參考文獻 |
[1] 楊志明,組織工程,九州圖書,民國94年。
[2] Y. S. Nam and T. G. Park, “Porous Biodegradable Polymeric Scaffolds Prepared by Thermally Induced Phase Separation”, Journal of Biomedical Materials Research. Part A, Vol. 47, pp.8-17, 1999.
[3] A. G. Mikos, G. Sarakinos, S. M. Leite, J. P. Vacant and R. Langer, “Laminated Three-dimensional Biodegradable Foams for Use in Tissue Engineering”, Biomaterials, Vol. 14, pp.323-330, 1993.
[4] D. C. Sin, X. Miao, G. Liu, F. Wei, G. Chadwick, C. Yan and T. Friis, “Polyurethane (PU) Scaffolds Prepared by Solvent Casting/Particulate Leaching (SCPL) Combined with Centrifugation”, Materials Science and Engineering: C, Vol. 30, pp.78-85, 2010.
[5] D. W. Hutmacher, T. Schantz, I. Zein, K. W. Ng, S. H. Teoh and K. C. Tan, “Mechanical Properties and Cell Cultural Response of Polycaprolactone Scaffolds Designed and Fabricated via Fused Deposition Modeling”, Journal of Biomedical Materials Research Part A, Vol. 55, pp.203-216, 2001.
[6] H. J. Yen, S. H. Hsu, C. S. Tseng, J. P. Huang and C. L. Tsai, “Fabrication of Precision Scaffolds Using Liquid-frozen Deposition Manufacturing for Cartilage Tissue Engineering”, Tissue Engineering Part A, Vol. 15, pp.965-975, 2009.
[7] Z. Xiong, Y. Yan, S. Wang, R. Zhang and C. Zhang, “Fabrication of Porous Scaffolds for Bone Tissue Engineering via Low-temperature Deposition”, Scripta Materialia, Vol. 46, pp.771-776, 2002.
[8] L. Liu, Z. Xiong, Y. Yan, R. Zhang, X. Wang and L. Jin, “Multinozzle Low-temperature Deposition System for Construction of Gradient Tissue Engineering Scaffolds”, Journal of Biomedical Materials Research, Vol. 88B, pp.254-263, 2009.
[9] C. B. Pham, K. F. Leong, T. C. Lim and K. S. Chian, “Rapid Freeze Prototyping Technique in Bio-plotters for Tissue Scaffold Fabrication”, Rapid Prototyping Journal, Vol. 14, pp.246-253, 2008.
[10] G. H. Kim, S. H. Ahn, H. Yoon, Y. Y. Kim and W. Chun, “A Cryogenic Direct-plotting System for Fabrication of 3D Collagen Scaffolds for Tissue Engineering”, Journal of Materials Chemistry, Vol. 19, pp.8817-8823, 2009.
[11] N. D. Doiphode, T. Huang, M. C. Leu, M. N. Rahaman and D. E. Day, “Freeze Extrusion Fabrication of 13–93 Bioactive Glass Scaffolds for Bone Repair”, Journal of Materials Science: Materials in Medicine, Vol. 22, pp.515-523, 2011.
[12] W. Zhang, M. C. Leu, Z. Ji and Y. Yan, “Rapid Freezing Prototyping with Water”, Materials & Design, Vol. 20, pp.139-145, 1999.
[13] Q. Liu and M. C. Leu, “Finite Element Analysis of Solidification in Rapid Freeze Prototyping”, Journal of Manufacturing Science and Engineering, Vol. 129, pp.810-820, 2007.
[14] S. Ma, X.Zheng, C. Zhang, H. Wang and H. Li, “Gelatin-Sodium Alginate Hydrogel Processing by Low-Temperature 3D Printing”, Intelligent Robotics and Applications, Vol. 1, pp.525-529, 2015.
[15] C. Y. Liu, Y. Li, L. Zhang, S. Mi, Y. Y. Xu and W. Sun, “Development of A Novel Low-temperature Deposition Machine Using Screw Extrusion to Fabricate Poly (L-lactide-co-glycolide) Acid Scaffolds”, Journal of Engineering in Medicine, Vol. 228, pp.593-606, 2014.
[16] J. S. Lee, J. M. Hong, J. W. Jung, J. H. Shim, J. H. Oh and D. W. Cho, “3D Printing of Composite Tissue with Complex Shape Applied to Ear Regeneration”, Biofabrication, Vol. 6, pp.103-115, 2014.
[17] Y. Liu, S. Fang, Z. Han, Y. Liu and Y. Yu, “Pneumatic feeding system for low-temperature deposition manufacturing based on system idenitification”, Virtual and Physical prototyping, Vol.8, pp.5-6, 2013.
[18] 林研聖,「冷凍成型積層製造之機台設計與組織工程支架製作參數調校研究」,國立中央大學,碩士論文,民國104年。
[19] C. H. Lin, J. M. Su and S. H. Hsu, “Evaluation of Type II Collagen Scaffolds Reinforced by Poly(ε-Caprolactone) as Tissue-engineered Trachea”, Tissue Engineering Part C: Methods, Vol. 14, pp.69-77, 2008.
[20] J. H. Park, J. M. Hong, Y. M. Ju, J. W. Jung, H. W. Kang, S. J. Lee, J. J. Yoo, S. W. Kim, S. H. Kim and D. W. Cho, “A Novel Tissue-engineered Trachea with A Mechanical Behavior Similar to Native Trachea”, Biomaterials, Vol. 62, pp.106-115, 2015.
[21] R. J. Morrison, S. J. Hollister, M. F. Niedner, M. G. Mahani, A. H. Park, D. K. Mehta, R. G. Ohye and G. E. Green, “Mitigation of Tracheobronchomalacia with 3D-printed Personalized Medical Devices in Pediatric Patients”, Science Translational Medicine, Vol. 7, pp. 285-296, 2015.
[22] G. H. Wu and S. H. Hsu, “Review: Polymeric-Based 3D Printing for Tissue Engineering”, Journal of Medical and Biological Engineering, Vol. 35, pp.285-292, 2015.
[23] B. Dhariwala, E. Hunt and T. Boland, “Rapid Prototyping of Tissue-engineering Constructs, Using Photopolymerizable Hydrogels and Stereolithography”, Tissue Engineering, Vol. 10, pp.1316-1322, 2004.
[24] C. Shuai, Z. Mao, H. Lu, Y. Nie, H. Hu and S. Peng, “Fabrication of Porous Polyvinyl Alcohol Scaffold for Bone Tissue Engineering Via Selective Laser Sintering”, Biofabrication, Vol. 5, 015014, 2013.
[25] 吳偉任,「組織工程用冷凍成型積層製造之固態水支撐結構生成研究」,國立中央大學,碩士論文,民國105年。
[26] H.Yen, S. Hsu, C. Tseng, J.Huang and ChingLin, “Fabrication of Precision Scaffold Using Liquid-Frozen Deposition Manufacturing for Cartilage Tissue Engineering”, Tissue Engineering ,Vol.15,pp.966-967, 2009.
[27] 杜方傑,「組織工程用冷凍成型製造系統之自動化製作流程開發」,國立中央大學,碩士論文,民國104年。 |