Chen and D. Ma, “Charge generation mechanism of tandem organic light emitting diodes with pentacene/C70 organic heterojunction as the connecting layer,” J. Mater. Chem. C, vol. 4, p. 376, 2016.
[102] H. Zhang, J. Cheng, F. Lin, H. He, J. Mao, K. S. Wong, A. K. Y. Jen and W. C. H. Choy, “Pinhole-free and surface-nanostructured NiOx film by room-temperature solution process for high-performance flexible perovskite solar cells with good stability and reproducibility,” ACS Nano, vol. 10, p. 1503, 2016.
[103] Y. Yang, K. Ri, A. Mei, L. Liu, M. Hu, T. Liu, X. Li and H. Han, “The size effect of TiO2 nanoparticles on a printable mesoscopic perovskite solar cell,” J. Mater. Chem. A, vol. 3, p. 9103, 2015.
[104] Y. Wang, W. Y. Rho, H. Y. Yang, T. Mahmoudi, S. Seo, D. H. Lee and Y. B. Hahn, “Air-stable, hole-conductor-free high photocurrent perovskite solar cells with CH3NH3PbI3-NiO nanoparticles composite,” Nano Energy, vol. 27, p. 535, 2016.
[105] K. Wang, C. Liu, P. Du, J. Zheng and X. Gong, “Bulk heterojunction perovskite hybrid solar cells with large fill factor,” Energy Environ. Sci., vol. 8, 1245, 2015.
[106] D. Yang, R. Yang, J. Zhang, Z. Yang, S. Liu and C. Li, “High efficiency flexible perovskite solar cells using superior low temperature TiO2,” Energy Environ. Sci., vol. 8, 3208, 2015. |