參考文獻 |
[1] A. C. Lund, "Topological and chemical arrangement of binary alloys during severe deformation", Journal of Applied Physics, Vol. 95 pp. 4815 (2004).
[2] H. S. Chen, H. J. Leamy, and C. E. Miller, "Preparation of glassy metals", Ann. Rev. Mater. Sci. 10:363-91 (1980).
[3] R. Babilas, R. Nowosielski, "Iron-based bulk amorphous alloys", Archives of materials science and engineering, Vol. 44 Issue 1 pp. 5-27 (2010).
[4] A. Inoue, K. Hashimoto, "Amorphous and Nanocrystalline Materials", (2001).
[5] C. Suryanarayana, A. Inoue, "Bulk metallic glasses", LLC, Taylor and Francis Group, (2011).
[6] M. Ylönen, T. Vähä-Heikkilä, H. Kattelus, "Amorphous metal alloy based MEMS for RF applications", Sensors and Actuators A, Vol. 132 pp. 283-288 (2006).
[7] G. Ruitenberg, P. D. Hey, F. Sommer, and J. Sietsma, "Pressure-Induced Structural Relaxation in Amorphous Pd40Ni40P20: The Formation Volume for Diffusion Defects", Physical review letters, Vol. 79 Number 24 (1997).
[8] 鄭振東編譯,"非晶質金屬漫談",建宏出版社,pp. 39,1990年。
[9] J. Kramer, "Produced the first amorphous metals through vapor deposition", Annalen of Physics, Vol. 411 pp. 37 (1934).
[10] A. Brenner, D. E. Couch, and E. K. Williams, "Electrodeposition of Alloys of Phosphorus with Nickel or Cobalt", Journal of Research of the National Bureau of Standards, Vol. 44 pp. 109-122 (1950).
[11] W. Klement, R. H. Willens, and P. Duwez, "Non-crystalline Structure in solidified Gold-Silicon alloys", Nature, Vol. 187 pp. 869-870 (1960).
[12] H. S. Chen, "Glassy metals", Rep. Prog. Phys, Vol. 43 p. 364 (1980).
[13] C. C. Koch, O. B. Cavin, C. G. McKamey, and J. O. Scarbrough, "Preparation of amorphous Ni60Nb40 by mechanical alloying", Applied Physics Letters, Vol. 43 pp. 1017-1019 (1983).
[14] A. Inoue, "High strength bulk amorphous alloys with low critical cooling rates," Materials Transactions JIM, Vol. 36 pp. 866-875 (1995).
[15] A. Inoue, T. Zhang, and T. Masumoto, "Production of Amorphous Cylinder and Sheet of La55Al25Ni20 Alloy by a Mettallic Mold Casting Method", Material Transactions JIM, Vol. 31 pp. 425-428 (1990).
[16] A. Inoue, A. Kato, T. Zhang, and S. G. Kim, "Mg-Cu-Y Amorphous Alloys With High Mechanical Strengths Produced by a Metallic Mold Casting Method", Materials Transactions JIM, Vol. 32 pp. 609-616 (1991).
[17] A. Inoue, T. Nakamurat, N. Nishiyamatt, and T. Masumoto, "Mg-Cu-Y Bulk Amorphous Alloys with High Tensile Strength Produced by a High-Pressure Die Casting Method", Materials Transactions JIM, Vol. 33 pp. 937-945 (1992).
[18] A. Inoue, A. Takeuchi, "Recent development and application products of bulk glassy alloys", Acta Materialia, Vol. 59 pp. 2243-2267 (2011).
[19] A. Inoue, B. Shen, A. Takeuchi, "Developments and Applications of Bulk Glassy Alloys in Late Transition Metal Base System", Materials Transactions, Vol. 47 pp. 1275-1285 (2006).
[20] A. Inoue, Y. Shinohara, J. S. Gook, "Thermal and magnetic properties of bulk Fe-based glassy alloys prepared by copper mold casting", Material Transactions, Vol. 36 pp. 1427-1433 (1995).
[21] R. Abbaschian, L. Abbaschian, R. E. Reed-hill, Physical Metallurgy Principles, Third edition, p. 278 (1994).
[22] A. Inoue, "Stabilization of Metallic Supercooled Liquid and Bulk Amorphous Alloys", Acta Materialia, Vol. 48 pp. 279-306 (2000).
[23] Q. Jing, Y. Zhang, D. Wang, and Y. Li, "A Study of the Glass Forming Ability in ZrNiAl Alloys", Materials Science and Engineering:A, Vol. 441 pp. 106-111 (2006).
[24] Z. P. Lu, C. T. Liu, "Role of minor alloying additions in formation of bulk metallic glasses: A Review", Journal of Material Science, Vol. 39 pp. 3965-3974 (2004).
[25] Z. P. Lu, C. T. Liu, W. D. Porter "Role of yttrium in glass formation of Fe-based bulk metallic glasses", Applied Physics Letters, Vol. 83 Number 13 pp. 2581-2583 (2003)
[26] J. Shen, Q. Chen, J. Sun, H. Fan, G. Wang, "Exceptionally high glass-forming ability of an FeCoCrMoCBY alloy", Applied Physics Letters, Vol. 86 pp. 151907-1-3 (2005).
[27] A. Inoue, Materials Transactions JIM, Vol. 36 pp. 866 (1995).
[28] Z. P. Lu, C. T. Liu, "A new glass-forming ability criterion for bulk metallic glasses", Acta Materialia, Vol. 50 pp. 3501-3512 (2002).
[29] X. H. Du, J. C. Huang, C. T. Liu, and Z. P. Lu, "New Criterion of Glass Forming Ability for Bulk Metallic Glasses", Journal of Applied Physics, Vol. 101 pp. 086108-1-3 (2007).
[30] Y. Li, S. C. Ng, C. K. Ong, H. H. Hng, T. T. Goh, "Glass forming ability of bulk glass forming alloys", Scr Mater, Vol. 36 p. 783 (1997).
[31] S. Guo, Z. P. Lu, C. T. Liu, "Identify the best glass forming ability criterion", Intermetallics, Vol. 18 pp. 883-888 (2010).
[32] Y. Lu, Y. Huang, Wei Zheng, Jun Shen, "Free volume and viscosity of Fe-Co-Cr-Mo-C-B-Y bulk metallic glasses and their correlation with glass-forming ability", Journal of Non-Crystalline Solids, Vol. 358 pp. 1274-1277 (2012).
[33] Y. Kawamura, T. Itoi, T. Nakamura, A. Inoue, "Superplasticity in Fe-based metallic glass with wide supercooled liquid region", Materials Science and Engineering, A304-306 pp. 735-739 (2001).
[34] J. Buenz, K. A. Padmanabhan, G. Wilde, "On the applicability of a mesoscopic interface sliding controlled model for understanding superplastic flow in bulk metallic glasses", Intermetallics, Vol. 60 pp. 50-57 (2015).
[35] P. H. Tsai , A. C. Xiao , J. B. Li , J. S. C. Jang , J. P. Chu , J. C. Huang, "Prominent Fe-based bulk amorphous steel alloy with large supercooled liquid region and superior corrosion resistance", Journal of alloys and compounds, Vol. 586 pp. 94-98 (2014).
[36] J. S. C. Jang, C. F. Chang, Y. C. Huang, J. C. Huang, W.J. Chiang, C.T. Liu, "Viscous flow and microforming of a Zr-base bulk metallic glass", Intermetallics, Vol. 17 pp. 200-204 (2009).
[37] P. Murali, U. Ramamurty, "Embrittlement of a bulk metallic glass due to sub-Tg annealing", Acta Materialia, Vol. 53 pp. 1467-1478 (2005).
[38] Y. Kawamura, T. Nakamura, H. Kato, H. Mano, A. Inoue, "Newtonian and non-Newtonian viscosity of supercooled liquid in metallic glasses", Materials Science and Engineering, A304-306 pp. 674-678 (2001).
[39] Y. Kawamura, T. Nakamura, A. Inoue, "Superplasticity in Pd40Ni40P20 metallic glass", Scripta Materialia, Vol. 39 No. 3 pp. 301-306 (1998).
[40] G. Wang, J. Shen, J. F. Sun , Y. J. Huang, J. Zou, Z. P. Lu, Z. H. Stachurski, B. D. Zhou, "Superplasticity and superplastic forming ability of a Zr-Ti-Ni-Cu-Be bulk metallic glass in the supercooled liquid region", Journal of Non-Crystalline Solids, Vol. 351 pp. 209-217 (2005).
[41] J. Shen, G. Wang, J. F. Sun, Z. H. Stachurskic, C. Yan, L.Ye, B. D. Zhou, "Superplastic deformation behavior of Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk metallic glass in the supercooled liquid region", Intermetallics, Vol. 13 pp. 79-85 (2005).
[42] K. C. Chan, L. Liu, J. F. Wang, "Superplastic deformation of Zr55Cu30Al10Ni5 bulk metallic glass in the supercooled liquid region", Journal of Non-Crystalline Solids, Vol. 353 pp. 3758-3763 (2007).
[43] J. Ferenc, T. Erenc-Sedziak, M. Kowalczyk, T. Kulik, "The supercooled liquid region span of Fe-based bulk metallic glasses", Journal of Alloys and Compounds, Vol. 495 pp. 327-329 (2010).
[44] B. Bendjemil, A. Bouchareb, A. Belbah, J. Bougdira, R. Piccin, M. Baricco, "Crystallization Behavior of Fe50−?Cr15Mo14C15B6M? (? = 0, 2 and M = Y, Gd) BMG and ribbons by in situ high temperature X-ray diffraction", Chinese Physics Letters. Vol. 29 No. 10 pp. 108-103 (2012).
[45] P. S. Singh, R. L. Narayan, Indrani Sen, D. C. Hofmann, U. Ramamurty, "Effect of strain rate and temperature on the plastic deformation behaviour of a bulk metallic glass composite", Materials Science and Engineering, A 534 pp. 476-484 (2012).
[46] D. V. Louzguine-Luzgin, A. I. Bazlov, S. V. Ketov, A. Inoue, "Crystallization behavior of Fe- and Co-based bulk metallic glasses and their glass-forming ability", Materials Chemistry and Physics, Vol. 162 pp. 197-206 (2015).
[47] J. D. Ju, "Shear transformation zones in metallic glasses", (2014).
[48] S. Xie, E. P. George, "Hardness and shear band evolution in bulk metallic glasses after plastic deformation and annealing", Acta Materialia, Vol. 56 pp. 5202-5213 (2008).
[49] B. G. Yoo, J. I. Jang, "A study on the evolution of subsurface deformation in a Zr-based bulk metallic glass during spherical indentation", Journal of Physics D: Applied Physics, Vol. 41 pp. 7 (2008).
[50] M. Stoica, N. V. Steenberge, J. Bednarcik, N. Mattern, H. Franz, J. Eckert, "Changes in short-range order of Zr55Cu30Al10Ni5 and Zr55Cu20Al10Ni10Ti5 BMGs upon annealing", Journal of Alloys and Compounds, Vol. 506 pp. 85-87 (2010).
[51] G. Kumar, P. Neibecker, Y. H. Liu, J. Schroers, "Critical fictive temperature for plasticity in metallic glasses", Nature Communications 4, article number 1536 (2013).
[52] Y. Lu, Y. Huang, X. Lu, Z. Qin, J. Shen, "Specific heat capacities of Fe–Co–Cr–Mo–C–B–Y bulk metallic glasses and their correlation with glass-forming ability", Materials Letters, Vol. 143 pp. 191-193 (2015).
[53] Y. Lu, Y. Huang, J. Shen, X. Lu, Z. Qin, Z. Zhang, "Effect of Co addition on the shear viscosity of Fe-based bulk metallic glasses", Journal of Non-Crystalline Solids, Vol. 403 pp. 62-66 (2014).
[54] S. V. Ketov, A. Inoue, H. Kato, D. V. Louzguine-Luzgin, "Viscous flow of Cu55Zr30Ti10Co5 bulk metallic glass in glass-transition and semi-solid regions", Scripta Materialia, Vol. 68 pp. 219-222 (2013).
[55] J. Pan, Q. Chen, L. Liu, Y.Li, "Softening and dilatation in a single shear band", Acta Materialia, Vol. 59 pp. 5146-5158 (2011).
[56] S. F. Guoa, K. C. Chan, L. Liu, "Notch toughness of Fe-based bulk metallic glass and composites", Journal of Alloys and Compounds, Vol. 509 pp. 9441-9446 (2011).
[57] B. Shen, C. Chang, A. Inoue, "Formation, ductile deformation behavior and soft-magnetic properties of (Fe,Co,Ni)-B-Si-Nb bulk glassy alloys", Intermetallics, Vol. 15 pp. 9-16 (2007).
[58] H. Kato, A. Inoue, H.S. Chen, "Softening and heating behaviors during the nonlinear viscous flow in a Zr-based bulk metallic glass", Journal of Non-Crystalline Solids, Vol. 353 pp. 3764-3768 (2007).
[59] A. S. Argon, "Plastic deformation in metallic glasses", Acta Metall, Vol. 27 pp. 47-58 (1979).
[60] 黃宥棋, "Thermal plastic behavior and microstructure of (Zr53Cu30Ni9Al8)99.5Si0.5 bulk metallic glass", (2008).
[61] 李威錚, "Thermal plastic behavior and microstructure of Mg58Cu28.5Gd11Ag2.5 metallic glass with porous Mo particles", (2008).
[62] J. Schroers, T. Nguyen, S. O’Keeffe, A. Desai, "Thermoplastic forming of bulk metallic glass-Applications for MEMS and microstructure fabrication", Materials Science and Engineering, A449–451 pp. 898–902 (2007). |