參考文獻 |
[1] L. Mateu and F. Moll, “Review of energy harvesting techniques and applications for microelectronics”, Proc. SPIE, 5837, pp. 359-373, 2005.
[2] L. Tang, Y. Yang, and C. K. Soh, “Toward broadband vibration-based energy harvesting”, J. Intell. Mater. Syst. Struct., 21, pp. 1867–97, 2010.
[3] G. D. Pasquale and A. Soma, "Investigations on energy scavenging methods using MEMS devices", Proc. International Semiconductor Conference (CAS), vol. 1, pp. 163-166, 2008.
[4] Y. J. Wang, S. C. Shen and C. D. Chen, “Wideband Electromagnetic Energy Harvesting from a Rotating Wheel”, Small-Scale Energy Harvesting, 2012.
[5] W. Booth, “Vibration Control: How to determine your equipment needs”, Laser Focus World 46, 65–71, 2010.
[6] G. T. A. Kovacs, “Micromachined Transducers Sourcebook”, McGraw-Hill, New York, 1998.
[7] 高瑞麟,「振動型微型發電機之設計與實作」,國立清華大學,碩士論文,民國99年。
[8] C. R. Bowen, M. Arafa, "Energy Harvesting Technologies for Tire Pressure Monitoring Systems", Adv. Energy Mater, no. 7, Apr 2015.
[9] A. R. M. Siddique, S. Mahmud, B. Van Heyst, “A comprehensive review on vibration based micro power generators using electromagnetic and piezoelectric transducer mechanisms”, Energy Conversion and Management, vol. 106, pp. 728-747, 2015.
[10] R. D. Farahani, K. Chizari, D. Therriault, “Three-dimensional printing of freeform helical microstructures: a review”, Nanoscale, pp. 10470–10485, 6, 2014.
[11] J. A. Lewis, G. M. Gratson, “writing in three dimensions”, Mater. Today, 7, pp. 32–39, 2004.
[12] M. Vaezi, H. Seitz and S. Yang, “A review on 3D micro-additive manufacturing technologies”, Int. J. Adv. Manuf. Technol, 67, pp. 1721–1754, 2013.
[13] Y. J. Ciou, Y. R. Hwang, J. C. Lin, Y. T. Tseng, “Fabrication of 3D microstructures by localized electrochemical deposition with image feedback distance control and five-axis motion platform”, ECS J. Solid State Sci. Technol, 5, pp. 425, 2016.
[14] B. Bhushan and S. Matsui, “Three-Dimensional Nanostructure Fabrication by Focused Ion Beam Chemical Vapor Deposition” , Springer Handbook of Nanotechnology, Berlin, Heidelberg: Springer, pp. 211–229, 2010.
[15] S. H. Ko, J. Chung, N. Hotz, K. H. Nam, C. P. Grigoropoulos, “Metal nanoparticle direct inkjet printing for low-temperature 3D micro metal structure fabrication”, J. Micromech. Microeng, 20, p. 125010, 2010.
[16] J. W. Choi, R. Wicker, S. H. Cho, C. S. Ha and S. H. Lee, “Cure depth control for complex 3D microstructure fabrication in dynamic mask projection microstereolithography”, Rapid Prototyping Journal, 15, pp. 59–70, 2009.
[17] A. Yamada, F. Niikura, K. Ikuta, “A three-dimensional microfabrication system for biodegradable polymers with high resolution and biocompatibility”, J Micromech Microeng, 18, p. 025035, 2008.
[18] J. Hu and M. F. Yu, “Meniscus-confined three-dimensional electrodepostion for direct writing of wire bonds”, Science, 329, pp. 313-316, 2010.
[19] L. L. Lebel, B. Aissa, M. A. E. Khakani, D. Therriault, “Ultraviolet-assisted directwrite fabrication of carbon nanotube/polymer nanocomposite microcoils”, Advanced Materials, 22, pp. 592–596, 2010.
[20] C. Trlica, D. P. Parekh, L. Panich, C. Ladd, M. D. Dickey, “3-D Printing of Liquid Metals for Stretchable and Flexible Conductors”, in Proceedings of SPIE, vol. 9083, p. 90831D1-10, 2014.
[21] L. Wang, J. Liu, “Liquid phase 3D printing for quickly manufacturing conductive metal objects with low melting point alloy ink”, Science China Technological Sciences, 57, pp. 1721–1728, 2014.
[22] M. A Skylar-Scott, S. Gunasekaran, J. A. Lewis, “Laser-assisted direct ink writing of planar and 3D metal architectures”, Proc. Natl. Acad. Sci. USA, 113, pp. 6137–6142, 2016.
[23] X. L. Wang, J. Liu, “Recent advancements in liquid metal flexible printed electronics: Properties, technologies, and applications”, Micromachines, vol. 7, no. 12, 206, 2016.
[24] E. Romero, M. R. Neuman, R. O. Warrington, “Rotational energy harvester for body motion”, Proc. IEEE 24th Int. Conf. Micro Electro Mech. Syst., pp. 1325-1328, Jan. 2011.
[25] Y. Wang, C. Chen, C. Sung, “System design of a weighted-pendulum-type electromagnetic generator for harvesting energy from a rotating wheel”, IEEE/ASME Trans. Mechatronics, vol. 18, no. 2, pp. 754-763, Apr. 2013.
[26] M. Niroomand, H. R. Foroughi, “A rotary electromagnetic microgenerator for energy harvesting from human motions”, Journal of Applied Researchand Technology, vol. 14, pp. 259-267, 2016.
[27] M. A. Halim, R. Rantz, Q. Zhang, L. Gu, K. Yang, S. Roundy, “Electromagnetic energy harvesting from swing-arm motion using rotational eccentric mass structure”, Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), 2017 19th International Conference on, pp. 1863-1866, 2017.
[28] S. Tomincasa, M. Repetto, E. Bonisoli, F. Di Monacol, “Energy harvester for vehicle tires: Nonlinear dynamics and experimental outcomes”, J. Intel. Mat. Sys. & Struc., vol. 23, pp. 3-13, February. 2012.
[29] Y. J. Wang, C. D. Chen, C. C. Lin, J. H. Yu, “A nonlinear suspended energy harvester for a tire pressure monitoring system.”, Micromachines, 6, pp. 312–327, 2015.
[30] Q. Wang, Y. Zhang, N. Sun, J. McDaniel, M. Wang, “High power density energy harvester with high permeability magnetic material embedded in a rotating wheel”, Proc. of SPIE, vol. 8347, 83470V-1, 2012.
[31] S. Lee, D. H. Kim, “Durable and Sustainable Strap Type Electromagnetic Harvester for Tire Pressure Monitoring System”, Journal of Magnetics, vol. 18, no. 4, pp. 473-480, 2013.
[32] A. S. Holmes, G. Hong, K. R. Pullen, “Axial-flux permanent magnet machines for micropower generation”, J. Microelectromech. Syst., vol. 14, no. 1, pp. 54-62, Feb. 2005.
[33] D. A. Wang, C. Y. Chiu, H. T. Pham, “Electromagnetic energy harvesting from vibrations induced by Karman vortex street”, Mechatronics, vol. 22, no. 6, pp. 746-756, 2012.
[34] E. D. Ramirez, “Energy harvesting from body motion using rotational micro-generation”, PhD Thesis, Michigan Technological University, Houghton, MI, 2010.
[35] Y. J. Chen, C. T. Pan, Z. H. Liu, “Analysis of an in-plane micro-generator with various microcoil shapes”, Microsyst. Technol., 19, pp. 43–52, 2013.
[36] C. T. Pan, T. T. Wu, “Development of a rotary electromagnetic microgenerator”, J. Micromech. Microeng., vol. 17, no. 1, pp. 120-128, Jan. 2007.
[37] D. Zhu, S. Beeby, J. Tudor, N. Harris, “Increasing output power of electromagnetic vibration energy harvesters using improved Halbach arrays”, Sens. Actuators A Phys., vol. 203, pp. 11-19, Dec. 2013.
[38] D. Zhu, S. Beeby, J. Tudor, N. Harris, “Vibration energy harvesting using the Halbach array”, Smart Mater. Struct., vol. 21, 2012.
[39] P. S. Weng, H. Y. Tang, P. C. Ku, L. H. Lu, "50 mV-Input batteryless boost converter for thermal energy harvesting", IEEE J. Solid-State Circuits, vol. 48, no. 4, pp. 1031-1041, Apr. 2013.
[40] 陳星兆,「基於Cockcroft-Walton倍壓電路具功率因數修正之柔性切換高升壓比交流-直流轉換器」,國立台灣科技大學,碩士論文,民國102年。
[41] 曾重仁,江沅晉,李達生,黃衍任,張仍奎,儲能技術概論,國立中央大學,台灣,第一版
[42] L. Du, G. Shi and J. Zhao, “Review of micro magnetic generator”, Sensors & Transducers, pp. 1-12, 2014.
[43]Y. Tan, Y. Dong, X. Wang, “Review of MEMS electromagnetic vibration energy harvester”, J. Microelectromech. Syst., vol. 26, no. 1, pp. 1-16, Feb. 2017.
[44] C. Cepnik, R. Lausecker and U. Wallrabe, “Review on Electrodynamic Energy Harvesters-A Classification Approach Laboratory of Micro Actuators”, Micromachines, 4, pp. 168-196, 2013.
[45] C. B. Williams, and R. B. Yates, “Analysis of a micro-electric generator for microsystems,” Sensors and Actuators A: Physical, vol. 52, iss. 1-3, pp. 8-11, 1996.
[46] S. P. Beeby, R. N. Torah, M. J. Tudor, P. Glynne-Jones, T. O′Donnell, C. R. Saha, S. Roy, “A micro electromagnetic generator for vibration energy harvesting”, J. Micromech. Microeng., vol. 17, no. 7, p. 1257, 2007.
[47] I. Sari, T. Balkan H. Kulah, “An electromagnetic micro power generator for wideband environmental vibrations”, Sensors and Actuators A: Physical, vols. 145–146, pp. 405–413, Jul/Aug. 2008.
[48] P. Wang, K. Tanaka, S. Sugiyama, X. Dai, X. Zhao, J. Liu, “A micro electromagnetic low level vibration energy harvester based on MEMS technology”, Microsyst. Technol., vol. 15, no. 6, pp. 941–951, 2009.
[49] S. Roundy, E. Takahashi, “A planar electromagnetic energy harvesting transducer using a multi-pole magnetic plate”, Sensors and Actuators A: Physical, vol. 195, pp. 98–104, Jun. 2013.
[50] S. Roundy, P. K. Wright, J. Rabaye, “A study of low level vibrations as a power source for wireless sensor nodes”, Computer Communications, 26, pp. 1131–1144, 2003.
[51] Q. Zhang, Y. Wang, L. Zhao, E. S. Kim, “Integration of microfabricated low resistance and thousand turn coils for vibration energy harvesting”, J. Micromech. Mircoeng., 26, pp. 1–10, 2016.
[52] K. Tao, G. Ding, P. Wang, Z. Yang, Y. Wang, “Fully integrated micro electromagnetic vibration energy harvesters with micro-patterning of bonded magnets”, In Proceedings of the 2012 IEEE 25th International Conference on Micro Electro Mechanical Systems (MEMS), Paris, France, pp. 1237–1240, 29 January–2 February 2012.
[53] D. Hoffmann, C. Kallenbach, M. Dobmaier, B. Folkmer, Y. Manoli, “Flexible polyimide film technology for vibration energy harvesting”, In Proceedings of the Power-MEMS 2009, Washington, DC, USA, 1–4, pp. 455–458, December. 2009.
[54] Q. Zhang, E. S. Kim, “Micromachined energy-harvester stack with enhanced electromagnetic induction through vertical integration of magnets”, J. Microelectromech. Syst., 24, pp. 384–394, 2015.
[55] I. Sari, T. Balkan, H. Kulah, “An electromagnetic micro power generator for low-frequency environmental vibrations based on the frequency upconversion technique”, J. Microelectromech. Syst., 19, pp. 14–27, 2010.
[56] N. Wang, D. P. Arnold, “Fully batch-fabricated MEMS magnetic vibrational energy harvesters”, Proc. PowerMEMS, pp. 348-351, 2009.
[57] N. N. H. Ching, H. Y. Wong, W. J. Li, P. H. W. Leong, Z. Wen, “A laser-micromachined multi-modal resonating power transducer for wireless sensing systems”, Sens. Actuators A Phys., 97, pp. 685–690, 2002.
[58] Q. Zhang, S. J. Chen, L. Baumgartel, A. Lin, E. S. Kim, “Microelectromagnetic energy harvester with integrated magnets”, In Proceedings of the 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference (TRANSDUCERS), Beijing, China, 5–9, pp. 1657–1660, June 2011.
[59] B. E. Volland, H. Heerlein, I. W. Rangelow, “Electrostatically drivenmicrogripper”, Microelectron. Eng., 61, pp. 1015–1023, 2003.
[60] C. J. Kim, A. P. Pisano, R. S. Muller, “Silicon-processed overhanging microgripper”, J. Microelectromech. Syst., vol. 1, no. 1, pp. 31–36, 1992.
[61] T. Chen, L. Sun, L. Chen, W. Rong, and X. Li, “A hybrid-type electrostatically driven microgripper with an integrated vacuum tool”, Sensors and Actuators A: Physical, vol. 158, no. 2, pp. 320-327, 2010.
[62] J. Giouroudi, H. Hotzendorfer, J. Kosel, D. Andrijasevic, W. Brenner, “Development of a microgripping system for handling of microcomponents”, Precision Engineering, vol. 32, no. 2, pp. 147-152, 2008.
[63] M. C. Carrozza, A. Menciassi, G. Tiezzi, P. Dario, “The development of a LIGA-microfabricated gripper for micromanipulation tasks”, J. Micromech.Microeng., 8, pp. 141–143, 1998.
[64] S. K. Nah, Z. W. Zhong, “A microgripper using piezoelectric actuation formicro-object manipulation”, Sensors and Actuators A: Physical, vol. 133, no. 1, pp. 218–224, 2007.
[65] M. R. A. Raghavendra, A. S. Kumar, B. Jagdish, “Design and analysis of flexure-hinge parameter in microgripper”, The International Journal of Advanced Manufacturing Technology, vol. 49, pp. 1185-1193, 2010.
[66] L. Dodd, S. Ward, M. Cooke, D. Wood, “The static and dynamic response of SU-8 electrothermal microgrippers of varying thickness”, Microelectronic Engineering, vol. 145, pp. 82-85, 2015.
[67] M. H. Al-Zandi, R. C. Voicu, R. Muller, C. Wang, “Testing and Characterisation of Electrothermal Microgrippers with Embedded Microheaters”, Proc. Conf. Design Test Integration & Packaging of MEMS/MOEMS (DTIP), pp. 256-260, 2016.
[68] R. C. Voicu “Design, numerical simulation and experimental investigation of an SU-8 microgripper based on the cascaded V-shaped electrothermal actuators”, J Phys Conf Series (JPCS), vol. 757, no. 1, p. 012015, 2016.
[69] Z. Wang, X. Shen, X. Chen, “Design modeling and characterization of a MEMS electrothermal microgripper”, Microsystem Technologies, vol. 21, no. 11, pp. 2307-2314, 2015.
[70] A. Deutschinger, U. Schmid, M. Schneider, W. Brenner, H. Wanzenbock, B. Volland, T. Ivanov, and I. W. Rangelow, “Characterization of an electro-thermal micro gripper and tipsharpening using FIB technique”, Microsyst. Technol., vol. 16, pp. 1901-1908, 2010.
[71] I. Roch, Ph. Bidaud, D. Collard, L. Buchaillot, “Fabrication and characterizationof an SU-8 gripper actuated by a shape memory alloy thin film”, J. Micromech.Microeng, vol. 13, no. 2, pp. 330–336, 2003.
[72] M. Kohl, B. Krevet, E. Just, “SMA microgripper system”, Sensors and Actuators A: Physical, vol. 97-98, pp. 646-652, 2002.
[73] M. S. Mohamed Ali, K. Takahata, “Frequency-controlled wireless shape-memory-alloy microactuators integrated using an electroplating bonding process”, Sensors and Actuators A: Physical, vol. 163, no. 1, pp. 363-372, 2010.
[74] J. S. Lee and S. Lucyszyn, “Design and pressure analysis for bulk- micromachined electrothermal hydraulic microactuators using a PCM”, Sensors and Actuators A: Physical, vol. 133, no. 2, pp. 294-300, 2007.
[75] K. Yoshida, N. Tsukamoto, J.-w. Kim, S. Yokota, "A study on a soft microgripper using MEMS-based divided electrode type flexible electrorheological valves", Mechatronics, vol. 29, pp. 103-109, 2015.
[76]楊啟榮,「微致動器原理與應用技術」,國立臺灣師範大學,教學投影片
[77] W. Riethmuller, W. Benecke, “Thermally excited silicon microactuators”, IEEE Transactions on Electron Devices, vol. 35, no. 6, pp. 758-763, 1988.
[78] H. Guckel, J Klein, T. Chistenson, K. Skrobis, M. Laudon, E. G. Lovell, “Thermo-magnetic metal flexture actuators”, Technical digest of IEEE sensor and actuator workshop, Hilton Head Island, USA, pp. 73-75, June 1992.
[79] L. Que, J. Park, Y. Gianchandani, “Bent-beam electro-thermal actuators for high force applications”, Proc. IEEE International Conference on Micro Electro Mechanical Systems, Orlando, USA, pp. 31-36, 1999.
[80] Y. Shabany, “Heat Transfer: Thermal Management of Electronics”, CRC Press, 2009.
[81] J. J. Brown, V. M. Bright, “Thermal actuators”, in: Encyclopedia ofNanotechnology, Springer, Netherlands, pp. 2680–2697, 2012.
[82] 朱雯婷,「單一自由度微型電熱鑷子之設計與分析」,國立中央大學,碩士論文,民國106年。 |