參考文獻 |
Asher, J. W., Hoskere, S. N., Ewing, R. D., Van Volkinburg, D. R., Mayes, R. L., and Button, M. (1995). Seismic performance of the base isolated USC University Hospital in the 1994 Northridge earthquake. ASME-PUBLICATIONS-PVP, 319, 147-154.
ATC. (1993). Proceedings of seminar on seismic isolation, passive energy dissipation, and active control (Report No.ATC-17-1). San Francisco, CA: Applied Technology Council.
ATC. (1994). Guidelines and commentary for the seismic rehabilitation of buildings (Report No. 33-02). Redwood City, CA: Applied Technology Council.
Basoz, N., and Kiremidjian, A. S. (1998). Evaluation of bridge damage data from the Loma Prieta and Northridge, California earthquakes (No. MCEER-98-0004).
Basoz, N. I., Kiremidjian, A. S., King, S. A., and Law, K. H. (1999). Statistical analysis of bridge damage data from the 1994 Northridge, CA, earthquake. Earthquake Spectra, 15(1), 25-54.
Bozorgnia, Y., Mahin, S. A., and Brady, A. G. (1998). Vertical response of twelve structures recorded during the Northridge earthquake. Earthquake Spectra, 14(3), 411-432.
Bruneau, M., Wilson, J. C., and Tremblay, R. (1996). Performance of steel bridges during the 1995 Hyogo-ken Nanbu (Kobe, Japan) earthquake. Canadian Journal of Civil Engineering, 23(3), 678-713.
Buckle, I. G., and Mayes, R. L. (1990). Seismic isolation: history, application, and performance-a world view. Earthquake spectra, 6(2), 161-201.
Calvi, G. M., and Pavese, A. (1997). Conceptual design of isolation systems for bridge structures. Journal of Earthquake Engineering, 1(01), 193-218.
Çelebi, M. (1996). Successful performance of a base‐isolated hospital building during the 17 January 1994 Northridge earthquake. The Structural Design of Tall and Special Buildings, 5(2), 95-109.
Chen, W. F., and Duan, L. (Eds.). (2014). Bridge engineering handbook: construction and maintenance. CRC press.
Chen, L., Sun, L., and Nagarajaiah, S. (2015). Cable with discrete negative stiffness device and viscous damper: passive realization and general characteristics.
Smart Struct. Syst, 15(3), 627-643.
Cheng, C. T., and Chao, C. H. (2017). Seismic behavior of rocking base-isolated structures. Engineering Structures, 139, 46-58.
Coburn, A., and Spence, R. (2003). Earthquake protection. John Wiley & Sons.
Constantinou, M. C., Soong, T. T., and Dargush, G. F. (1998). Passive energy dissipation systems for structural design and retrofit.
Corana, A., Marchesi, M., Martini, C., and Ridella, S. (1987). Minimizing multimodal functions of continuous variables with the simulated annealing algorithm. ACM Transactions on Mathematical Software (TOMS), 13(3), 262-280.
Eberhart, R., and Kennedy, J. (1995). A new optimizer using particle swarm theory. Proceedings of the Sixth International Symposium on (pp. 39-43). IEEE.
Eberhart, R. C., and Shi, Y. (1998).Comparison between genetic algorithms and particle swarm optimization. International conference on evolutionary programming (pp. 611-616). Springer, Berlin, Heidelberg.
Fenz, D. M., and Constantinou, M. C. (2008). Spherical sliding isolation bearings with adaptive behavior: Theory. Earthquake engineering & structural dynamics, 37(2), 163-183.
Fourie, P. C., and Groenwold, A. A. (2002). The particle swarm optimization algorithm in size and shape optimization. Structural and Multidisciplinary Optimization, 23(4), 259-267.
Fujita, T. (1998). Seismic isolation of civil buildings in Japan. Progress in Structural Engineering and Materials, 1(3), 295-300.
Ghobarah, A., and Ali, H. M. (1988). Seismic performance of highway bridges. Engineering Structures, 10(3), 157-166.
Heydari, M., and Mousavi, M. (2015). The comparison of seismic effects of near-field and far-field earthquakes on relative displacement of seven-storey concrete building with shear wall. Current World Environment, 10(1), 0-46.
Jangid, R. S., and Kelly, J. M. (2001). Base isolation for near‐fault motions. Earthquake engineering & structural dynamics, 30(5), 691-707.
Japan Road Association. (1996). Design Specifications of Highway Bridges, Part V Seismic Design, Maruze, Tokyo.
Juang, D. S. and Chuang, W.S. (2007). “A PSO-SA hybrid searching algorithm for least weight design of structures (in Chinese).” 31th National Conference on Theoretical and Applied Mechanics, ISU, Kaohsiung, Taiwan.
Kawashima, K., and Unjoh, S. (1989). Development of hybrid control technology.
Civil Engineering Journal, 32(6), 2-5.
Kawashima, K., Hasegawa, K., Unjoh, S., and Nagashima, H. (1991). Current research efforts in Japan for passive and active control of highway bridges against earthquake. In PROCEEDINGS OF THE 23RD JOINT MEETING OF
THE US-JAPAN COOPERATIVE PROGRAM IN NATURAL RESOURCES
PANEL ON WIND AND SEISMIC EFFECTS.
Kawashima, K., Unjoh, S. and Shimizu, H. (1992a). “Experiments on Dynamic Characteristics of Variable Damper.” Proc. Japan National Symposium on
Structural Response Control, Japan, 121-128.
Kawashima, K., Unjoh, S. and Shimizu, H. (1992b). “Experiments on Dynamic Characteristics of Variable Damper. ”Proc. Japan National Symposium on
Structural Response Control, Japan, 311-317.
Kawashima, K. (2002). Damage of bridges resulting from fault rupture in the 1999 Kocaeli and Duzce, Turkey earthquakes and the 1999 Chi-Chi, Taiwan earthquake. Structural Engineering/Earthquake Engineering, 19(2), 179s-197s.
Kelly, J. M. (1986). Aseismic base isolation: review and bibliography. Soil Dynamics and Earthquake Engineering, 5(4), 202-216.
Kelly, J. M. (1998). Seismic isolation of civil buildings in the USA. Progress in Structural Engineering and Materials, 1(3), 279-285.
Kennedy, J. and Eberhart, R.C. (1995). “Particle swarm optimization”. Proceedings of IEEE International Conference on Neural Networks, Perth, Australia, vol. 4, 1942-1948.
Kennedy, J., and Eberhart, R. C. (2001). Swarm Intelligence, Morgan Kaufmann.
Kirkpatrick, S., Gelatt, C. D., and Vecchi, M. P. (1983).Optimization by simulated annealing. Science, 220(4598), 671-680.
Koh, C. G., and Kelly, J. M. (1988). A simple mechanical model for elastomeric bearings used in base isolation. International journal of mechanical sciences, 30(12), 933-943.
Kosa, K., Tazaki, K., and Yamaguchi, E. (2002). Mechanism of damage to Shiwei Bridge caused by 1999 Chi-Chi earthquake. Structural Engineering/Earthquake Engineering, 19(2), 221s-226s.
Lee, G. C., and Loh, C. H. (1999). Preliminary report from MCEER-NCREE workshop on the 921 Taiwan earthquake. Multidisciplinary Center for Earthquake Engineering Research.
Liao, W. I., Loh, C. H., and Wan, S. (2000). Responses of isolated bridges subjected to near-fault ground motions recorded in Chi-Chi earthquake. International Workshop on Annual Commemoration of Chi-Chi Earthquake, Sep (pp. 18-20).
Lu, L. Y., Shih, M. H., Tzeng, S. W., and Chang Chien, C. S. (2003). Experiment of a sliding isolated structure subjected to near-fault ground motion. In Proceedings of the 7th pacific conference on earthquake engineering (pp. 13-15).
Lu, L. Y., Shih, M. H., and Wu, C. Y. (2004).Near-fault seismic isolation using sliding bearings with variable curvatures. Proceedings of the 13th World Conference on Earthquake Engineering (No. 3264).
Lu, L. Y., Chung, L. L., Wu, L. Y., and Lin, G. L. (2006). Dynamic analysis of structures with friction devices using discrete-time state-space formulation. Computers & structures, 84(15), 1049-1071.
Lu, L. Y., Wang, J., and Yeh, S. W. (2007). Experimental verification of polynomial friction pendulum isolator for near-fault seismic isolation. Proceedings of the 4th International Structural Engineering and Construction Conference (ISEC-4).
Lu, L. Y., Lin, G. L., and Kuo, T. C. (2008). Stiffness controllable isolation system for near-fault seismic isolation. Engineering Structures, 30(3), 747-765.
Lu, L. Y., Lee, T. Y., Yeh, I. L., and Chang, H. (2010). Rocking bearings with variable frequency for near-fault seismic isolation. Journal of the Chinese Institute of Civil and Hydraulic Engineering, 22(3), 283-298.
Lu, L. Y., Lee, T. Y., and Yeh, S. W. (2011). Theory and experimental study for sliding isolators with variable curvature. Earthquake Engineering & Structural Dynamics, 40(14), 1609-1627.
Lu, L. Y., and Hsu, C. C. (2013). Experimental study of variable-frequency rocking bearings for near-fault seismic isolation. Engineering structures, 46, 116-129.
Lu, L. Y., Lee, T. Y., Juang, S. Y., and Yeh, S. W. (2013). Polynomial friction pendulum isolators (PFPIs) for building floor isolation: An experimental and theoretical study. Engineering Structures, 56, 970-982.
Martelli, A., and Forni, M. (1998).Seismic isolation of civil buildings in Europe. Progress in structural engineering and materials, 1(3), 286-294.
Matsagar, V. A., and Jangid, R. S. (2006).Seismic response of simply supported base-isolated bridge with different isolators. International Journal of Applied Science and Engineering, 4(1), 53-69.
MATLAB (2000). The Math Works, Inc., Massachusetts, USA.
Otsuka, H. (1997). Report on the Disaster Caused by the 1995 Hyogoken Nanbu Earthquake, Chapter 5, Damage to Highway Bridges. Journal of Research.
Naeim, F., and Kelly, J. M. (1999). Design of seismic isolated structures: from theory to practice. John Wiley & Sons.
Poli, Riccardo, James Kennedy, and Tim Blackwell. "Particle swarm optimization." Swarm intelligence 1.1 (2007): 33-57.
Pranesh, M., and Sinha, R. (2000). VFPI: an isolation device for aseismic design. Earthquake engineering & structural dynamics, 29(5), 603-627.
Priestley, M. N., Seible, F., and Calvi, G. M. (1996). Seismic design and retrofit of bridges.John Wiley & Sons.
Rådeström, S., Ü lker-Kaustell, M., Andersson, A., Tell, V., and Karoumi, R. (2017). Application of fluid viscous dampers to mitigate vibrations of high-speed railway bridges. International Journal of Rail Transportation, 5(1), 47-62.
Roberts, J. E. (2005). Caltrans structural control for bridges in high‐seismic zones.
Earthquake engineering & structural dynamics, 34(4‐ 5), 449-470.
Robinson, W., and Greenbank, L. (1976). An extrusion energy absorber suitable for the protection of structures during an earthquake. Earthquake Engineering &
Structural Dynamics, 4(3), 251-259.
Shi, Y., and Eberhart, R. C. (1998a). Parameter selection in particle swarm optimization. In International conference on evolutionary programming (pp. 591-600).Springer, Berlin, Heidelberg.
Shi, Y., and Eberhart, R. (1998b). A modified particle swarm optimizer. In Evolutionary Computation Proceedings, 1998. IEEE World Congress on Computational Intelligence. The 1998 IEEE International Conference on (pp. 69-73). IEEE.
Shi, X., Zhu, S., Li, J. Y., and Spencer Jr, B. F. (2016). Dynamic behavior of stay cables with passive negative stiffness dampers. Smart Materials and
Structures, 25(7), 075044.
Soong, T. T. and Constantinou, M. C. (1994). Passive and Active Structural Control
in Civil Engineering, Springer: Vienna, New York
Symans, M. D., and Constantinou, M. C. (1999). Semi-active control systems for seismic protection of structures: a state-of-the-art review. Engineering structures, 21(6), 469-487.
Taflanidis, A. A. (2011). Optimal probabilistic design of seismic dampers for the protection of isolated bridges against near-fault seismic excitations.
Engineering structures, 33(12), 3496-3508.
Vaurigaud, B., Manevitch, L. I., and Lamarque, C. H. (2011). Passive control of aeroelastic instability in a long span bridge model prone to coupled flutter using targeted energy transfer. Journal of Sound and Vibration, 330(11), 2580-2595.
Wang, Y. P., Chung, L. L., and Liao, W. H. (1998). Seismic response analysis of bridges isolated with friction pendulum bearings. Earthquake Engineering & Structural Dynamics, 27(10), 1069-1093.
Zhang, S., and Wang, G. (2013). Effects of near-fault and far-fault ground motions on nonlinear dynamic response and seismic damage of concrete gravity dams. Soil Dynamics and Earthquake Engineering, 53, 217-229. |