參考文獻 |
[1] T. Miclau and R. Martin, "The evolution of modern plate osteosynthesis." Injury, 28, A3-A6, 1997.
[2] S. Mehmood, U. Ansari, M. N. Ali and N. F. Rana, "Internal fixation: An evolutionary appraisal of methods used for long bone fractures." International Journal of Biomedical and Advance Research, 5, 3, 142-149, 2014.
[3] J. Schatzker, "Osteosynthesis in trauma." International Orthopaedics, 20, 4, 244-252, 1996.
[4] R. M. Greenhagen, A. R. Johnson and A. Joseph, "Internal fixation: a historical review." Clinics in podiatric medicine and surgery, 28, 4, 607-618, 2011.
[5] S. R. Lathan, "Dr. Halsted at Hopkins and at High Hampton." Proceedings (Baylor University. Medical Center), 23, 1, 33, 2010.
[6] W. A. Lane, "Some remarks on the treatment of fractures." British medical journal, 1, 1790, 861, 1895.
[7] H. K. Uhthoff, P. Poitras and D. S. Backman, "Internal plate fixation of fractures: short history and recent developments." Journal of Orthopaedic Science, 11, 2, 118-126, Aug 2006.
[8] L. F. Peltier, Fractures: A History and Iconography of Their Treatment. Norman Pub., 1990.
[9] R. Danis, Théorie et pratique de l′ostéosynthèse. Masson, Paris, 1949.
[10] A. E. Freeland, M. E. Jabaley and J. L. Hughes, Stable Fixation of the Hand and Wrist. Springer New York, 2012.
[11] F. Povacz, Geschichte der Unfallchirurgie. Springer Berlin Heidelberg, 2008.
[12] P. Vichard and E. Gagneux, "Il ya 100 ans: les premiers pas de l’ostéosynthèse des fractures." Histoire des sciences médicales, 29, 2-1995, 1995.
[13] B. D. Browner, J. B. Jupiter, C. Krettek and P. A. Anderson, Skeletal Trauma. Elsevier Health Sciences, 2014.
[14] S. M. Perren and J. S. Buchanan, "Basic concepts relevant to the design and development of the point contact fixator (PC-Fix)." Injury, 26, B1-B4, 1995.
[15] A. Remiger, M. Predieri, S. Tepic and S. Perren, "Internal Fixation Using the Point Contact Plate: An In-Vivo Study in Sheep." Journal of Orthopaedic Trauma, 7, 2, 176, 1993.
[16] S. Tepic, A. R. Remiger, K. Morikawa, M. Predieri and S. M. Perren, "Strength recovery in fractured sheep tibia treated with a plate or an internal fixator: an experimental study with a two-year follow-up." Journal of orthopaedic trauma, 11, 1, 14-23, 1997.
[17] M. Schuetz, M. Müller, C. Krettek, D. Höntzsch, P. Regazzoni, R. Ganz and N. Haas, "Minimally invasive fracture stabilization of distal femoral fractures with the LISS: A prospective multicenter study results of a clinical study with special emphasis on difficult cases." Injury, 32, 48-54, 2001.
[18] S. Tepic and S. Perren, "The biomechanics of the PC-Fix internal fixator." Injury, 26, B5-B10, 1995.
[19] P. Schandelmaier, C. Stephan, N. Reimers and C. Krettek, "LISS-Osteosynthese von distalen Femurfrakturen." Trauma und Berufskrankheit, 1, 4, 392-397, 1999.
[20] R. Frigg, "Locking compression plate (LCP). An osteosynthesis plate based on the dynamic compression plate and the point contact fixator (PC-Fix)." Injury, 32, 63-66, 2001.
[21] K. Tayton, C. Johnson-Nurse, B. McKibbin, J. Bradley and G. Hastings, "The use of semi-rigid carbon-fibre-reinforced plastic plates for fixation of human fractures. Results of preliminary trials." Bone and Joint Journal, 64-B, 1, 105-111, 1982.
[22] C. Igna and L. Schuszler, "Current concepts of internal plate fixation of fractures." Bulletin UASVM, Veterinary Medicine, 67, 2, 118-124, 2010.
[23] P. Schandelmaier, A. Partenheimer, B. Koenemann, O. Grün and C. Krettek, "Distal femoral fractures and LISS stabilization." Injury, 32, 55-63, 2001.
[24] D. L. Miller and T. Goswami, "A review of locking compression plate biomechanics and their advantages as internal fixators in fracture healing." Clinical Biomechanics, 22, 10, 1049-1062, 2007.
[25] C. Alemdar, I. Azboy, R. Atic, E. Ozkul, M. Gem and A. Kapukaya, "Management of infectious fractures with “Non-Contact Plate”(NCP) method." Acta Orthop Belg, 81, 3, 523-529, 2015.
[26] G. S. Leventhal, "Titanium, a metal for surgery." J Bone Joint Surg Am, 33, 2, 473-474, 1951.
[27] N. Patil, K. Lee and S. B. Goodman, "Porous tantalum in hip and knee reconstructive surgery." Journal of Biomedical Materials Research Part B: Applied Biomaterials, 89, 1, 242-251, 2009.
[28] B. Gasser, "About composite materials and their use in bone surgery." Injury, 31, D48-D53, 2000.
[29] B. R. Simon, S. L. Y. Woo, G. M. Stanley, S. R. Olmstead, M. P. McCarty, G. F. Jemmott and W. H. Akeson, "Evaluation of one-, two-, and three-dimensional finite element and experimental models of internal fixation plates." Journal of Biomechanics, 10, 2, 79-86, 1977/01/01 1977.
[30] K. Ramakrishna, I. Sridhar, S. Sivashanker, K. S. Khong and D. N. Ghista, "Design of fracture fixation plate for necessary and sufficient bone stress shielding." JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing, 47, 4, 1086-1094, 2004.
[31] K. Ramakrishna, I. Sridhar, S. Sivashanker, V. Ganesh and D. Ghista, "Analysis of an internal fixation of a long bone fracture." Journal of Mechanics in Medicine and Biology, 5, 01, 89-103, 2005.
[32] D. Ghista, Applied Biomedical Engineering Mechanics. CRC Press, 2008.
[33] J. Wieding, R. Souffrant, A. Fritsche, W. Mittelmeier and R. Bader, "Finite element analysis of osteosynthesis screw fixation in the bone stock: an appropriate method for automatic screw modelling." PLoS One, 7, 3, e33776, 2012.
[34] T. P. James and B. A. Andrade, "Modeling Bicortical Screws Under a Cantilever Bending Load." Journal of biomechanical engineering, 135, 12, 124502, 2013.
[35] C. Avery, P. Bujtár, J. Simonovics, T. Dézsi, K. Váradi, G. K. Sándor and J. Pan, "A finite element analysis of bone plates available for prophylactic internal fixation of the radial osteocutaneous donor site using the sheep tibia model." Medical engineering & physics, 35, 10, 1421-1430, 2013.
[36] C. M. E. Avery, M. Skidmore, A. Peden and J. Pan, "Biomechanical study of a unilocking T-plate system for prophylactic internal fixation of the radial osteocutaneous donor site using the sheep tibia model." Oral Oncology, 47, 4, 268-273, 4 2011.
[37] P. Kenedi and L. L. Vignoli, "Ostheosynthesis plate: analytical and finite element approaches." XXIV Brazilian Congress of Biomedical Engineering—CBEB, 2014.
[38] J. M. Gere and S. P. Timoshenko, Mechanics of materials. PWS Pub Co., 1997.
[39] J. Cordey, S. Perren and S. Steinemann, "Stress protection due to plates: myth or reality? A parametric analysis made using the composite beam theory." Injury, 31, 178838791-13, 2000.
[40] M. Pendergast and R. Rusovici, "A finite element parametric study of clavicle fixation plates." International journal for numerical methods in biomedical engineering, 31, 6, 2015.
[41] A. G. Tsai, T. Ashworth and O. Akkus, "Strength of Materials Based Prediction of Critical Stresses at the Proximal Femur: Validation by Finite Element Analysis." ASME 2013 Summer Bioengineering Conference, V01AT09A006; 2 pages, Sunriver, Oregon, USA, June 2013.
[42] H. M. Frost, "Wolff′s Law and bone′s structural adaptations to mechanical usage: an overview for clinicians." The Angle Orthodontist, 64, 3, 175-188, 1994.
[43] G. Hastings, "Biomedical engineering and materials for orthopaedic implants." Journal of physics E: Scientific instruments, 13, 6, 599, 1980.
[44] K. A. Egol, E. N. Kubiak, E. Fulkerson, F. J. Kummer and K. J. Koval, "Biomechanics of locked plates and screws." Journal of orthopaedic trauma, 18, 8, 488-493, 2004.
[45] L. E. Claes, C. A. Heigele, C. Neidlinger-Wilke, D. Kaspar, W. Seidl, K. J. Margevicius and P. Augat, "Effects of mechanical factors on the fracture healing process." Clinical orthopaedics and related research, 355, S132-S147, 1998.
[46] S. Perren, "Physical and biological aspects of fracture healing with special reference to internal fixation." Clinical orthopaedics and related research, 138, 175-196, 1979.
[47] H. Gray and W. H. Lewis, Anatomy of the Human Body. Lea & Febiger, 1918.
[48] V. K. Ganesh, K. Ramakrishna and D. N. Ghista, "Biomechanics of bone-fracture fixation by stiffness-graded plates in comparison with stainless-steel plates." Biomed Eng Online, 4, 46, Jul 2005.
[49] G. Mohammad, H. Zamanian, B. Marzban and S. Amoozegar, "Investigation of the Stress Distribution in a Bone Due to Screws Pretensions of the Bone Plate." Dep. of Biomedical Eng., Amirkabir University of Tech, 2013.
[50] S. Benli, S. Aksoy, H. Havitcioglu and M. Kucuk, "Evaluation of bone plate with low-stiffness material in terms of stress distribution." J Biomech, 41, 15, 3229-35, Nov 2008.
[51] H. Fouad, "Assessment of function-graded materials as fracture fixation bone-plates under combined loading conditions using finite element modelling." Med Eng Phys, 33, 4, 456-63, May 2011.
[52] H. Fouad, "Effects of the bone-plate material and the presence of a gap between the fractured bone and plate on the predicted stresses at the fractured bone." Med Eng Phys, 32, 7, 783-9, Sep 2010.
[53] T. P. Rüedi and W. M. Murphy, AO Principles of Fracture Management. AO Publishing, 2000.
[54] 王明暄, 電腦輔助長骨創傷手術骨板置放與模擬, 國立中央大學, 碩士論文, 民國102年.
[55] R. Compton and J. Mason, Fatigue Strength of Zimmer Periarticular Locking Plates, I. Zimmer Biomet Holdings, 2009.
[56] L. D. Zardiackas, "Stainless Steels for Implants." Wiley Encyclopedia of Biomedical Engineering, 2006.
[57] R. Hibbeler, Statics and Mechanics of Materials. Pearson Education Canada, 2014.
[58] W. B. Hildreth, Case Studies in Public Budgeting and Financial Management, Revised and Expanded. Taylor & Francis, 2003.
[59] D. L. Waller, Operations Management: A Supply Chain Approach. Thomson Learning, 2003.
[60] S. Nasr, S. Hunt and N. A. Duncan, "Effect of screw position on bone tissue differentiation within a fixed femoral fracture." Journal of Biomedical Science and Engineering, 6, 12, 71-83, 2013. |